Signed-off-by: Kevin Cernekee <cernekee@xxxxxxxxx>
---
drivers/tty/serial/Kconfig | 24 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/rp2.c | 892 ++++++++++++++++++++++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
4 files changed, 920 insertions(+)
create mode 100644 drivers/tty/serial/rp2.c
V2->V3 changes:
- Don't try to unregister the device if rp2_fw_cb() fails
- Add MODULE_FIRMWARE declaration
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 59c23d0..555f3ca 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1447,4 +1447,28 @@ config SERIAL_ARC_NR_PORTS
Set this to the number of serial ports you want the driver
to support.
+config SERIAL_RP2
+ tristate "Comtrol RocketPort EXPRESS/INFINITY support"
+ depends on PCI
+ select SERIAL_CORE
+ help
+ This driver supports the Comtrol RocketPort EXPRESS and
+ RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
+ These adapters use a "RocketPort 2" ASIC that is not compatible
+ with the original RocketPort driver (CONFIG_ROCKETPORT).
+
+ To compile this driver as a module, choose M here: the
+ module will be called rp2.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a suitable RocketPort card installed, say N.
+
+config SERIAL_RP2_NR_UARTS
+ int "Maximum number of RocketPort EXPRESS/INFINITY ports"
+ depends on SERIAL_RP2
+ default "32"
+ help
+ If multiple cards are present, the default limit of 32 ports may
+ need to be increased.
+
endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index df1b998..a582ee9 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -83,3 +83,4 @@ obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
+obj-$(CONFIG_SERIAL_RP2) += rp2.o
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
new file mode 100644
index 0000000..535dd83
--- /dev/null
+++ b/drivers/tty/serial/rp2.c
@@ -0,0 +1,892 @@
+/*
+ * Driver for Comtrol RocketPort EXPRESS/INFINITY cards
+ *
+ * Copyright (C) 2012 Kevin Cernekee <cernekee@xxxxxxxxx>
+ *
+ * Inspired by, and loosely based on:
+ *
+ * ar933x_uart.c
+ * Copyright (C) 2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ *
+ * rocketport_infinity_express-linux-1.20.tar.gz
+ * Copyright (C) 2004-2011 Comtrol, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/completion.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/types.h>
+
+#define DRV_NAME "rp2"
+
+#define RP2_FW_NAME "rp2.fw"
+#define RP2_UCODE_BYTES 0x3f
+
+#define PORTS_PER_ASIC 16
+#define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1)
+
+#define UART_CLOCK 44236800
+#define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16))
+#define FIFO_SIZE 512
+
+/* BAR0 registers */
+#define RP2_FPGA_CTL0 0x110
+#define RP2_FPGA_CTL1 0x11c
+#define RP2_IRQ_MASK 0x1ec
+#define RP2_IRQ_MASK_EN_m BIT(0)
+#define RP2_IRQ_STATUS 0x1f0
+
+/* BAR1 registers */
+#define RP2_ASIC_SPACING 0x1000
+#define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING))
+
+#define RP2_PORT_BASE 0x000
+#define RP2_PORT_SPACING 0x040
+
+#define RP2_UCODE_BASE 0x400
+#define RP2_UCODE_SPACING 0x80
+
+#define RP2_CLK_PRESCALER 0xc00
+#define RP2_CH_IRQ_STAT 0xc04
+#define RP2_CH_IRQ_MASK 0xc08
+#define RP2_ASIC_IRQ 0xd00
+#define RP2_ASIC_IRQ_EN_m BIT(20)
+#define RP2_GLOBAL_CMD 0xd0c
+#define RP2_ASIC_CFG 0xd04
+
+/* port registers */
+#define RP2_DATA_DWORD 0x000
+
+#define RP2_DATA_BYTE 0x008
+#define RP2_DATA_BYTE_ERR_PARITY_m BIT(8)
+#define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9)
+#define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10)
+#define RP2_DATA_BYTE_BREAK_m BIT(11)
+
+/* This lets uart_insert_char() drop bytes received on a !CREAD port */
+#define RP2_DUMMY_READ BIT(16)
+
+#define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \
+ RP2_DATA_BYTE_ERR_OVERRUN_m | \
+ RP2_DATA_BYTE_ERR_FRAMING_m | \
+ RP2_DATA_BYTE_BREAK_m)
+
+#define RP2_RX_FIFO_COUNT 0x00c
+#define RP2_TX_FIFO_COUNT 0x00e
+
+#define RP2_CHAN_STAT 0x010
+#define RP2_CHAN_STAT_RXDATA_m BIT(0)
+#define RP2_CHAN_STAT_DCD_m BIT(3)
+#define RP2_CHAN_STAT_DSR_m BIT(4)
+#define RP2_CHAN_STAT_CTS_m BIT(5)
+#define RP2_CHAN_STAT_RI_m BIT(6)
+#define RP2_CHAN_STAT_OVERRUN_m BIT(13)
+#define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16)
+#define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17)
+#define RP2_CHAN_STAT_CD_CHANGED_m BIT(18)
+#define RP2_CHAN_STAT_RI_CHANGED_m BIT(22)
+#define RP2_CHAN_STAT_TXEMPTY_m BIT(25)
+
+#define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \
+ RP2_CHAN_STAT_CTS_CHANGED_m | \
+ RP2_CHAN_STAT_CD_CHANGED_m | \
+ RP2_CHAN_STAT_RI_CHANGED_m)
+
+#define RP2_TXRX_CTL 0x014
+#define RP2_TXRX_CTL_MSRIRQ_m BIT(0)
+#define RP2_TXRX_CTL_RXIRQ_m BIT(2)
+#define RP2_TXRX_CTL_RX_TRIG_s 3
+#define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_EN_m BIT(5)
+#define RP2_TXRX_CTL_RTSFLOW_m BIT(6)
+#define RP2_TXRX_CTL_DTRFLOW_m BIT(7)
+#define RP2_TXRX_CTL_TX_TRIG_s 16
+#define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_DSRFLOW_m BIT(18)
+#define RP2_TXRX_CTL_TXIRQ_m BIT(19)
+#define RP2_TXRX_CTL_CTSFLOW_m BIT(23)
+#define RP2_TXRX_CTL_TX_EN_m BIT(24)
+#define RP2_TXRX_CTL_RTS_m BIT(25)
+#define RP2_TXRX_CTL_DTR_m BIT(26)
+#define RP2_TXRX_CTL_LOOP_m BIT(27)
+#define RP2_TXRX_CTL_BREAK_m BIT(28)
+#define RP2_TXRX_CTL_CMSPAR_m BIT(29)
+#define RP2_TXRX_CTL_nPARODD_m BIT(30)
+#define RP2_TXRX_CTL_PARENB_m BIT(31)
+
+#define RP2_UART_CTL 0x018
+#define RP2_UART_CTL_MODE_s 0
+#define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s)
+#define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s)
+#define RP2_UART_CTL_FLUSH_RX_m BIT(3)
+#define RP2_UART_CTL_FLUSH_TX_m BIT(4)
+#define RP2_UART_CTL_RESET_CH_m BIT(5)
+#define RP2_UART_CTL_XMIT_EN_m BIT(6)
+#define RP2_UART_CTL_DATABITS_s 8
+#define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_STOPBITS_m BIT(10)
+
+#define RP2_BAUD 0x01c
+
+/* ucode registers */
+#define RP2_TX_SWFLOW 0x02
+#define RP2_TX_SWFLOW_ena 0x81
+#define RP2_TX_SWFLOW_dis 0x9d
+
+#define RP2_RX_SWFLOW 0x0c
+#define RP2_RX_SWFLOW_ena 0x81
+#define RP2_RX_SWFLOW_dis 0x8d
+
+#define RP2_RX_FIFO 0x37
+#define RP2_RX_FIFO_ena 0x08
+#define RP2_RX_FIFO_dis 0x81
+
+static struct uart_driver rp2_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = DRV_NAME,
+ .dev_name = "ttyRP",
+ .nr = CONFIG_SERIAL_RP2_NR_UARTS,
+};
+
+struct rp2_card;
+
+struct rp2_uart_port {
+ struct uart_port port;
+ int idx;
+ int ignore_rx;
+ struct rp2_card *card;
+ void __iomem *asic_base;
+ void __iomem *base;
+ void __iomem *ucode;
+};
+
+struct rp2_card {
+ struct pci_dev *pdev;
+ struct rp2_uart_port *ports;
+ int n_ports;
+ int initialized_ports;
+ int minor_start;
+ int smpte;
+ void __iomem *bar0;
+ void __iomem *bar1;
+ spinlock_t card_lock;
+ struct completion fw_loaded;
+};
+
+#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
+#define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0))
+
+static inline void rp2_decode_cap(const struct pci_device_id *id,
+ int *ports, int *smpte)
+{
+ *ports = id->driver_data >> 8;
+ *smpte = id->driver_data & 0xff;
+}
+
+static DEFINE_SPINLOCK(rp2_minor_lock);
+static int rp2_minor_next;
+
+static int rp2_alloc_ports(int n_ports)
+{
+ int ret = -ENOSPC;
+
+ spin_lock(&rp2_minor_lock);
+ if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) {
+ /* sorry, no support for hot unplugging individual cards */
+ ret = rp2_minor_next;
+ rp2_minor_next += n_ports;
+ }
+ spin_unlock(&rp2_minor_lock);
+
+ return ret;
+}
+
+static inline struct rp2_uart_port *port_to_up(struct uart_port *port)
+{
+ return container_of(port, struct rp2_uart_port, port);
+}
+
+static void rp2_rmw(struct rp2_uart_port *up, int reg,
+ u32 clr_bits, u32 set_bits)
+{
+ u32 tmp = readl(up->base + reg);
+ tmp &= ~clr_bits;
+ tmp |= set_bits;
+ writel(tmp, up->base + reg);
+}
+
+static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val)
+{
+ rp2_rmw(up, reg, val, 0);
+}
+
+static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val)
+{
+ rp2_rmw(up, reg, 0, val);
+}
+
+static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num,
+ int is_enabled)
+{
+ unsigned long flags, irq_mask;
+
+ spin_lock_irqsave(&up->card->card_lock, flags);
+
+ irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK);
+ if (is_enabled)
+ irq_mask &= ~BIT(ch_num);
+ else
+ irq_mask |= BIT(ch_num);
+ writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK);
+
+ spin_unlock_irqrestore(&up->card->card_lock, flags);
+}
+
+static unsigned int rp2_uart_tx_empty(struct uart_port *port)
+{
+ struct rp2_uart_port *up = port_to_up(port);
+ unsigned long tx_fifo_bytes, flags;
+
+ /*
+ * This should probably check the transmitter, not the FIFO.
+ * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is
+ * enabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+ tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return tx_fifo_bytes ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int rp2_uart_get_mctrl(struct uart_port *port)
+{
+ struct rp2_uart_port *up = port_to_up(port);
+ u32 status;
+
+ status = readl(up->base + RP2_CHAN_STAT);
+ return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) |
+ ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) |
+ ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) |
+ ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0);
+}
+
+static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ rp2_rmw(port_to_up(port), RP2_TXRX_CTL,
+ RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m,
+ ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) |
+ ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) |
+ ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0));
+}
+
+static void rp2_uart_start_tx(struct uart_port *port)
+{
+ rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
+}
+
+static void rp2_uart_stop_tx(struct uart_port *port)
+{
+ rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
+}
+
+static void rp2_uart_stop_rx(struct uart_port *port)
+{
+ rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m);
+}
+
+static void rp2_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m,
+ break_state ? RP2_TXRX_CTL_BREAK_m : 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void rp2_uart_enable_ms(struct uart_port *port)
+{
+ rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m);
+}
+
+static void __rp2_uart_set_termios(struct rp2_uart_port *up,
+ unsigned long cfl,
+ unsigned long ifl,
+ unsigned int baud_div)
+{
+ /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */
+ writew(baud_div - 1, up->base + RP2_BAUD);
+
+ /* data bits and stop bits */
+ rp2_rmw(up, RP2_UART_CTL,
+ RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m,
+ ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) |
+ (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) |
+ (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) |
+ (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) |
+ (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0));
+
+ /* parity and hardware flow control */
+ rp2_rmw(up, RP2_TXRX_CTL,
+ RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m |
+ RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m |
+ RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m |
+ RP2_TXRX_CTL_CTSFLOW_m,
+ ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) |
+ ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) |
+ ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) |
+ ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m |
+ RP2_TXRX_CTL_CTSFLOW_m) : 0));
+
+ /* XON/XOFF software flow control */
+ writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis,
+ up->ucode + RP2_TX_SWFLOW);
+ writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis,
+ up->ucode + RP2_RX_SWFLOW);
+}
+
+static void rp2_uart_set_termios(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ struct rp2_uart_port *up = port_to_up(port);
+ unsigned long flags;
+ unsigned int baud, baud_div;
+
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+ baud_div = uart_get_divisor(port, baud);
+
+ if (tty_termios_baud_rate(new))
+ tty_termios_encode_baud_rate(new, baud, baud);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* ignore all characters if CREAD is not set */
+ port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ;
+
+ __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div);
+ uart_update_timeout(port, new->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void rp2_rx_chars(struct rp2_uart_port *up)
+{
+ u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT);
+ struct tty_struct *tty = tty_port_tty_get(&up->port.state->port);
+
+ if (!tty) {
+ /* Discard data: no tty available */
+ for (; bytes != 0; bytes--)
+ readw(up->base + RP2_DATA_BYTE);
+ return;
+ }
+
+ for (; bytes != 0; bytes--) {
+ u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ;
+ char ch = byte & 0xff;
+
+ if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) {
+ if (!uart_handle_sysrq_char(&up->port, ch))
+ uart_insert_char(&up->port, byte, 0, ch,
+ TTY_NORMAL);
+ } else {
+ char flag = TTY_NORMAL;
+
+ if (byte & RP2_DATA_BYTE_BREAK_m)
+ flag = TTY_BREAK;
+ else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m)
+ flag = TTY_FRAME;
+ else if (byte & RP2_DATA_BYTE_ERR_PARITY_m)
+ flag = TTY_PARITY;
+ uart_insert_char(&up->port, byte,
+ RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag);
+ }
+ up->port.icount.rx++;
+ }
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
+
+static void rp2_tx_chars(struct rp2_uart_port *up)
+{
+ u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT);
+ struct circ_buf *xmit = &up->port.state->xmit;
+
+ if (uart_tx_stopped(&up->port)) {
+ rp2_uart_stop_tx(&up->port);
+ return;
+ }
+
+ for (; max_tx != 0; max_tx--) {
+ if (up->port.x_char) {
+ writeb(up->port.x_char, up->base + RP2_DATA_BYTE);
+ up->port.x_char = 0;
+ up->port.icount.tx++;
+ continue;
+ }
+ if (uart_circ_empty(xmit)) {
+ rp2_uart_stop_tx(&up->port);
+ break;
+ }
+ writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+}
+
+static void rp2_ch_interrupt(struct rp2_uart_port *up)
+{
+ u32 status;
+
+ spin_lock(&up->port.lock);
+
+ /*
+ * The IRQ status bits are clear-on-write. Other status bits in
+ * this register aren't, so it's harmless to write to them.
+ */
+ status = readl(up->base + RP2_CHAN_STAT);
+ writel(status, up->base + RP2_CHAN_STAT);
+
+ if (status & RP2_CHAN_STAT_RXDATA_m)
+ rp2_rx_chars(up);
+ if (status & RP2_CHAN_STAT_TXEMPTY_m)
+ rp2_tx_chars(up);
+ if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+
+ spin_unlock(&up->port.lock);
+}
+
+static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id)
+{
+ void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
+ int ch, handled = 0;
+ unsigned long status = readl(base + RP2_CH_IRQ_STAT) &
+ ~readl(base + RP2_CH_IRQ_MASK);
+
+ for_each_set_bit(ch, &status, PORTS_PER_ASIC) {
+ rp2_ch_interrupt(&card->ports[ch]);
+ handled++;
+ }
+ return handled;
+}
+
+static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id)
+{
+ struct rp2_card *card = dev_id;
+ int handled;
+
+ handled = rp2_asic_interrupt(card, 0);
+ if (card->n_ports >= PORTS_PER_ASIC)
+ handled += rp2_asic_interrupt(card, 1);
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static inline void rp2_flush_fifos(struct rp2_uart_port *up)
+{
+ rp2_rmw_set(up, RP2_UART_CTL,
+ RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
+ readl(up->base + RP2_UART_CTL);
+ udelay(10);
+ rp2_rmw_clr(up, RP2_UART_CTL,
+ RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
+}
+
+static int rp2_uart_startup(struct uart_port *port)
+{
+ struct rp2_uart_port *up = port_to_up(port);
+
+ rp2_flush_fifos(up);
+ rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m);
+ rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m,
+ RP2_TXRX_CTL_RX_TRIG_1);
+ rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
+ rp2_mask_ch_irq(up, up->idx, 1);
+
+ return 0;
+}
+
+static void rp2_uart_shutdown(struct uart_port *port)
+{
+ struct rp2_uart_port *up = port_to_up(port);
+ unsigned long flags;
+
+ rp2_uart_break_ctl(port, 0);
+
+ spin_lock_irqsave(&port->lock, flags);
+ rp2_mask_ch_irq(up, up->idx, 0);
+ rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *rp2_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL;
+}
+
+static void rp2_uart_release_port(struct uart_port *port)
+{
+ /* Nothing to release ... */
+}
+
+static int rp2_uart_request_port(struct uart_port *port)
+{
+ /* UARTs always present */
+ return 0;
+}
+
+static void rp2_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_RP2;
+}
+
+static int rp2_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2)
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct uart_ops rp2_uart_ops = {
+ .tx_empty = rp2_uart_tx_empty,
+ .set_mctrl = rp2_uart_set_mctrl,
+ .get_mctrl = rp2_uart_get_mctrl,
+ .stop_tx = rp2_uart_stop_tx,
+ .start_tx = rp2_uart_start_tx,
+ .stop_rx = rp2_uart_stop_rx,
+ .enable_ms = rp2_uart_enable_ms,
+ .break_ctl = rp2_uart_break_ctl,
+ .startup = rp2_uart_startup,
+ .shutdown = rp2_uart_shutdown,
+ .set_termios = rp2_uart_set_termios,
+ .type = rp2_uart_type,
+ .release_port = rp2_uart_release_port,
+ .request_port = rp2_uart_request_port,
+ .config_port = rp2_uart_config_port,
+ .verify_port = rp2_uart_verify_port,
+};
+
+static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id)
+{
+ void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
+ u32 clk_cfg;
+
+ writew(1, base + RP2_GLOBAL_CMD);
+ readw(base + RP2_GLOBAL_CMD);
+ msleep(100);
+ writel(0, base + RP2_CLK_PRESCALER);
+
+ /* TDM clock configuration */
+ clk_cfg = readw(base + RP2_ASIC_CFG);
+ clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9);
+ writew(clk_cfg, base + RP2_ASIC_CFG);
+
+ /* IRQ routing */
+ writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK);
+ writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ);
+}
+
+static void rp2_init_card(struct rp2_card *card)
+{
+ writel(4, card->bar0 + RP2_FPGA_CTL0);
+ writel(0, card->bar0 + RP2_FPGA_CTL1);
+
+ rp2_reset_asic(card, 0);
+ if (card->n_ports >= PORTS_PER_ASIC)
+ rp2_reset_asic(card, 1);
+
+ writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK);
+}
+
+static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw)
+{
+ int i;
+
+ writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL);
+ readl(up->base + RP2_UART_CTL);
+ udelay(1);
+
+ writel(0, up->base + RP2_TXRX_CTL);
+ writel(0, up->base + RP2_UART_CTL);
+ readl(up->base + RP2_UART_CTL);
+ udelay(1);
+
+ rp2_flush_fifos(up);
+
+ for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++)
+ writeb(fw->data[i], up->ucode + i);
+
+ __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV);
+ rp2_uart_set_mctrl(&up->port, 0);
+
+ writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO);
+ rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m,
+ RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232);
+ rp2_rmw_set(up, RP2_TXRX_CTL,
+ RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m);
+}
+
+static void rp2_remove_ports(struct rp2_card *card)
+{
+ int i;
+
+ for (i = 0; i < card->initialized_ports; i++)
+ uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port);
+ card->initialized_ports = 0;
+}
+
+static void rp2_fw_cb(const struct firmware *fw, void *context)
+{
+ struct rp2_card *card = context;
+ resource_size_t phys_base;
+ int i, rc = -ENOENT;
+
+ if (!fw) {
+ dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
+ RP2_FW_NAME);
+ goto no_fw;
+ }
+
+ phys_base = pci_resource_start(card->pdev, 1);
+
+ for (i = 0; i < card->n_ports; i++) {
+ struct rp2_uart_port *rp = &card->ports[i];
+ struct uart_port *p;
+ int j = (unsigned)i % PORTS_PER_ASIC;
+
+ rp->asic_base = card->bar1;
+ rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING;
+ rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING;
+ rp->card = card;
+ rp->idx = j;
+
+ p = &rp->port;
+ p->line = card->minor_start + i;
+ p->dev = &card->pdev->dev;
+ p->type = PORT_RP2;
+ p->iotype = UPIO_MEM32;
+ p->uartclk = UART_CLOCK;
+ p->regshift = 2;
+ p->fifosize = FIFO_SIZE;
+ p->ops = &rp2_uart_ops;
+ p->irq = card->pdev->irq;
+ p->membase = rp->base;
+ p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING;
+
+ if (i >= PORTS_PER_ASIC) {
+ rp->asic_base += RP2_ASIC_SPACING;
+ rp->base += RP2_ASIC_SPACING;
+ rp->ucode += RP2_ASIC_SPACING;
+ p->mapbase += RP2_ASIC_SPACING;
+ }
+
+ rp2_init_port(rp, fw);
+ rc = uart_add_one_port(&rp2_uart_driver, p);
+ if (rc) {
+ dev_err(&card->pdev->dev,
+ "error registering port %d: %d\n", i, rc);
+ rp2_remove_ports(card);
+ break;
+ }
+ card->initialized_ports++;
+ }
+
+ release_firmware(fw);
+no_fw:
+ /*
+ * rp2_fw_cb() is called from a workqueue long after rp2_probe()
+ * has already returned success. So if something failed here,
+ * we'll just leave the now-dormant device in place until somebody
+ * unbinds it.
+ */
+ if (rc)
+ dev_warn(&card->pdev->dev, "driver initialization failed\n");
+
+ complete(&card->fw_loaded);
+}
+
+static int rp2_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct rp2_card *card;
+ struct rp2_uart_port *ports;
+ void __iomem * const *bars;
+ int rc;
+
+ card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
+ if (!card)
+ return -ENOMEM;
+ pci_set_drvdata(pdev, card);
+ spin_lock_init(&card->card_lock);
+ init_completion(&card->fw_loaded);
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME);
+ if (rc)
+ return rc;
+
+ bars = pcim_iomap_table(pdev);
+ card->bar0 = bars[0];
+ card->bar1 = bars[1];
+ card->pdev = pdev;
+
+ rp2_decode_cap(id, &card->n_ports, &card->smpte);
+ dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports);
+
+ card->minor_start = rp2_alloc_ports(card->n_ports);
+ if (card->minor_start < 0) {
+ dev_err(&pdev->dev,
+ "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n");
+ return -EINVAL;
+ }
+
+ rp2_init_card(card);
+
+ ports = devm_kzalloc(&pdev->dev, sizeof(*ports) * card->n_ports,
+ GFP_KERNEL);
+ if (!ports)
+ return -ENOMEM;
+ card->ports = ports;
+
+ rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+ IRQF_SHARED, DRV_NAME, card);
+ if (rc)
+ return rc;
+
+ /*
+ * Only catastrophic errors (e.g. ENOMEM) are reported here.
+ * If the FW image is missing, we'll find out in rp2_fw_cb()
+ * and print an error message.
+ */
+ rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
+ GFP_KERNEL, card, rp2_fw_cb);
+ if (rc)
+ return rc;
+ dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
+
+ return 0;
+}
+
+static void rp2_remove(struct pci_dev *pdev)
+{
+ struct rp2_card *card = pci_get_drvdata(pdev);
+
+ wait_for_completion(&card->fw_loaded);
+ rp2_remove_ports(card);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(rp2_pci_tbl) = {
+
+ /* RocketPort INFINITY cards */
+
+ { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */
+ { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */
+ { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */
+ { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */
+ { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */
+ { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */
+ { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */
+ { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */
+ { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */
+ { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */
+ { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */
+ { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */
+ { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */
+ { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */
+ { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */
+ { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */
+ { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */
+
+ /* RocketPort EXPRESS cards */
+
+ { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */
+ { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */
+ { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */
+ { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */
+ { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */
+ { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */
+ { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */
+ { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */
+ { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */
+ { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */
+ { }
+};
+MODULE_DEVICE_TABLE(pci, rp2_pci_tbl);
+
+static struct pci_driver rp2_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = rp2_pci_tbl,
+ .probe = rp2_probe,
+ .remove = rp2_remove,
+};
+
+static int __init rp2_uart_init(void)
+{
+ int rc;
+
+ rc = uart_register_driver(&rp2_uart_driver);
+ if (rc)
+ return rc;
+
+ rc = pci_register_driver(&rp2_pci_driver);
+ if (rc) {
+ uart_unregister_driver(&rp2_uart_driver);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void __exit rp2_uart_exit(void)
+{
+ pci_unregister_driver(&rp2_pci_driver);
+ uart_unregister_driver(&rp2_uart_driver);
+}
+
+module_init(rp2_uart_init);
+module_exit(rp2_uart_exit);
+
+MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver");
+MODULE_AUTHOR("Kevin Cernekee <cernekee@xxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(RP2_FW_NAME);
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 78f99d9..9dd47a5 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -219,4 +219,7 @@
/* ARC (Synopsys) on-chip UART */
#define PORT_ARC 101
+/* Rocketport EXPRESS/INFINITY */
+#define PORT_RP2 102
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
