Re: [PATCH-v2 2/4] target: Drop lun_sep_lock for se_lun->lun_se_dev RCU usage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2015-05-27 at 14:04 -0700, Paul E. McKenney wrote:
> On Tue, May 26, 2015 at 10:29:45PM -0700, Nicholas A. Bellinger wrote:
> > On Tue, 2015-05-26 at 16:30 +0200, Bart Van Assche wrote:
> > > On 05/26/15 08:57, Nicholas A. Bellinger wrote:
> > > > @@ -625,6 +626,7 @@ int core_dev_add_initiator_node_lun_acl(
> > > >   	u32 lun_access)
> > > >   {
> > > >   	struct se_node_acl *nacl = lacl->se_lun_nacl;
> > > > +	struct se_device *dev = lockless_dereference(lun->lun_se_dev);
> > > >   
> > > >   	if (!nacl)
> > > >   		return -EINVAL;
> > > 
> > > An attempt to run this code on a system with RCU debugging enabled
> > > resulted in the following complaint:
> > > 
> > > ===============================
> > > [ INFO: suspicious RCU usage. ]
> > > 4.1.0-rc1-lio-dbg+ #1 Not tainted
> > > -------------------------------
> > > drivers/target/target_core_device.c:617 suspicious rcu_dereference_check() usage!
> > > 
> > > other info that might help us debug this:
> > > 
> > > 
> > > rcu_scheduler_active = 1, debug_locks = 1
> > > 2 locks held by ln/1497:
> > >  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff811d9ca4>] mnt_want_write+0x24/0x50
> > >  #1:  (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<ffffffff811c4cdd>] filename_create+0xad/0x1a0
> > > 
> > > stack backtrace:
> > > CPU: 0 PID: 1497 Comm: ln Not tainted 4.1.0-rc1-lio-dbg+ #1
> > > Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> > >  0000000000000001 ffff88005955bd68 ffffffff814fa346 0000000000000011
> > >  ffff880058bf1270 ffff88005955bd98 ffffffff810ab235 ffff880050db9a68
> > >  ffff880058ae2e68 0000000000000002 ffff880058ae4120 ffff88005955be08
> > > Call Trace:
> > >  [<ffffffff814fa346>] dump_stack+0x4f/0x7b
> > >  [<ffffffff810ab235>] lockdep_rcu_suspicious+0xd5/0x110
> > >  [<ffffffffa04324bc>] core_dev_add_initiator_node_lun_acl+0xec/0x190 [target_core_mod]
> > >  [<ffffffff8108f871>] ? get_parent_ip+0x11/0x50
> > >  [<ffffffffa04346f9>] target_fabric_mappedlun_link+0x129/0x240 [target_core_mod]
> > >  [<ffffffffa043466c>] ? target_fabric_mappedlun_link+0x9c/0x240 [target_core_mod]
> > >  [<ffffffffa035824d>] configfs_symlink+0x13d/0x360 [configfs]
> > >  [<ffffffff811be8c8>] vfs_symlink+0x58/0xb0
> > >  [<ffffffff811c75c5>] SyS_symlink+0x65/0xc0
> > >  [<ffffffff81502eb2>] system_call_fastpath+0x16/0x7a
> > > 
> > 
> > In this particular case, the se_device behind se_lun->lun_se_dev
> > __rcu protected pointer can't be released without first releasing the
> > pre-existing se_lun->lun_group reference to se_device->dev_group.
> > 
> > And since se_lun->lun_group is the source of a configfs symlink to
> > se_lun_acl->se_lun_group here, the se_lun associated RCU pointer and
> > underlying se_device can't be released out from under the above
> > target_fabric_mappedlun_link() code accessing a __rcu protected pointer.
> > 
> > Paul, is lockless_dereference the correct notation for this type of
> > use-case..?
> 
> My guess is "no", but I don't claim to understand your use case.
> 
> The splat is against some other code than the patch, judging by the
> patch line numbers.
> 
> The rule is that if a pointer points to something that is freed (or
> reused) after a grace period, you mark that pointer with __rcu.
> Any access to that pointer must then be accessed in an RCU read-side
> critical section, using one of the RCU list iterators or one of the
> rcu_dereference() macros.  No lockless_dereference() in this case.
> 
> You use lockless_dereference() when something other than RCU controls
> when the pointer target is freed.
> 

For this case, there is a pointer with __rcu notation being
dereferenced, but given the way configfs parent/child config_group
reference counting works, it's impossible for this __rcu pointer to be
modified, and impossible for RCU updater path (-> kfree_rcu) of the
structure being dereferenced to run, while this particular code is
executed.

So I was thinking this should be using something like
rcu_dereference_protected(), but from the comment it sounds like this is
intended only for RCU updater path code.

Is there some other notation to use for this type of case where the RCU
updater path can't run due to external reference counting, or should
this not be using __rcu notation at all..?

Thank you,

--nab

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux