On 01/10/2014 03:41 PM, Mike Christie wrote:
> On 1/10/14 12:11 AM, vaughan wrote:
>> I haven't figure out why it's rejected with "bookmark invalid"(9)
>> reason, rather than "command not supported". IMO "bookmark invalid" is
>> used when minor protocol conflict such as final flag not set with
>> non-write command. However, I haven't find error of this kind in
>> report_opcode, so I guess it's not supported on the target.
>>
>
> Is it possible to get a wireshark/tcpdump trace? It does not have to
> be during boot. We just need to see what commands are sent and the
> response the target is returning.
>
> I forgot we know some microsoft iscsi target people. We can just email
> them with the trace to confirm what is going on with the target. The
> trace seems to be easier for them than them interpreting linux kernel
> logs.
I enabled debug_iscsi_tcp, here is a more detailed log in normal connection.
Does "conn error (1020)" mean it's target peer who disconnect the
connection at the same time of reject report_opcode?
If it is, I think iSCSI boot failure can't be avoided without disable
write_same check on OEL.
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_recv in 52
bytes
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_recv read
0 bytes status 1
Dec 17 00:20:17 ol6u4gx64 kernel: sd 7:0:0:0: [sdc] Write Protect is off
Dec 17 00:20:17 ol6u4gx64 kernel: sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0:
iscsi_sw_tcp_send_hdr_prep digest disabled
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0:
iscsi_sw_tcp_send_hdr_done Header done. Next segment size 0 total_size 0
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_xmit xmit
48 bytes
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_recv in 52
bytes
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_recv read
0 bytes status 1
Dec 17 00:20:17 ol6u4gx64 kernel: sd 7:0:0:0: [sdc] Got wrong page
Dec 17 00:20:17 ol6u4gx64 kernel: sd 7:0:0:0: [sdc] Assuming drive
cache: write through
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0:
iscsi_sw_tcp_send_hdr_prep digest disabled
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0:
iscsi_sw_tcp_send_hdr_done Header done. Next segment size 0 total_size 0
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_xmit xmit
48 bytes
Dec 17 00:20:17 ol6u4gx64 iscsid: Connection4:0 to [target:
iqn.1991-05.com.microsoft:test1, portal: 10.182.92.118,3260] through
[iface: default] is operational now
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_recv in 96
bytes
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: pdu (op 0x1 itt 0xa)
rejected. Reason code 0x9
Dec 17 00:20:17 ol6u4gx64 kernel: rejected iscsi cmd hdr:op 0x1, flags
0xc1, itt 0xa, data_length 512 CDB: a3 c 1 12 0 0 0 0 2 0 0 0 0 0 0 0
Dec 17 00:20:17 ol6u4gx64 kernel: iscsi_handle_reject: return 0
Dec 17 00:20:17 ol6u4gx64 kernel: __iscsi_complete_pdu:1165:
iscsi_handle_reject return 0
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_tcp_recv read
0 bytes status 1
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: iscsi_sw_sk_state_check
TCP_CLOSE|TCP_CLOSE_WAIT
Dec 17 00:20:17 ol6u4gx64 kernel: connection4:0: detected conn error (1020)
Dec 17 00:20:18 ol6u4gx64 iscsid: Kernel reported iSCSI connection 4:0
error (1020 - ISCSI_ERR_TCP_CONN_CLOSE: TCP connection closed) state (3)
"rejected iscsi cmd hdr" line is added for debug as below.
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index d4b4b36..831786a 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -993,7 +993,9 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
{
struct iscsi_reject *reject = (struct iscsi_reject *)hdr;
struct iscsi_hdr rejected_pdu;
+ struct iscsi_scsi_req rejected_scsi_req;
int opcode, rc = 0;
+ int i;
conn->exp_statsn = be32_to_cpu(reject->statsn) + 1;
@@ -1061,6 +1063,22 @@ static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
"pdu (op 0x%x itt 0x%x) rejected. Reason "
"code 0x%x\n", rejected_pdu.opcode,
rejected_pdu.itt, reject->reason);
+ if (reject->reason == ISCSI_REASON_BOOKMARK_INVALID &&
+ rejected_pdu.opcode == ISCSI_OP_SCSI_CMD) {
+ memcpy(&rejected_scsi_req, data, sizeof(struct iscsi_hdr));
+ printk("rejected iscsi cmd hdr:"
+ "op 0x%x, flags 0x%x, itt 0x%x, data_length %u ",
+ rejected_scsi_req.opcode,
+ rejected_scsi_req.flags,
+ rejected_scsi_req.itt,
+ be32_to_cpu(rejected_scsi_req.data_length));
+ printk("CDB:");
+ for (i = 0; i < ISCSI_CDB_SIZE; i++) {
+ printk(" %x", rejected_scsi_req.cdb[i]);
+ }
+ printk("\n");
+ printk("%s: return %d\n", __FUNCTION__, rc);
+ }
break;
}
return rc;
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
