I confirmed the fix for the mpt2sas compilation errors when SCSI_MPT2SAS_LOGGING wasn't set and the patch of the Med Layer Makefile. The mpt2sas driver compiles now without error or warning with or without logging enabled. I have also had a chance to test the driver with a lsi sas 2108 card and the ibm ds3200 sas enclosure. I see no errors on when I insert or remove the driver. I ran block i/o tests for more that 24 hours using disktest without error. Peter On Mon, 2009-03-09 at 01:20 -0600, Eric Moore wrote: > * This is new scsi lld device driver from LSI supporting the SAS 2.0 > standard. I have split patchs by filename. > * Here is list of new 6gb host controllers: > > LSI SAS2004 > LSI SAS2008 > LSI SAS2108 > LSI SAS2116 > > * Here are the changes in the 4th posting of this patch set: > > (1) fix compile errors when SCSI_MPT2SAS_LOGGING is not enabled > (2) add mpt2sas to the SCSI Mid Layer Makefile > (3) append mpt2sas_ to the naming of all non-static functions > (4) fix oops for SMP_PASSTHRU > (5) doorbell algorithm imported changes from windows driver > > * Here are the changes in the 3rd posting of this patch set: > > (1) add readl following writel from the function that disables > interrupts > (2) replace 0xFFFFFFFFFFFFFFFFULL with ~0ULL > (3) when calling pci_enable_msix, only pass one msix entry (instead of > 15). > (4) remove the "current HW implementation uses..... " comment in the > sources > (5) merged bug fix for SIGIO/POLLIN notifcation; reported by the > storlib team. > > * Here are the changes in the 2nd posting of this patch set: > > (1) use little endian types in the mpi headers > (2) merged in bug fix's from inhouse drivers. > > * Here is a summary of the patchs: > > [PATCH 1/12] mpt2sas_base - Common API layer interface to MPT (Message > Passing Technology) firmware. > [PATCH 2/12] mpt2sas_config - Common API for accessing firmware > configuration pages. > [PATCH 3/12] mptsas_ctl - Storage Management Module. > [PATCH 4/12] mpt2sas_scsih - SCSI Host Layer. > [PATCH 5/12] mpt2sas_transport - Common API for accessing the Kernel > SAS Transport Layer. > [PATCH 6/12] mpt2sas_debug - Common Header for debug logging. > [PATCH 7/12] mpi headers - Common MPI (Message Passing Interface) > Headers. > [PATCH 8/12] Kconfig: mpt2sas Kernel configuration file. > [PATCH 9/12] Makefile - mpt2sas driver Makefile. > [PATCH 10/12] scsiml Kconfig - Adding mptsas to the common scsi ml > Kconfig. > [PATCH 11/11] linux/miscdevice.h - Adding suport for > MPT2SAS_MINOR(221) > [PATCH 12/12] scsiml Makefile - add mpt2sas to the SCSI Mid Layer > Makefile > > * diffstat output > > Kconfig | 66 > Makefile | 7 > mpi/mpi2.h | 1067 +++++++++ > mpi/mpi2_cnfg.h | 2151 +++++++++++++++++++ > mpi/mpi2_init.h | 420 +++ > mpi/mpi2_ioc.h | 1295 +++++++++++ > mpi/mpi2_raid.h | 295 ++ > mpi/mpi2_sas.h | 282 ++ > mpi/mpi2_tool.h | 249 ++ > mpi/mpi2_type.h | 61 > mpt2sas_base.c | 3435 +++++++++++++++++++++++++++++++ > mpt2sas_base.h | 779 +++++++ > mpt2sas_config.c | 1873 +++++++++++++++++ > mpt2sas_ctl.c | 2516 +++++++++++++++++++++++ > mpt2sas_ctl.h | 416 +++ > mpt2sas_debug.h | 181 + > mpt2sas_scsih.c | 5687 > ++++++++++++++++++++++++++++++++++++++++++++++++++++ > mpt2sas_transport.c | 1211 +++++++++++ > 18 files changed, 21991 insertions(+) > > Signed-off-by: Eric Moore <eric.moore@xxxxxxx> > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" > in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Peter Bogdanovic IBM System x Enablement -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
