There seems to be some trouble with messages from bugzilla bug #11194 not being sent to the list, so I am reiterating here. I have a Dell PERC3/DCL which is basically an AMI MegaRAID Elite 1600. It uses the megaraid_mbox driver. I am running Debian lenny, but when 2.6.25 hit testing I discovered that lenny won't work with my computer (unless I revert to 2.6.24) because the kernel panics during boot. If I had to reinstall today I'd be screwed because there is no lenny kernel that works with my hardware (.24 is no longer in lenny). Anyway, I thought the panic was occurring during part of the st driver initialization, but, as you will see from the attached logs, it looks like the problem is more basic. It looks like the megaraid_mbox driver is crapping out when and ext3 filesystem is trying to be mounted (on encrypted lvm on the megaraid). I have been able to use a null modem cable and serial console on my firewall/proxy to capture the boot messages from 2.6.26 (which has the same problem as 2.6.25) as megaraid-panic.log and the boot messages from 2.6.24 (which works) as megaraid-good.log. I have attached those logs. Please CC me as I am not subscribed to the list. Also I'd like to know if anyone is working on the megaraid drivers these days, and if the kernel in lenny will have the fix (when it happens). Regards, Daniel -- And that's my crabbing done for the day. Got it out of the way early, now I have the rest of the afternoon to sniff fragrant tea-roses or strangle cute bunnies or something. -- Michael Devore GnuPG Key Fingerprint 86 F5 81 A5 D4 2E 1F 1C http://gnupg.org No more sea shells: Daniel's Weblog http://cshore.wordpress.com
Initializing cgroup subsys cpuset
Linux version 2.6.24-1-686 (Debian 2.6.24-7) (dannf@xxxxxxxxxx) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu May 8 02:16:39 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262140
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262140
DMI 2.3 present.
ACPI: RSDP 000F75E0, 0014 (r0 ASUS )
ACPI: RSDT 3FFFC000, 0030 (r1 ASUS <P4B> 42302E31 MSFT 31313031)
ACPI: FACP 3FFFC100, 0074 (r1 ASUS <P4B> 42302E31 MSFT 31313031)
ACPI: DSDT 3FFFC180, 26E6 (r1 ASUS <P4B> 1000 MSFT 100000B)
ACPI: FACS 3FFFF000, 0040
ACPI: BOOT 3FFFC040, 0028 (r1 ASUS <P4B> 42302E31 MSFT 31313031)
ACPI: APIC 3FFFC080, 005A (r1 ASUS <P4B> 42302E31 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260093
Kernel command line: root=/dev/mapper/Brennin-Root ro rootdelay=10 console=ttyS0 console=tty0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2018.021 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1029440k/1048560k available (1786k kernel code, 18372k reserved, 714k data, 248k init, 131056k highmem)
virtual kernel memory layout:
fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0377000 - 0xc03b5000 ( 248 kB)
.data : 0xc02beaf9 - 0xc0371384 ( 714 kB)
.text : 0xc0100000 - 0xc02beaf9 (1786 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4040.22 BogoMIPS (lpj=8080457)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Total of 1 processors activated (4040.22 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Enabled i801 SMBus device
PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f could not be reserved
system 00:02: ioport range 0xec00-0xec3f has been reserved
system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:0e: ioport range 0x3f0-0x3f1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: df000000-dfcfffff
PREFETCH window: e7f00000-efffffff
PCI: Bridge: 0000:03:00.0
IO window: disabled.
MEM window: de900000-de9fffff
PREFETCH window: dff00000-e7efffff
PCI: Bridge: 0000:02:09.0
IO window: b000-bfff
MEM window: de800000-deffffff
PREFETCH window: dfe00000-e7efffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-bfff
MEM window: de800000-deffffff
PREFETCH window: dfd00000-e7efffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 6245k freed
Simple Boot Flag at 0x3a set to 0x1
audit: initializing netlink socket (disabled)
audit(1218843016.584:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PCI: Enabling device 0000:02:0c.0 (0000 -> 0001)
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 16
0000:02:0c.0: ttyS2 at I/O 0xa400 (irq = 16) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 248k freed
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
PCI: Enabling device 0000:02:0a.0 (0004 -> 0005)
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
3c59x: Donald Becker and others.
0000:02:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001a800.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
qla1280: Skipping AMI SubSys Vendor ID Chip
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 17
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 17, io base 0x00009400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 18
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 18, io base 0x00009000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 4:slot 0:func 0
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller (0x8086:0x244b rev 0x05) at PCI slot 0000:00:1f.1
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:pio, hdd:pio
megaraid: fw version:[199D] bios version:[3.35]
usb 1-1: new full speed USB device using uhci_hcd and address 2
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
hub 1-0:1.0: over-current change on port 2
usb 1-1.2: new full speed USB device using uhci_hcd and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
hda: ASUS DRW-1814BL, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
usb 1-1.3: new full speed USB device using uhci_hcd and address 4
usb 1-1.3: configuration #1 chosen from 1 choice
hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
usb 1-1.4: new full speed USB device using uhci_hcd and address 5
usb 1-1.4: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 0:1:2:0: Processor HP C2520A 3503 PQ: 0 ANSI: 2
scsi 0:1:6:0: Sequential-Access SEAGATE DAT 06408-XXX 8130 PQ: 0 ANSI: 3
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
scsi 0:2:0:0: Direct-Access MegaRAID LD 0 RAID5 210G 199D PQ: 0 ANSI: 2
scsi 0:1:2:0: Attached scsi generic sg0 type 3
scsi 0:1:6:0: Attached scsi generic sg1 type 1
scsi 0:2:0:0: Attached scsi generic sg2 type 0
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232 MB)
sd 0:2:0:0: [sda] Write Protect is off
st: Version 20070203, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
st 0:1:6:0: Attached scsi tape st0
st 0:1:6:0: st0: try direct i/o: yes (alignment 512 B)
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 0:2:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access SD/MMC Card Reader 1.00 PQ: 0 ANSI: 0
sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI removable disk
sd 1:0:0:0: Attached scsi generic sg3 type 0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 124 started
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.102
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected an Intel 845G Chipset.
agpgart: AGP aperture is 128M @ 0xf0000000
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
input: Power Button (FF) as /class/input/input1
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3F17
usbcore: registered new interface driver usblp
input: PC Speaker as /class/input/input3
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
input: ImPS/2 Logitech Wheel Mouse as /class/input/input4
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
gameport: NS558 PnP Gameport is pnp00:10/gameport0, io 0x200, speed 795kHz
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
intel8x0_measure_ac97_clock: measured 54994 usecs
intel8x0: clocking to 48000
no PnP irq, using polling
st0: Block limits 1 - 16777215 bytes.
EXT3 FS on dm-1, internal journal
loop: module loaded
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
KQEMU installed, max_locked_mem=518152kB.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
fuse init (API version 7.9)
aufs 20080128
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/Brennin-Swap. Priority:-1 extents:1 across:1048568k
device tap0 entered promiscuous mode
audit(1218843537.458:2): dev=tap0 prom=256 old_prom=0 auid=4294967295
device tap1 entered promiscuous mode
audit(1218843537.580:3): dev=tap1 prom=256 old_prom=0 auid=4294967295
Bridge firewalling registered
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
br0: port 2(tap1) entering learning state
br0: port 1(tap0) entering learning state
br0: topology change detected, propagating
br0: port 2(tap1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(tap0) entering forwarding state
eth0: setting full-duplex.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 2 usecs
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-1snapshot.11925) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+2)) #1 SMP Thu Jul 31 01:18:34 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fffc000 (usable) [ 0.000000] BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262140 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262140 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 ASUS ) [ 0.000000] ACPI: RSDT 3FFFC000, 0030 (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: FACP 3FFFC100, 0074 (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: DSDT 3FFFC180, 26E6 (r1 ASUS <P4B> 1000 MSFT 100000B) [ 0.000000] ACPI: FACS 3FFFF000, 0040 [ 0.000000] ACPI: BOOT 3FFFC040, 0028 (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: APIC 3FFFC080, 005A (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260092 [ 0.000000] Kernel command line: root=/dev/mapper/Brennin-Root ro rootdelay=10 console=ttyS0 console=tty0 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2018.014 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1029040k/1048560k available (1758k kernel code, 18820k reserved, 743k data, 244k init, 131056k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc0379000 - 0xc03b6000 ( 244 kB) [ 0.004000] .data : 0xc02b79db - 0xc0371620 ( 743 kB) [ 0.004000] .text : 0xc0100000 - 0xc02b79db (1758 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.084216] Calibrating delay using timer specific routine.. 4041.34 BogoMIPS (lpj=8082686) [ 0.096006] Security Framework initialized [ 0.100006] SELinux: Disabled at boot. [ 0.104006] Capability LSM initialized [ 0.108006] Mount-cache hash table entries: 512 [ 0.112007] Initializing cgroup subsys ns [ 0.116007] Initializing cgroup subsys cpuacct [ 0.120021] Initializing cgroup subsys devices [ 0.128008] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.136008] CPU: L2 cache: 512K [ 0.140008] CPU: Hyper-Threading is disabled [ 0.144009] Intel machine check architecture supported. [ 0.148009] Intel machine check reporting enabled on CPU#0. [ 0.152009] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.156009] CPU0: Thermal monitoring enabled [ 0.160010] Checking 'hlt' instruction... OK. [ 0.182583] SMP alternatives: switching to UP code [ 0.199966] Freeing SMP alternatives: 16k freed [ 0.204012] ACPI: Core revision 20080321 [ 0.212013] ENABLING IO-APIC IRQs [ 0.216013] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.259716] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 [ 0.272017] Brought up 1 CPUs [ 0.276017] Total of 1 processors activated (4041.34 BogoMIPS). [ 0.280017] net_namespace: 660 bytes [ 0.284017] Booting paravirtualized kernel on bare hardware [ 0.288018] NET: Registered protocol family 16 [ 0.292018] ACPI: bus type pci registered [ 0.298210] PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=4 [ 0.304019] PCI: Using configuration type 1 for base access [ 0.308019] Setting up standard PCI resources [ 0.326670] ACPI: Interpreter enabled [ 0.332020] ACPI: (supports S0 S1 S4 S5) [ 0.347349] ACPI: Using IOAPIC for interrupt routing [ 0.361598] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.368023] pci 0000:00:1f.0: Enabled i801 SMBus device [ 0.372023] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO [ 0.376023] pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO [ 0.380023] PCI: Transparent bridge - 0000:00:1e.0 [ 0.386287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.424026] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.461660] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.510467] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.550340] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.598465] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.639038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.676031] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.713786] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.720031] pnp: PnP ACPI init [ 0.724031] ACPI: bus type pnp registered [ 0.734942] pnp: PnP ACPI: found 17 devices [ 0.740031] ACPI: ACPI bus type pnp unregistered [ 0.744031] PnPBIOS: Disabled by ACPI PNP [ 0.748032] PCI: Using ACPI for IRQ routing [ 0.752031] ACPI: RTC can wake from S4 [ 0.756034] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.831266] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.914659] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 1.002214] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved [ 1.091840] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved [ 1.181481] system 00:02: ioport range 0xe400-0xe47f has been reserved [ 1.259665] system 00:02: ioport range 0xe800-0xe81f could not be reserved [ 1.342016] system 00:02: ioport range 0xec00-0xec3f has been reserved [ 1.420216] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved [ 1.509841] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved [ 1.595319] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 1.671440] system 00:0e: ioport range 0x3f0-0x3f1 has been reserved [ 1.780153] PCI: Bridge: 0000:00:01.0 [ 1.821991] IO window: d000-dfff [ 1.862753] MEM window: 0xdf000000-0xdfcfffff [ 1.917029] PREFETCH window: 0x00000000e7f00000-0x00000000efffffff [ 1.993150] PCI: Bridge: 0000:03:00.0 [ 2.037021] IO window: disabled. [ 2.077787] MEM window: 0xde900000-0xde9fffff [ 2.132061] PREFETCH window: 0x00000000dff00000-0x00000000e7efffff [ 2.208178] PCI: Bridge: 0000:02:09.0 [ 2.252054] IO window: b000-bfff [ 2.292815] MEM window: 0xde800000-0xdeffffff [ 2.347093] PREFETCH window: 0x00000000dfe00000-0x00000000e7efffff [ 2.423209] PCI: Bridge: 0000:00:1e.0 [ 2.467084] IO window: a000-bfff [ 2.507847] MEM window: 0xde800000-0xdeffffff [ 2.562125] PREFETCH window: 0x00000000dfd00000-0x00000000e7efffff [ 2.638324] NET: Registered protocol family 2 [ 2.690698] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2.780148] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.867614] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 2.950969] TCP: Hash tables configured (established 131072 bind 65536) [ 3.027554] TCP reno registered [ 3.065505] NET: Registered protocol family 1 [ 3.117934] checking if image is initramfs... it is [ 5.804283] Freeing initrd memory: 6551k freed [ 5.804283] Simple Boot Flag at 0x3a set to 0x1 [ 5.804283] audit: initializing netlink socket (disabled) [ 5.804283] type=2000 audit(1218842748.193:1): initialized [ 5.804283] highmem bounce pool size: 64 pages [ 5.804283] Total HugeTLB memory allocated, 0 [ 5.804283] VFS: Disk quotas dquot_6.5.1 [ 5.804283] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.804283] msgmni has been set to 1767 [ 5.804283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 5.804283] io scheduler noop registered [ 5.804283] io scheduler anticipatory registered [ 5.804283] io scheduler deadline registered [ 5.804283] io scheduler cfq registered (default) [ 5.804283] isapnp: Scanning for PnP cards... [ 5.804283] isapnp: No Plug & Play device found [ 5.804284] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 5.804284] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.804284] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.804284] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.804284] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.804284] serial 0000:02:0c.0: enabling device (0000 -> 0001) [ 5.804284] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 5.835979] 0000:02:0c.0: ttyS2 at I/O 0xa400 (irq = 20) is a 16550A [ 5.912209] brd: module loaded [ 5.948386] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 6.042416] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.101811] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.162531] mice: PS/2 mouse device common for all mice [ 6.224743] cpuidle: using governor ladder [ 6.275485] cpuidle: using governor menu [ 6.320577] No iBFT detected. [ 6.356754] TCP cubic registered [ 6.395368] NET: Registered protocol family 17 [ 6.448565] Using IPI No-Shortcut mode [ 6.495897] registered taskstats version 1 [ 6.545309] Freeing unused kernel memory: 244k freed [ 6.755503] ACPI: ACPI0007:00 is registered as cooling_device0 [ 7.806895] 3c59x 0000:02:0a.0: enabling device (0004 -> 0005) [ 7.876813] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 7.965565] 3c59x: Donald Becker and others. [ 8.017577] 0000:02:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001a800. [ 8.252540] SCSI subsystem initialized [ 8.299364] No dock devices found. [ 8.364258] usbcore: registered new interface driver usbfs [ 8.429991] usbcore: registered new interface driver hub [ 8.495096] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 8.768116] Uniform Multi-Platform E-IDE driver [ 8.822376] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 8.923235] qla1280: Skipping AMI SubSys Vendor ID Chip [ 9.014238] Floppy drive(s): fd0 is 1.44M [ 9.085637] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 9.168977] megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 4:slot 0:func 0 [ 9.266901] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 9.406356] FDC 0 is a post-1991 82077 [ 9.451342] usbcore: registered new device driver usb [ 9.519749] USB Universal Host Controller Interface driver v3.0 [ 9.590693] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19 [ 9.679490] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 9.743702] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 9.832238] uhci_hcd 0000:00:1f.2: irq 19, io base 0x00009400 [ 9.901123] usb usb1: configuration #1 chosen from 1 choice [ 9.967820] hub 1-0:1.0: USB hub found [ 10.012669] hub 1-0:1.0: 2 ports detected [ 10.084118] megaraid: fw version:[199D] bios version:[3.35] [ 10.162282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.243624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.331378] usb usb1: Product: UHCI Host Controller [ 10.389878] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 10.460315] usb usb1: SerialNumber: 0000:00:1f.2 [ 10.519427] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23 [ 10.608185] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 10.670794] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 10.759371] uhci_hcd 0000:00:1f.4: irq 23, io base 0x00009000 [ 10.828250] usb usb2: configuration #1 chosen from 1 choice [ 10.894954] hub 2-0:1.0: USB hub found [ 10.939798] hub 2-0:1.0: 2 ports detected [ 11.000525] scsi0 : LSI Logic MegaRAID driver [ 11.073602] scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices [ 11.159931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.240086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.326613] usb usb2: Product: UHCI Host Controller [ 11.384956] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 11.455806] usb usb2: SerialNumber: 0000:00:1f.4 [ 11.515048] ICH2: IDE controller (0x8086:0x244b rev 0x05) at PCI slot 0000:00:1f.1 [ 11.606853] ICH2: not 100% native mode: will probe irqs later [ 11.675617] ide0: BM-DMA at 0x9800-0x9807 [ 11.727765] ide1: BM-DMA at 0x9808-0x980f [ 11.840089] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 12.167295] usb 1-1: configuration #1 chosen from 1 choice [ 12.248446] hub 1-1:1.0: USB hub found [ 12.314106] hub 1-1:1.0: 5 ports detected [ 12.576193] usb 1-1: New USB device found, idVendor=049f, idProduct=f511 [ 12.656441] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.741911] hub 1-0:1.0: over-current change on port 2 [ 12.916178] hda: ASUS DRW-1814BL, ATAPI CD/DVD-ROM drive [ 13.280500] usb 1-1.2: new full speed USB device using uhci_hcd and address 3 [ 13.512003] usb 1-1.2: configuration #1 chosen from 1 choice [ 13.615209] usb 1-1.2: New USB device found, idVendor=058f, idProduct=6335 [ 13.697595] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.785286] usb 1-1.2: Product: Mass Storage Device [ 13.843686] usb 1-1.2: Manufacturer: Generic [ 13.895367] usb 1-1.2: SerialNumber: 058F011111B1 [ 13.974328] Initializing USB Mass Storage driver... [ 14.084214] hda: UDMA/66 mode selected [ 14.384896] usb 1-1.3: new full speed USB device using uhci_hcd and address 4 [ 14.645846] usb 1-1.3: configuration #1 chosen from 1 choice [ 14.732596] usb 1-1.3: New USB device found, idVendor=04b8, idProduct=0005 [ 14.814946] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 14.902797] usb 1-1.3: Product: USB Printer [ 14.954303] usb 1-1.3: Manufacturer: EPSON [ 15.003389] usb 1-1.3: SerialNumber: W60100203082324090 [ 15.066832] scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices [ 15.148410] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 15.203088] ide1 at 0x170-0x177,0x376 on irq 15 [ 15.344295] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 15.427378] Uniform CD-ROM driver Revision: 3.20 [ 15.716642] usb 1-1.4: new full speed USB device using uhci_hcd and address 5 [ 15.806142] scsi 0:1:2:0: Processor HP C2520A 3503 PQ: 0 ANSI: 2 [ 16.040003] usb 1-1.4: configuration #1 chosen from 1 choice [ 16.171780] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=3f17 [ 16.254167] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.342183] usb 1-1.4: Product: HP LaserJet P1505 [ 16.398476] usb 1-1.4: Manufacturer: Hewlett-Packard [ 16.458103] usb 1-1.4: SerialNumber: CA3396E [ 16.552716] scsi1 : SCSI emulation for USB Mass Storage devices [ 16.627737] usbcore: registered new interface driver usb-storage [ 16.699605] USB Mass Storage support registered. [ 16.772087] scsi 0:1:6:0: Sequential-Access SEAGATE DAT 06408-XXX 8130 PQ: 0 ANSI: 3 [ 17.980012] scsi[0]: scanning scsi channel 2 [virtual] for logical drives [ 18.986594] scsi 0:2:0:0: Direct-Access MegaRAID LD 0 RAID5 210G 199D PQ: 0 ANSI: 2 [ 19.168224] osst :I: Tape driver with OnStream support version 0.99.4 [ 19.168228] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 19.325709] Driver 'osst' needs updating - please use bus_type methods [ 19.408003] scsi 0:1:2:0: Attached scsi generic sg0 type 3 [ 19.473745] scsi 0:1:6:0: Attached scsi generic sg1 type 1 [ 19.539381] scsi 0:2:0:0: Attached scsi generic sg2 type 0 [ 19.628121] Driver 'sd' needs updating - please use bus_type methods [ 19.710133] sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232 MB) [ 19.814040] st: Version 20080224, fixed bufsize 32768, s/g segs 256 [ 19.889138] Driver 'st' needs updating - please use bus_type methods [ 19.965493] st 0:1:6:0: Attached scsi tape st0 [ 20.018721] st 0:1:6:0: st0: try direct i/o: yes (alignment 4 B) [ 20.094015] sd 0:2:0:0: [sda] Write Protect is off [ 20.153455] sd 0:2:0:0: [sda] Asking for cache data failed [ 20.219155] sd 0:2:0:0: [sda] Assuming drive cache: write through [ 20.294981] sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232 MB) [ 20.380048] sd 0:2:0:0: [sda] Write Protect is off [ 20.437396] sd 0:2:0:0: [sda] Asking for cache data failed [ 20.503524] sd 0:2:0:0: [sda] Assuming drive cache: write through [ 20.576451] sda: sda1 sda2 [ 20.611220] sd 0:2:0:0: [sda] Attached SCSI disk [ 21.756509] scsi 1:0:0:0: Direct-Access SD/MMC Card Reader 1.00 PQ: 0 ANSI: 0 [ 22.312350] sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB) [ 22.406709] sd 1:0:0:0: [sdb] Write Protect is off [ 22.464801] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 22.543750] sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB) [ 22.636717] sd 1:0:0:0: [sdb] Write Protect is off [ 22.694807] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 22.767797] sdb: sdb1 [ 22.805837] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 22.869978] sd 1:0:0:0: Attached scsi generic sg3 type 0 [ 26.953605] device-mapper: uevent: version 1.0.3 [ 27.011523] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx [ 61.511864] PM: Starting manual resume from disk [ 61.612817] kjournald starting. Commit interval 5 seconds [ 61.678603] EXT3-fs: mounted filesystem with ordered data mode. [ 63.941095] udevd version 124 started [ 64.844301] st0: Block limits 1 - 16777215 bytes. [ 64.912023] BUG: unable to handle kernel NULL pointer dereference at 00000be0 [ 64.999065] IP: [<f8857209>] :megaraid_mbox:megaraid_mbox_dpc+0x178/0x44a [ 65.080515] *pde = 00000000 [ 65.115797] Oops: 0000 [#1] SMP [ 65.118076] Modules linked in: joydev evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod st sd_mod sg osst ide_cd_mod cdrom ide_pci_generic usb_storage piix uhci_hcd megaraid_mbox floppy qla1280 ide_core ata_generic libata megaraid_mm usbcore dock scsi_mod 3c59x mii thermal processor fan thermal_sys [ 65.118076] [ 65.118076] Pid: 1447, comm: udevd Not tainted (2.6.26-1-686 #1) [ 65.118076] EIP: 0060:[<f8857209>] EFLAGS: 00010282 CPU: 0 [ 65.118076] EIP is at megaraid_mbox_dpc+0x178/0x44a [megaraid_mbox] [ 65.118076] EAX: 00000000 EBX: f7804680 ECX: c0405bd8 EDX: 00000be0 [ 65.118076] ESI: 00000000 EDI: 00000000 EBP: f7460108 ESP: f7b11df4 [ 65.118076] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 65.118076] Process udevd (pid: 1447, ti=f7b10000 task=f74b6ca0 task.ti=f7b10000) [ 65.118076] Stack: f77c995e f7458000 f746c000 f7b11e10 f77f9880 f78a3300 f78a3300 f746010c [ 65.118076] f746010c f746010c f7458000 00000000 0000000a 00000000 c012689b 00000001 [ 65.118076] c0369a68 c012644d 00000046 c036a400 00000000 00000015 c01264ff 000007e0 [ 65.118076] Call Trace: [ 65.118076] [<c012689b>] tasklet_action+0x68/0xd0 [ 65.118076] [<c012644d>] __do_softirq+0x66/0xd3 [ 65.118076] [<c01264ff>] do_softirq+0x45/0x53 [ 65.118076] [<c01267b6>] irq_exit+0x35/0x67 [ 65.118076] [<c0105f53>] do_IRQ+0x52/0x63 [ 65.118076] [<c01042b7>] common_interrupt+0x23/0x28 [ 65.118076] [<c0162083>] do_wp_page+0x28a/0x49f [ 65.118076] [<c0163feb>] handle_mm_fault+0x623/0x690 [ 65.118076] [<c017cd53>] sys_mkdirat+0xca/0xd4 [ 65.118076] [<c0115b07>] do_page_fault+0x29b/0x5b8 [ 65.118076] [<c0172a15>] filp_close+0x4d/0x53 [ 65.118076] [<c011586c>] do_page_fault+0x0/0x5b8 [ 65.118076] [<c02b6d3a>] error_code+0x72/0x78 [ 65.118076] [<c02b0000>] cacheinfo_cpu_callback+0x4f/0xa6 [ 65.118076] ======================= [ 65.118076] Code: 0f b7 4d 24 0f b6 82 c4 33 00 00 d3 f8 a8 01 0f 84 83 00 00 00 8b 4c 24 10 8b 59 68 8b 03 83 e0 fc 74 10 e8 fb 9f 90 c7 8b 53 04 <f6> 04 10 1f 74 1c eb 65 83 3d 00 b5 85 f8 00 78 11 68 1d 09 00 [ 65.118076] EIP: [<f8857209>] megaraid_mbox_dpc+0x178/0x44a [megaraid_mbox] SS:ESP 0068:f7b11df4 [ 67.602238] Kernel panic - not syncing: Fatal exception in interrupt
Attachment:
signature.asc
Description: PGP signature
