http://bugzilla.kernel.org/show_bug.cgi?id=11194 ------- Comment #4 from cshore@xxxxxxxxxxx 2008-08-15 16:46 ------- A capture of the boot log using a serial console [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-1snapshot.11925) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+2)) #1 SMP Thu Jul 31 01:18:34 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fffc000 (usable) [ 0.000000] BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262140 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262140 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 ASUS ) [ 0.000000] ACPI: RSDT 3FFFC000, 0030 (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: FACP 3FFFC100, 0074 (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: DSDT 3FFFC180, 26E6 (r1 ASUS <P4B> 1000 MSFT 100000B) [ 0.000000] ACPI: FACS 3FFFF000, 0040 [ 0.000000] ACPI: BOOT 3FFFC040, 0028 (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: APIC 3FFFC080, 005A (r1 ASUS <P4B> 42302E31 MSFT 31313031) [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level) [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260092 [ 0.000000] Kernel command line: root=/dev/mapper/Brennin-Root ro rootdelay=10 console=ttyS0 console=tty0 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2018.014 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1029040k/1048560k available (1758k kernel code, 18820k reserved, 743k data, 244k init, 131056k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc0379000 - 0xc03b6000 ( 244 kB) [ 0.004000] .data : 0xc02b79db - 0xc0371620 ( 743 kB) [ 0.004000] .text : 0xc0100000 - 0xc02b79db (1758 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.084216] Calibrating delay using timer specific routine.. 4041.34 BogoMIPS (lpj=8082686) [ 0.096006] Security Framework initialized [ 0.100006] SELinux: Disabled at boot. [ 0.104006] Capability LSM initialized [ 0.108006] Mount-cache hash table entries: 512 [ 0.112007] Initializing cgroup subsys ns [ 0.116007] Initializing cgroup subsys cpuacct [ 0.120021] Initializing cgroup subsys devices [ 0.128008] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.136008] CPU: L2 cache: 512K [ 0.140008] CPU: Hyper-Threading is disabled [ 0.144009] Intel machine check architecture supported. [ 0.148009] Intel machine check reporting enabled on CPU#0. [ 0.152009] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.156009] CPU0: Thermal monitoring enabled [ 0.160010] Checking 'hlt' instruction... OK. [ 0.182583] SMP alternatives: switching to UP code [ 0.199966] Freeing SMP alternatives: 16k freed [ 0.204012] ACPI: Core revision 20080321 [ 0.212013] ENABLING IO-APIC IRQs [ 0.216013] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.259716] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 [ 0.272017] Brought up 1 CPUs [ 0.276017] Total of 1 processors activated (4041.34 BogoMIPS). [ 0.280017] net_namespace: 660 bytes [ 0.284017] Booting paravirtualized kernel on bare hardware [ 0.288018] NET: Registered protocol family 16 [ 0.292018] ACPI: bus type pci registered [ 0.298210] PCI: PCI BIOS revision 2.10 entry at 0xf11f0, last bus=4 [ 0.304019] PCI: Using configuration type 1 for base access [ 0.308019] Setting up standard PCI resources [ 0.326670] ACPI: Interpreter enabled [ 0.332020] ACPI: (supports S0 S1 S4 S5) [ 0.347349] ACPI: Using IOAPIC for interrupt routing [ 0.361598] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.368023] pci 0000:00:1f.0: Enabled i801 SMBus device [ 0.372023] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO [ 0.376023] pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO [ 0.380023] PCI: Transparent bridge - 0000:00:1e.0 [ 0.386287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.424026] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.461660] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.510467] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.550340] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.598465] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.639038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.676031] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.713786] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.720031] pnp: PnP ACPI init [ 0.724031] ACPI: bus type pnp registered [ 0.734942] pnp: PnP ACPI: found 17 devices [ 0.740031] ACPI: ACPI bus type pnp unregistered [ 0.744031] PnPBIOS: Disabled by ACPI PNP [ 0.748032] PCI: Using ACPI for IRQ routing [ 0.752031] ACPI: RTC can wake from S4 [ 0.756034] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.831266] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.914659] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 1.002214] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved [ 1.091840] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved [ 1.181481] system 00:02: ioport range 0xe400-0xe47f has been reserved [ 1.259665] system 00:02: ioport range 0xe800-0xe81f could not be reserved [ 1.342016] system 00:02: ioport range 0xec00-0xec3f has been reserved [ 1.420216] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved [ 1.509841] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved [ 1.595319] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 1.671440] system 00:0e: ioport range 0x3f0-0x3f1 has been reserved [ 1.780153] PCI: Bridge: 0000:00:01.0 [ 1.821991] IO window: d000-dfff [ 1.862753] MEM window: 0xdf000000-0xdfcfffff [ 1.917029] PREFETCH window: 0x00000000e7f00000-0x00000000efffffff [ 1.993150] PCI: Bridge: 0000:03:00.0 [ 2.037021] IO window: disabled. [ 2.077787] MEM window: 0xde900000-0xde9fffff [ 2.132061] PREFETCH window: 0x00000000dff00000-0x00000000e7efffff [ 2.208178] PCI: Bridge: 0000:02:09.0 [ 2.252054] IO window: b000-bfff [ 2.292815] MEM window: 0xde800000-0xdeffffff [ 2.347093] PREFETCH window: 0x00000000dfe00000-0x00000000e7efffff [ 2.423209] PCI: Bridge: 0000:00:1e.0 [ 2.467084] IO window: a000-bfff [ 2.507847] MEM window: 0xde800000-0xdeffffff [ 2.562125] PREFETCH window: 0x00000000dfd00000-0x00000000e7efffff [ 2.638324] NET: Registered protocol family 2 [ 2.690698] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2.780148] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.867614] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 2.950969] TCP: Hash tables configured (established 131072 bind 65536) [ 3.027554] TCP reno registered [ 3.065505] NET: Registered protocol family 1 [ 3.117934] checking if image is initramfs... it is [ 5.804283] Freeing initrd memory: 6551k freed [ 5.804283] Simple Boot Flag at 0x3a set to 0x1 [ 5.804283] audit: initializing netlink socket (disabled) [ 5.804283] type=2000 audit(1218842748.193:1): initialized [ 5.804283] highmem bounce pool size: 64 pages [ 5.804283] Total HugeTLB memory allocated, 0 [ 5.804283] VFS: Disk quotas dquot_6.5.1 [ 5.804283] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.804283] msgmni has been set to 1767 [ 5.804283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 5.804283] io scheduler noop registered [ 5.804283] io scheduler anticipatory registered [ 5.804283] io scheduler deadline registered [ 5.804283] io scheduler cfq registered (default) [ 5.804283] isapnp: Scanning for PnP cards... [ 5.804283] isapnp: No Plug & Play device found [ 5.804284] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 5.804284] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.804284] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.804284] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.804284] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.804284] serial 0000:02:0c.0: enabling device (0000 -> 0001) [ 5.804284] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 5.835979] 0000:02:0c.0: ttyS2 at I/O 0xa400 (irq = 20) is a 16550A [ 5.912209] brd: module loaded [ 5.948386] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 6.042416] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.101811] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.162531] mice: PS/2 mouse device common for all mice [ 6.224743] cpuidle: using governor ladder [ 6.275485] cpuidle: using governor menu [ 6.320577] No iBFT detected. [ 6.356754] TCP cubic registered [ 6.395368] NET: Registered protocol family 17 [ 6.448565] Using IPI No-Shortcut mode [ 6.495897] registered taskstats version 1 [ 6.545309] Freeing unused kernel memory: 244k freed [ 6.755503] ACPI: ACPI0007:00 is registered as cooling_device0 [ 7.806895] 3c59x 0000:02:0a.0: enabling device (0004 -> 0005) [ 7.876813] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 7.965565] 3c59x: Donald Becker and others. [ 8.017577] 0000:02:0a.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001a800. [ 8.252540] SCSI subsystem initialized [ 8.299364] No dock devices found. [ 8.364258] usbcore: registered new interface driver usbfs [ 8.429991] usbcore: registered new interface driver hub [ 8.495096] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 8.768116] Uniform Multi-Platform E-IDE driver [ 8.822376] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 8.923235] qla1280: Skipping AMI SubSys Vendor ID Chip [ 9.014238] Floppy drive(s): fd0 is 1.44M [ 9.085637] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 9.168977] megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 4:slot 0:func 0 [ 9.266901] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 9.406356] FDC 0 is a post-1991 82077 [ 9.451342] usbcore: registered new device driver usb [ 9.519749] USB Universal Host Controller Interface driver v3.0 [ 9.590693] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19 [ 9.679490] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 9.743702] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 9.832238] uhci_hcd 0000:00:1f.2: irq 19, io base 0x00009400 [ 9.901123] usb usb1: configuration #1 chosen from 1 choice [ 9.967820] hub 1-0:1.0: USB hub found [ 10.012669] hub 1-0:1.0: 2 ports detected [ 10.084118] megaraid: fw version:[199D] bios version:[3.35] [ 10.162282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 10.243624] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.331378] usb usb1: Product: UHCI Host Controller [ 10.389878] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 10.460315] usb usb1: SerialNumber: 0000:00:1f.2 [ 10.519427] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23 [ 10.608185] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 10.670794] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 10.759371] uhci_hcd 0000:00:1f.4: irq 23, io base 0x00009000 [ 10.828250] usb usb2: configuration #1 chosen from 1 choice [ 10.894954] hub 2-0:1.0: USB hub found [ 10.939798] hub 2-0:1.0: 2 ports detected [ 11.000525] scsi0 : LSI Logic MegaRAID driver [ 11.073602] scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices [ 11.159931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 11.240086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.326613] usb usb2: Product: UHCI Host Controller [ 11.384956] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 11.455806] usb usb2: SerialNumber: 0000:00:1f.4 [ 11.515048] ICH2: IDE controller (0x8086:0x244b rev 0x05) at PCI slot 0000:00:1f.1 [ 11.606853] ICH2: not 100% native mode: will probe irqs later [ 11.675617] ide0: BM-DMA at 0x9800-0x9807 [ 11.727765] ide1: BM-DMA at 0x9808-0x980f [ 11.840089] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 12.167295] usb 1-1: configuration #1 chosen from 1 choice [ 12.248446] hub 1-1:1.0: USB hub found [ 12.314106] hub 1-1:1.0: 5 ports detected [ 12.576193] usb 1-1: New USB device found, idVendor=049f, idProduct=f511 [ 12.656441] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.741911] hub 1-0:1.0: over-current change on port 2 [ 12.916178] hda: ASUS DRW-1814BL, ATAPI CD/DVD-ROM drive [ 13.280500] usb 1-1.2: new full speed USB device using uhci_hcd and address 3 [ 13.512003] usb 1-1.2: configuration #1 chosen from 1 choice [ 13.615209] usb 1-1.2: New USB device found, idVendor=058f, idProduct=6335 [ 13.697595] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 13.785286] usb 1-1.2: Product: Mass Storage Device [ 13.843686] usb 1-1.2: Manufacturer: Generic [ 13.895367] usb 1-1.2: SerialNumber: 058F011111B1 [ 13.974328] Initializing USB Mass Storage driver... [ 14.084214] hda: UDMA/66 mode selected [ 14.384896] usb 1-1.3: new full speed USB device using uhci_hcd and address 4 [ 14.645846] usb 1-1.3: configuration #1 chosen from 1 choice [ 14.732596] usb 1-1.3: New USB device found, idVendor=04b8, idProduct=0005 [ 14.814946] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 14.902797] usb 1-1.3: Product: USB Printer [ 14.954303] usb 1-1.3: Manufacturer: EPSON [ 15.003389] usb 1-1.3: SerialNumber: W60100203082324090 [ 15.066832] scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices [ 15.148410] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 15.203088] ide1 at 0x170-0x177,0x376 on irq 15 [ 15.344295] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 15.427378] Uniform CD-ROM driver Revision: 3.20 [ 15.716642] usb 1-1.4: new full speed USB device using uhci_hcd and address 5 [ 15.806142] scsi 0:1:2:0: Processor HP C2520A 3503 PQ: 0 ANSI: 2 [ 16.040003] usb 1-1.4: configuration #1 chosen from 1 choice [ 16.171780] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=3f17 [ 16.254167] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.342183] usb 1-1.4: Product: HP LaserJet P1505 [ 16.398476] usb 1-1.4: Manufacturer: Hewlett-Packard [ 16.458103] usb 1-1.4: SerialNumber: CA3396E [ 16.552716] scsi1 : SCSI emulation for USB Mass Storage devices [ 16.627737] usbcore: registered new interface driver usb-storage [ 16.699605] USB Mass Storage support registered. [ 16.772087] scsi 0:1:6:0: Sequential-Access SEAGATE DAT 06408-XXX 8130 PQ: 0 ANSI: 3 [ 17.980012] scsi[0]: scanning scsi channel 2 [virtual] for logical drives [ 18.986594] scsi 0:2:0:0: Direct-Access MegaRAID LD 0 RAID5 210G 199D PQ: 0 ANSI: 2 [ 19.168224] osst :I: Tape driver with OnStream support version 0.99.4 [ 19.168228] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 19.325709] Driver 'osst' needs updating - please use bus_type methods [ 19.408003] scsi 0:1:2:0: Attached scsi generic sg0 type 3 [ 19.473745] scsi 0:1:6:0: Attached scsi generic sg1 type 1 [ 19.539381] scsi 0:2:0:0: Attached scsi generic sg2 type 0 [ 19.628121] Driver 'sd' needs updating - please use bus_type methods [ 19.710133] sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232 MB) [ 19.814040] st: Version 20080224, fixed bufsize 32768, s/g segs 256 [ 19.889138] Driver 'st' needs updating - please use bus_type methods [ 19.965493] st 0:1:6:0: Attached scsi tape st0 [ 20.018721] st 0:1:6:0: st0: try direct i/o: yes (alignment 4 B) [ 20.094015] sd 0:2:0:0: [sda] Write Protect is off [ 20.153455] sd 0:2:0:0: [sda] Asking for cache data failed [ 20.219155] sd 0:2:0:0: [sda] Assuming drive cache: write through [ 20.294981] sd 0:2:0:0: [sda] 430141440 512-byte hardware sectors (220232 MB) [ 20.380048] sd 0:2:0:0: [sda] Write Protect is off [ 20.437396] sd 0:2:0:0: [sda] Asking for cache data failed [ 20.503524] sd 0:2:0:0: [sda] Assuming drive cache: write through [ 20.576451] sda: sda1 sda2 [ 20.611220] sd 0:2:0:0: [sda] Attached SCSI disk [ 21.756509] scsi 1:0:0:0: Direct-Access SD/MMC Card Reader 1.00 PQ: 0 ANSI: 0 [ 22.312350] sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB) [ 22.406709] sd 1:0:0:0: [sdb] Write Protect is off [ 22.464801] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 22.543750] sd 1:0:0:0: [sdb] 7870464 512-byte hardware sectors (4030 MB) [ 22.636717] sd 1:0:0:0: [sdb] Write Protect is off [ 22.694807] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 22.767797] sdb: sdb1 [ 22.805837] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 22.869978] sd 1:0:0:0: Attached scsi generic sg3 type 0 [ 26.953605] device-mapper: uevent: version 1.0.3 [ 27.011523] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx [ 61.511864] PM: Starting manual resume from disk [ 61.612817] kjournald starting. Commit interval 5 seconds [ 61.678603] EXT3-fs: mounted filesystem with ordered data mode. [ 63.941095] udevd version 124 started [ 64.844301] st0: Block limits 1 - 16777215 bytes. [ 64.912023] BUG: unable to handle kernel NULL pointer dereference at 00000be0 [ 64.999065] IP: [<f8857209>] :megaraid_mbox:megaraid_mbox_dpc+0x178/0x44a [ 65.080515] *pde = 00000000 [ 65.115797] Oops: 0000 [#1] SMP [ 65.118076] Modules linked in: joydev evdev ext3 jbd mbcache sha256_generic aes_i586 aes_generic cbc dm_crypt crypto_blkcipher dm_mirror dm_log dm_snapshot dm_mod st sd_mod sg osst ide_cd_mod cdrom ide_pci_generic usb_storage piix uhci_hcd megaraid_mbox floppy qla1280 ide_core ata_generic libata megaraid_mm usbcore dock scsi_mod 3c59x mii thermal processor fan thermal_sys [ 65.118076] [ 65.118076] Pid: 1447, comm: udevd Not tainted (2.6.26-1-686 #1) [ 65.118076] EIP: 0060:[<f8857209>] EFLAGS: 00010282 CPU: 0 [ 65.118076] EIP is at megaraid_mbox_dpc+0x178/0x44a [megaraid_mbox] [ 65.118076] EAX: 00000000 EBX: f7804680 ECX: c0405bd8 EDX: 00000be0 [ 65.118076] ESI: 00000000 EDI: 00000000 EBP: f7460108 ESP: f7b11df4 [ 65.118076] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 65.118076] Process udevd (pid: 1447, ti=f7b10000 task=f74b6ca0 task.ti=f7b10000) [ 65.118076] Stack: f77c995e f7458000 f746c000 f7b11e10 f77f9880 f78a3300 f78a3300 f746010c [ 65.118076] f746010c f746010c f7458000 00000000 0000000a 00000000 c012689b 00000001 [ 65.118076] c0369a68 c012644d 00000046 c036a400 00000000 00000015 c01264ff 000007e0 [ 65.118076] Call Trace: [ 65.118076] [<c012689b>] tasklet_action+0x68/0xd0 [ 65.118076] [<c012644d>] __do_softirq+0x66/0xd3 [ 65.118076] [<c01264ff>] do_softirq+0x45/0x53 [ 65.118076] [<c01267b6>] irq_exit+0x35/0x67 [ 65.118076] [<c0105f53>] do_IRQ+0x52/0x63 [ 65.118076] [<c01042b7>] common_interrupt+0x23/0x28 [ 65.118076] [<c0162083>] do_wp_page+0x28a/0x49f [ 65.118076] [<c0163feb>] handle_mm_fault+0x623/0x690 [ 65.118076] [<c017cd53>] sys_mkdirat+0xca/0xd4 [ 65.118076] [<c0115b07>] do_page_fault+0x29b/0x5b8 [ 65.118076] [<c0172a15>] filp_close+0x4d/0x53 [ 65.118076] [<c011586c>] do_page_fault+0x0/0x5b8 [ 65.118076] [<c02b6d3a>] error_code+0x72/0x78 [ 65.118076] [<c02b0000>] cacheinfo_cpu_callback+0x4f/0xa6 [ 65.118076] ======================= [ 65.118076] Code: 0f b7 4d 24 0f b6 82 c4 33 00 00 d3 f8 a8 01 0f 84 83 00 00 00 8b 4c 24 10 8b 59 68 8b 03 83 e0 fc 74 10 e8 fb 9f 90 c7 8b 53 04 <f6> 04 10 1f 74 1c eb 65 83 3d 00 b5 85 f8 00 78 11 68 1d 09 00 [ 65.118076] EIP: [<f8857209>] megaraid_mbox_dpc+0x178/0x44a [megaraid_mbox] SS:ESP 0068:f7b11df4 [ 67.602238] Kernel panic - not syncing: Fatal exception in interrupt -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
