Re: Adaptec 29320LPE errors on boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/5/08, Matthew Wilcox <matthew@xxxxxx> wrote:
> On Wed, Mar 05, 2008 at 01:52:50PM -0300, Rodrigo Severo wrote:
>  > I changed the following values on  29320LPE from the previous default ones:
>  >
>  > Sync Transfer Rate: 160
>
>
> Ah, you've been fooled by SCSI terminology.

I don't think so.

>  U160 is 80 million
>  transfers per second,

Yes I know.

>  but each transfer is 16-bit wide,

Also know that.

>  so they call it
>  U160.

Yes I know that too.

I changed the Sync Transfer Rate from the 29320LPE default 320
MB/Second to it's second option: 160 MB/Second.

>  Can you try turning that down to 80 (and just for fun, if that
>  fails, can you try 40?)

Just for fun, I did. I tried 40 MB/Second. It took some more time
(around 30 extra seconds) but then I got the same error messages.


Rodrigo Severo

-- 
---------------------------------------------------------------------------------------
Rodrigo Severo

Fábrica de Idéias
SBS Quadra 2 - Bloco S - Ed. Empire Center - Sala 1.301
Brasília - DF - CEP 70070-904
Tel. (61) 3321-1357       Fax (61) 3223-1712
---------------------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux