Re: Adaptec 29320LPE errors on boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/5/08, Salyzyn, Mark <Mark_Salyzyn@xxxxxxxxxxx> wrote:
> Sounds like you have a bad SCSI cable or drive.
>
>  Do any of these drives work in any other OS environment?

This same drive with this same cable with this same terminator works
well with a 39160 (which usses another driver: the aic7xxx) on the
same OS environment so I don't think this is a cable or drive issue.

Besides I tested with four different cables (different models and
manufactures, all pretend to be U320 compatible). The problem is
unchanged when I use different cables and terminators.

I also tested with several different disks (different models and
manufactures). The problem is still unchanged.


Regards,

Rodrigo Severo

-- 
---------------------------------------------------------------------------------------
Rodrigo Severo

Fábrica de Idéias
SBS Quadra 2 - Bloco S - Ed. Empire Center - Sala 1.301
Brasília - DF - CEP 70070-904
Tel. (61) 3321-1357       Fax (61) 3223-1712
---------------------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux