On Wed, 2008-03-05 at 13:26 -0300, Rodrigo Severo wrote: > On 3/5/08, Salyzyn, Mark <Mark_Salyzyn@xxxxxxxxxxx> wrote: > > Sounds like you have a bad SCSI cable or drive. > > > > Do any of these drives work in any other OS environment? > > This same drive with this same cable with this same terminator works > well with a 39160 (which usses another driver: the aic7xxx) on the > same OS environment so I don't think this is a cable or drive issue. That's only ultra 160 capable. What happens if you take the speeds for the drives down in the bios of the 29320? > Besides I tested with four different cables (different models and > manufactures, all pretend to be U320 compatible). The problem is > unchanged when I use different cables and terminators. > > I also tested with several different disks (different models and > manufactures). The problem is still unchanged. It's sounding a bit more like a damaged board ... but try reducing the speed in the bios. James -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
