These patches are based on Martin Petersen's 5.16/scsi-queue tree https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git 5.16/scsi-queue This set of changes consist of: * Aligning device removal with our out of box driver. * Aligning kdump timing with controller memory dump. The OS was rebooting before the controller was finished dumping its own memory. Now the driver will wait for the controller to indicate that its dump has completed. * In rare cases where the controller stops responding to the driver, the driver can set reason codes to aid in debugging. * Enhance device reset operations. The driver was not obtaining the current number of outstanding commands during the check for outstanding command completions. This was causing reset hangs. * Add in a check for HBA devices undergoing sanitize. This was causing long boot up delays while the OS waited for sanitize to complete. The fix is to check for sanitize and keep the HBA disk offline. Note that the SSA spec states that the disk must be manually re-enabled after sanitize has completed. The link to the spec is noted in the patch. * When the OS off-lines a disk, the SCSI command pointers are cleaned up. The driver was attempting to return some outstanding commands that were no longer valid. * Add in more enhanced report physical luns (RPL) command. This is an internal command that yields more complete WWID information. * Correct a rare case where a poll for a register status before the register has been updated. * When multi-LUN tape devices are added to the OS, the OS does its own report LUNs and the tape devices were duplicated. A simple fix was to update slave_alloc/slave_configure to prevent this. * Add in some new PCI devices. * Bump the driver version. Changes since V1: * Corrected issues with my e-mail server. Don Brace (3): smartpqi: update device removal management smartpqi: add tur check for sanitize operation smartpqi: update version to 2.1.12-055 Kevin Barnett (2): smartpqi: update LUN reset handler smartpqi: fix duplicate device nodes for tape changers Mahesh Rajashekhara (2): smartpqi: add controller handshake during kdump smartpqi: avoid failing ios for offline devices Mike McGowen (3): smartpqi: add extended report physical luns smartpqi: fix boot failure during lun rebuild smartpqi: add 3252-8i pci id Murthy Bhat (1): smartpqi: capture controller reason codes drivers/scsi/smartpqi/smartpqi.h | 61 +- drivers/scsi/smartpqi/smartpqi_init.c | 540 +++++++++++++----- .../scsi/smartpqi/smartpqi_sas_transport.c | 6 +- drivers/scsi/smartpqi/smartpqi_sis.c | 60 +- drivers/scsi/smartpqi/smartpqi_sis.h | 4 +- 5 files changed, 509 insertions(+), 162 deletions(-) -- 2.28.0.rc1.9.ge7ae437ac1
