Add in a TUR to HBA disks and do not present them to the OS if 0x02/0x04/0x1b (sanitize in progress) is returned. During boot-up, some OSes appear to hang when there are one or more disks undergoing sanitize. According to SCSI SBC4 specification section 4.11.2 Commands allowed during sanitize, some SCSI commands are permitted, but read/write operations are not. When the OS attempts to read the disk partition table a CHECK CONDITION ASC 0x04 ASCQ 0x1b is returned which causes the OS to retry the read until sanitize has completed. This can take hours. Note: According to document HPE Smart Storage Administrator User Guide Link: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03909334 During the sanitize erase operation, the drive is unusable. I.E. The expected behavior for sanitize is the that disk remains offline even after sanitize has completed. The customer is expected to re-enable the disk using the management utility. Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx> Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx> Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx> Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx> --- drivers/scsi/smartpqi/smartpqi_init.c | 87 +++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index 01330fd67500..838274d8fadf 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -555,6 +555,10 @@ static int pqi_build_raid_path_request(struct pqi_ctrl_info *ctrl_info, cdb = request->cdb; switch (cmd) { + case TEST_UNIT_READY: + request->data_direction = SOP_READ_FLAG; + cdb[0] = TEST_UNIT_READY; + break; case INQUIRY: request->data_direction = SOP_READ_FLAG; cdb[0] = INQUIRY; @@ -1575,6 +1579,85 @@ static int pqi_get_logical_device_info(struct pqi_ctrl_info *ctrl_info, return rc; } +/* + * Prevent adding drive to OS for some corner cases such as a drive + * undergoing a sanitize operation. Some OSes will continue to poll + * the drive until the sanitize completes, which can take hours, + * resulting in long bootup delays. Commands such as TUR, READ_CAP + * are allowed, but READ/WRITE cause check condition. So the OS + * cannot check/read the partition table. + * Note: devices that have completed sanitize must be re-enabled + * using the management utility. + */ +static bool pqi_keep_device_offline(struct pqi_ctrl_info *ctrl_info, + struct pqi_scsi_dev *device) +{ + u8 scsi_status; + int rc; + enum dma_data_direction dir; + char *buffer; + int buffer_length = 64; + size_t sense_data_length; + struct scsi_sense_hdr sshdr; + struct pqi_raid_path_request request; + struct pqi_raid_error_info error_info; + bool offline = false; /* Assume keep online */ + + /* Do not check controllers. */ + if (pqi_is_hba_lunid(device->scsi3addr)) + return false; + + /* Do not check LVs. */ + if (pqi_is_logical_device(device)) + return false; + + buffer = kmalloc(buffer_length, GFP_KERNEL); + if (!buffer) + return false; /* Assume not offline */ + + /* Check for SANITIZE in progress using TUR */ + rc = pqi_build_raid_path_request(ctrl_info, &request, + TEST_UNIT_READY, RAID_CTLR_LUNID, buffer, + buffer_length, 0, &dir); + if (rc) + goto out; /* Assume not offline */ + + memcpy(request.lun_number, device->scsi3addr, sizeof(request.lun_number)); + + rc = pqi_submit_raid_request_synchronous(ctrl_info, &request.header, 0, &error_info); + + if (rc) + goto out; /* Assume not offline */ + + scsi_status = error_info.status; + sense_data_length = get_unaligned_le16(&error_info.sense_data_length); + if (sense_data_length == 0) + sense_data_length = + get_unaligned_le16(&error_info.response_data_length); + if (sense_data_length) { + if (sense_data_length > sizeof(error_info.data)) + sense_data_length = sizeof(error_info.data); + + /* + * Check for sanitize in progress: asc:0x04, ascq: 0x1b + */ + if (scsi_status == SAM_STAT_CHECK_CONDITION && + scsi_normalize_sense(error_info.data, + sense_data_length, &sshdr) && + sshdr.sense_key == NOT_READY && + sshdr.asc == 0x04 && + sshdr.ascq == 0x1b) { + device->device_offline = true; + offline = true; + goto out; /* Keep device offline */ + } + } + +out: + kfree(buffer); + return offline; +} + static int pqi_get_device_info(struct pqi_ctrl_info *ctrl_info, struct pqi_scsi_dev *device, struct bmic_identify_physical_device *id_phys) @@ -2296,6 +2379,10 @@ static int pqi_update_scsi_devices(struct pqi_ctrl_info *ctrl_info) if (!pqi_is_supported_device(device)) continue; + /* Do not present disks that the OS cannot fully probe */ + if (pqi_keep_device_offline(ctrl_info, device)) + continue; + /* Gather information about the device. */ rc = pqi_get_device_info(ctrl_info, device, id_phys); if (rc == -ENOMEM) { -- 2.28.0.rc1.9.ge7ae437ac1
