Alexis Bruemmer wrote:
Hi Tarjei,
I am glad that you a progressing forward!
Me too :-)
<snip>
Perhaps. Could you send a full output? It does not appear that the
aic94xx driver is loading at all...?
Duh again. I thought I had added the module to the initrd, but that
didn't happen.
Ok, I'm one step further. Where can I get the binary firmware the
adapter asks for?
The new sequencer has yet to be posted. You can, however, use the old
f/w in the meantime by backing out patch #38:
http://sweaglesw.net/~djwong/docs/sas_ata-patches/38-aic94xx-v28-sequencer_2.patch
Ok, did that. I now manage to load the module after boot when running
rmmod aic94xx and then modprobe aic94xx. However, I cannot get it to
load the firmware on boot. I've tried modifying the initram-fs image and
placing the module in both /lib/firmware/ and /lib/firmware/2.6.20-rc5/
but it seems not to find the firmware (aic94xx-seq.fw) in any of those
locations.
If I reload the module after booting, it will find the firmware in
/lib/firmware/2.6.20-rc5 without problems.
Any tips?
kind regards,
Tarjei
Any
Regards,
Alexis
[ 2.119258] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 2.119335] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level,
low) -> IRQ 18
[ 2.119379] aic94xx: found Adaptec AIC-9405W SAS/SATA Host Adapter,
device 0000:03:04.0
[ 2.119382] scsi0 : aic94xx
[ 12.158371] aic94xx: Failed to load sequencer firmware file
aic94xx-seq-v28.bin, error -2
[ 12.158375] aic94xx: couldn't init seqs for 0000:03:04.0
[ 12.158376] aic94xx: couldn't init the chip
Kind regards,
Tarjei
--D
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
