From: Bean Huo <beanhuo@xxxxxxxxxx>
This patch is to initialize max_lu_supported, it also adds a new
function ufshcd_init_device_geo_params() for initialization of UFS
device geometry descriptor related parameters which are used by
driver. In this version patch, there is only dev_info.max_lu_supported
being initialized.
Reviewed-by: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
Signed-off-by: Bean Huo <beanhuo@xxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 41 +++++++++++++++++++++++++++++++++++++--
1 file changed, 39 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 31b6e2a7c166..0c4fb5d447da 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6858,6 +6858,37 @@ static void ufshcd_init_desc_sizes(struct ufs_hba *hba)
hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE;
}
+static int ufshcd_init_device_geo_params(struct ufs_hba *hba)
+{
+ int err;
+ size_t buff_len;
+ u8 *desc_buf;
+
+ buff_len = hba->desc_size.geom_desc;
+ desc_buf = kmalloc(buff_len, GFP_KERNEL);
+ if (!desc_buf) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = ufshcd_read_desc(hba, QUERY_DESC_IDN_GEOMETRY, 0,
+ desc_buf, buff_len);
+ if (err) {
+ dev_err(hba->dev, "%s: Failed reading Geometry Desc. err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 1)
+ hba->dev_info.max_lu_supported = 32;
+ else if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 0)
+ hba->dev_info.max_lu_supported = 8;
+
+out:
+ kfree(desc_buf);
+ return err;
+}
+
static struct ufs_ref_clk ufs_ref_clk_freqs[] = {
{19200000, REF_CLK_FREQ_19_2_MHZ},
{26000000, REF_CLK_FREQ_26_MHZ},
@@ -6931,9 +6962,17 @@ static int ufs_init_params(struct ufs_hba *hba)
bool flag;
int ret;
+ /* Clear any previous UFS device information */
+ memset(&hba->dev_info, 0, sizeof(hba->dev_info));
+
/* Init check for device descriptor sizes */
ufshcd_init_desc_sizes(hba);
+ /* Init UFS geometry descriptor related parameters */
+ ret = ufshcd_init_device_geo_params(hba);
+ if (ret)
+ goto out;
+
/* Check and apply UFS device quirks */
ret = ufs_get_device_desc(hba);
if (ret) {
@@ -6944,8 +6983,6 @@ static int ufs_init_params(struct ufs_hba *hba)
ufs_fixup_device_setup(hba);
- /* Clear any previous UFS device information */
- memset(&hba->dev_info, 0, sizeof(hba->dev_info));
if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,
QUERY_FLAG_IDN_PWR_ON_WPE, &flag))
hba->dev_info.f_power_on_wp_en = flag;
--
2.17.1
