[PATCH v2 9/9] scsi: ufs: Use UFS device indicated maximum LU number

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bean Huo <beanhuo@xxxxxxxxxx>

According to Jedec standard UFS 3.0 and UFS 2.1 Spec, the maximum number
of logical units supported by the UFS device is indicated by parameter
bMaxNumberLU in Geometry Descriptor. This patch is to delete current
hard code macro definition of UFS_UPIU_MAX_GENERAL_LUN and switch to
use device indicated number instead.

Reviewed-by: Asutosh Das <asutoshd@xxxxxxxxxxxxxx>
Signed-off-by: Bean Huo <beanhuo@xxxxxxxxxx>
---
 drivers/scsi/ufs/ufs-sysfs.c |  2 +-
 drivers/scsi/ufs/ufs.h       | 12 +++++++++---
 drivers/scsi/ufs/ufshcd.c    |  4 ++--
 3 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index 720be3f64be7..dbdf8b01abed 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -713,7 +713,7 @@ static ssize_t _pname##_show(struct device *dev,			\
 	struct scsi_device *sdev = to_scsi_device(dev);			\
 	struct ufs_hba *hba = shost_priv(sdev->host);			\
 	u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun);			\
-	if (!ufs_is_valid_unit_desc_lun(lun))				\
+	if (!ufs_is_valid_unit_desc_lun(&hba->dev_info, lun))		\
 		return -EINVAL;						\
 	return ufs_sysfs_read_desc_param(hba, QUERY_DESC_IDN_##_duname,	\
 		lun, _duname##_DESC_PARAM##_puname, buf, _size);	\
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index c982bcc94662..dde2eb02f76f 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -63,7 +63,6 @@
 #define UFS_UPIU_MAX_UNIT_NUM_ID	0x7F
 #define UFS_MAX_LUNS		(SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
 #define UFS_UPIU_WLUN_ID	(1 << 7)
-#define UFS_UPIU_MAX_GENERAL_LUN	8
 
 /* Well known logical unit id in LUN field of UPIU */
 enum {
@@ -539,12 +538,19 @@ struct ufs_dev_info {
 
 /**
  * ufs_is_valid_unit_desc_lun - checks if the given LUN has a unit descriptor
+ * @dev_info: pointer of instance of struct ufs_dev_info
  * @lun: LU number to check
  * @return: true if the lun has a matching unit descriptor, false otherwise
  */
-static inline bool ufs_is_valid_unit_desc_lun(u8 lun)
+static inline bool ufs_is_valid_unit_desc_lun(struct ufs_dev_info *dev_info,
+		u8 lun)
 {
-	return lun == UFS_UPIU_RPMB_WLUN || (lun < UFS_UPIU_MAX_GENERAL_LUN);
+	if (!dev_info || !dev_info->max_lu_supported) {
+		pr_err("Max General LU supported by UFS isn't initilized\n");
+		return false;
+	}
+
+	return lun == UFS_UPIU_RPMB_WLUN || (lun < dev_info->max_lu_supported);
 }
 
 #endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 0c4fb5d447da..a942d5346793 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3270,7 +3270,7 @@ static inline int ufshcd_read_unit_desc_param(struct ufs_hba *hba,
 	 * Unit descriptors are only available for general purpose LUs (LUN id
 	 * from 0 to 7) and RPMB Well known LU.
 	 */
-	if (!ufs_is_valid_unit_desc_lun(lun))
+	if (!ufs_is_valid_unit_desc_lun(&hba->dev_info, lun))
 		return -EOPNOTSUPP;
 
 	return ufshcd_read_desc_param(hba, QUERY_DESC_IDN_UNIT, lun,
@@ -4525,7 +4525,7 @@ static int ufshcd_get_lu_wp(struct ufs_hba *hba,
 	 * protected so skip reading bLUWriteProtect parameter for
 	 * it. For other W-LUs, UNIT DESCRIPTOR is not available.
 	 */
-	else if (lun >= UFS_UPIU_MAX_GENERAL_LUN)
+	else if (lun >= hba->dev_info.max_lu_supported)
 		ret = -ENOTSUPP;
 	else
 		ret = ufshcd_read_unit_desc_param(hba,
-- 
2.17.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux