On Tue, Dec 17, 2019 at 8:08 AM Vinod Koul <vkoul@xxxxxxxxxx> wrote:
>
> On 17-12-19, 18:09, cang@xxxxxxxxxxxxxx wrote:
> > On 2019-12-17 17:24, Vinod Koul wrote:
> > > Hi Can,
> > >
> > > On 17-12-19, 15:10, cang@xxxxxxxxxxxxxx wrote:
> > > > On 2019-12-17 12:13, Vinod Koul wrote:
> > > > > Hi Can,
> > > > >
> > > > > On 17-12-19, 08:37, cang@xxxxxxxxxxxxxx wrote:
> > > > > > On 2019-12-17 03:12, Jeffrey Hugo wrote:
> > > > > > > On Mon, Dec 16, 2019 at 12:05 PM Vinod Koul <vkoul@xxxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > Hi Can,
> > > > > > > >
> > > > > > > > On 14-11-19, 22:09, Can Guo wrote:
> > > > > > > > > Add reset control for host controller so that host controller can be reset
> > > > > > > > > as required in its power up sequence.
> > > > > > > >
> > > > > > > > I am seeing a regression on UFS on SM8150-mtp with this patch. I think
> > > > > > > > Jeff is seeing same one lenove laptop on 8998.
> > > > > > >
> > > > > > > Confirmed.
> > > > > > >
> > > > > > > >
> > > > > > > > 845 does not seem to have this issue and only thing I can see is
> > > > > > > > that on
> > > > > > > > sm8150 and 8998 we define reset as:
> > > > > > > >
> > > > > > > > resets = <&gcc GCC_UFS_BCR>;
> > > > > > > > reset-names = "rst";
> > > > > > > >
> > > > > >
> > > > > > Hi Jeffrey and Vinod,
> > > > > >
> > > > > > Thanks for reporting this. May I know what kind of regression do you
> > > > > > see on
> > > > > > 8150 and 8998?
> > > > > > BTW, do you have reset control for UFS PHY in your DT?
> > > > > > See 71278b058a9f8752e51030e363b7a7306938f64e.
> > > > > >
> > > > > > FYI, we use reset control on all of our platforms and it is
> > > > > > a must during our power up sequence.
> > > > >
> > > > > Yes we do have this and additionally both the DTS describe a 'rst' reset
> > > > > and this patch tries to use this.
> > > > >
> > > > > Can you please tell me which platform this was tested on how the reset
> > > > > was described in DT
> > > > >
> > > > > Thanks
> > > >
> > > > Hi Vinod,
> > > >
> > > > If you are using the 8998's DT present on upstream, you may also
> > > > need to
> > > > enable
> > > > device reset on your platform. (We usually do a device reset before
> > > > call
> > > > ufshcd_hba_enable())
> > > > Given that 845 works fine, it may be the difference you have with
> > > > 845. 845
> > > > has device
> > > > reset support ready in upstream code, you can check sdm845-mtp.dts.
> > > > It is same for 8150, which is a lack of device reset support in
> > > > upstream
> > > > code base.
> > >
> > > I am using 8150mtp and you can see the DTS at [1]
> > > with this patch I get phy timeout error
> > >
> > > [ 2.532594] qcom-qmp-phy 1d87000.phy: phy initialization timed-out
> > >
> > > If i revert this patch the Timeout goes away. UFS node for this platform
> > > is enabled in [2] and [3]
> > >
> > > I did add the GPIO as well for testing but that doesnt work, only thing
> > > that makes it work is rename the reset line to something other that
> > > 'rst'
> > >
> > > I found that with this patch the reset is invoked twice, not sure why!
> > >
> > > The 845 does not define a reset 'rst' but both 8150 and 8998 define
> > > that!
> > >
> > > [1]:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/log/?h=for-next
> > > [2]:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?h=for-next&id=3834a2e92229ef26d30de28acb698b2b23d3e397
> > > [3]:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git/commit/?h=for-next&id=3e5bf28d2c3981f949e848eec8a60e0b9b61189d
> > > >
> > > > To enable UFS device reset, please see
> > > > 1. https://lore.kernel.org/linux-arm-msm/20190828191756.24312-4-bjorn.andersson@xxxxxxxxxx/
> > > > 2. 53a5372ce326116f3e3d3f1d701113b2542509f4
> > >
> > > Yes both are added for UFS and I am testing with these..
> > > >
> > > > FYI, I tested the patch on 8250 and its family platforms. In my
> > > > build, I
> > > > ported
> > > > change in #2 to my code base (in your case, make change to
> > > > drivers/pinctrl/qcom/pinctrl-msm8998.c) and enable the GPIO in DT like
> > > > sdm845-mtp.dts
> > >
> > > Please see drivers/pinctrl/qcom/pinctrl-sm8150.c upstream
> > >
> > > > reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
> > >
> > > Yup, added:
> > >
> > > reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> >
> > Hi Vinod,
> >
> > What do you mean by the reset is invoked twice?
> >
> > Renaming 'rst' to something else equals disabling this patch.
> >
> > You said 845 has not this problem, I thought you tested the patch on 845
> > with
> > the same 'rst' defined on 8998 and 8150. If 'rst' is not present in 845's
> > DT,
> > it means this patch has no impact on 845.
>
> To clarify: This problem is not seen in 845 with upstream kernel ie
> 5.5-rc1 but regression is observed in sm8150 and 8998 (Jeff)
>
> And if I add the reset line to 845 (i am testing on dragon board
> RB3, I am seeing same issue here as well)
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -1374,6 +1374,8 @@
> lanes-per-direction = <2>;
> power-domains = <&gcc UFS_PHY_GDSC>;
> #reset-cells = <1>;
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
>
> iommus = <&apps_smmu 0x100 0xf>;
>
>
> And on boot i am seeing UFS failing:
>
> [ 3.205567] qcom-qmp-phy 88eb000.phy: Registered Qcom-QMP phy
> [ 3.215440] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
> [ 3.226315] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
> [ 3.236844] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
> [ 3.257053] scsi host0: ufshcd
> [ 3.275109] qcom-qmp-phy 1d87000.phy: phy initialization timed-out
> [ 3.283677] qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x40904
> [ 3.290508] phy phy-1d87000.phy.0: phy poweron failed --> -110
> [ 3.296407] ufshcd-qcom 1d84000.ufshc: ufs_qcom_power_up_sequence: phy power on failed, ret = -110
> [ 3.360851] ufshcd-qcom 1d84000.ufshc: Controller enable failed
> [ 3.366838] ufshcd-qcom 1d84000.ufshc: Host controller enable failed
>
> > Actually, in our code base, we are not using phy-qcom-qmp.c. Instead,
> > we are using phy-qcom-ufs.c. phy-qcom-ufs.c is the one we use in all of our
> > mobile projects. Although both have the same functionality,
> > but in phy-qcom-ufs.c, the PCS ready bit polling timeout is 1000000us,
> > while in phy-qcom-qmp.c the PCS ready bit polling timeout is 1000us.
> > Would you mind give below change a try?
>
> Sure and this seems to do the trick on 845 with resets defined, Jeff can
> you try this on your laptop
I'm attaching a complete log of the failure I see.
Increasing PHY_INIT_COMPLETE_TIMEOUT to the indicated value appears to
fix the issue for me.
>
> But I dont get same result on sm8150-mtp, i am still seeing timeout with
> 1000000us.
>
> The bigger question is why is the reset causing the timeout to be
> increased for sdm845 and not to work in case of sm8150!
>
> > FYI, I tried the opposite change on my board (decrease the PCS polling
> > timeout
> > used in phy-qcom-ufs.c), I did see PCS polling timeout, which is the same
> > failure
> > you encountered.
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c
> > b/drivers/phy/qualcomm/phy-qcom-qmp.c
> > index 39e8deb..0ee9149 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> > @@ -66,7 +66,7 @@
> > /* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
> > #define CLAMP_EN BIT(0) /* enables i/o
> > clamp_n */
> >
> > -#define PHY_INIT_COMPLETE_TIMEOUT 1000
> > +#define PHY_INIT_COMPLETE_TIMEOUT 1000000
> > #define POWER_DOWN_DELAY_US_MIN 10
> > #define POWER_DOWN_DELAY_US_MAX 11
> >
> > On 845, if there is 'rst'
> >
> > Thanks.
>
> --
> ~Vinod
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[ 0.000000] Linux version 5.5.0-rc2+ (ubuntu@aw-bldr-10) (gcc version 6.5.0 20181026 (Ubuntu/Linaro 6.5.0-2ubuntu1~18.04)) #1069 SMP PREEMPT Tue Dec 17 07:23:35 PST 2019
[ 0.000000] Machine model: Lenovo Miix 630
[ 0.000000] printk: debug: ignoring loglevel setting.
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x9dfd7000 ESRT=0x9a7f1f98 SMBIOS=0x9df36000 MEMATTR=0x9c03c018 TPMEventLog=0x9d8b8018 RNG=0x9ded5f98 MEMRESERVE=0x9d8b7018
[ 0.000000] efi: seeding entropy pool
[ 0.000000] efi: memattr: Unexpected EFI Memory Attributes table version -1347440721
[ 0.000000] esrt: Reserving ESRT space from 0x000000009a7f1f98 to 0x000000009a7f1fd0.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e4bffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17dd65100-0x17dd66fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000017e4bffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000803fffff]
[ 0.000000] node 0: [mem 0x0000000080400000-0x0000000080d5ffff]
[ 0.000000] node 0: [mem 0x0000000080eb0000-0x00000000857fffff]
[ 0.000000] node 0: [mem 0x0000000088f00000-0x000000008aafffff]
[ 0.000000] node 0: [mem 0x000000008ab00000-0x000000008cbfffff]
[ 0.000000] node 0: [mem 0x0000000093c00000-0x00000000940fffff]
[ 0.000000] node 0: [mem 0x0000000094300000-0x00000000956fffff]
[ 0.000000] node 0: [mem 0x0000000095800000-0x000000009dd93fff]
[ 0.000000] node 0: [mem 0x000000009dd94000-0x000000009df87fff]
[ 0.000000] node 0: [mem 0x000000009df88000-0x000000009f9fffff]
[ 0.000000] node 0: [mem 0x000000009fc00000-0x000000009ffcffff]
[ 0.000000] node 0: [mem 0x000000009ffd0000-0x000000009ffd9fff]
[ 0.000000] node 0: [mem 0x000000009ffdd000-0x00000000abdfffff]
[ 0.000000] node 0: [mem 0x00000000abe00000-0x000000017e4bffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 412 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e4bffff]
[ 0.000000] On node 0 totalpages: 997229
[ 0.000000] DMA zone: 3403 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 217773 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 4096 pages used for memmap
[ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
[ 0.000000] Normal zone: 8083 pages used for memmap
[ 0.000000] Normal zone: 517312 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] percpu: Embedded 22 pages/cpu s53016 r8192 d28904 u90112
[ 0.000000] pcpu-alloc: s53016 r8192 d28904 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 981647
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.5.0-rc2+ root=UUID=67afc572-56a9-4a7e-b17f-08d5fedf332c ro nokaslr efi=novamap ignore_loglevel log_buf_len=16M
[ 0.000000] printk: log_buf_len: 16777216 bytes
[ 0.000000] printk: early log buf free: 126932(96%)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[ 0.000000] Memory: 3481848K/3988916K available (12284K kernel code, 1964K rwdata, 6776K rodata, 5184K init, 460K bss, 474300K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: 608 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017b00000
[ 0.000000] ITS: No ITS available, not enabling LPIs
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x454 with crng_init=0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000113] Console: colour dummy device 80x25
[ 0.000663] printk: console [tty0] enabled
[ 0.000724] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000741] pid_max: default: 32768 minimum: 301
[ 0.000808] LSM: Security Framework initializing
[ 0.000865] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000886] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.023444] ASID allocator initialised with 32768 entries
[ 0.031442] rcu: Hierarchical SRCU implementation.
[ 0.041360] Remapping and enabling EFI services.
[ 0.047467] smp: Bringing up secondary CPUs ...
[ 0.080848] Detected VIPT I-cache on CPU1
[ 0.080879] GICv3: CPU1: found redistributor 1 region 0:0x0000000017b20000
[ 0.080926] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[ 0.112731] Detected VIPT I-cache on CPU2
[ 0.112753] GICv3: CPU2: found redistributor 2 region 0:0x0000000017b40000
[ 0.112791] CPU2: Booted secondary processor 0x0000000002 [0x51af8014]
[ 0.144768] Detected VIPT I-cache on CPU3
[ 0.144790] GICv3: CPU3: found redistributor 3 region 0:0x0000000017b60000
[ 0.144829] CPU3: Booted secondary processor 0x0000000003 [0x51af8014]
[ 0.177161] Detected VIPT I-cache on CPU4
[ 0.177224] GICv3: CPU4: found redistributor 100 region 0:0x0000000017b80000
[ 0.177299] CPU4: Booted secondary processor 0x0000000100 [0x51af8001]
[ 0.209021] Detected VIPT I-cache on CPU5
[ 0.209081] GICv3: CPU5: found redistributor 101 region 0:0x0000000017ba0000
[ 0.209150] CPU5: Booted secondary processor 0x0000000101 [0x51af8001]
[ 0.241080] Detected VIPT I-cache on CPU6
[ 0.241144] GICv3: CPU6: found redistributor 102 region 0:0x0000000017bc0000
[ 0.241214] CPU6: Booted secondary processor 0x0000000102 [0x51af8001]
[ 0.273142] Detected VIPT I-cache on CPU7
[ 0.273208] GICv3: CPU7: found redistributor 103 region 0:0x0000000017be0000
[ 0.273279] CPU7: Booted secondary processor 0x0000000103 [0x51af8001]
[ 0.273448] smp: Brought up 1 node, 8 CPUs
[ 0.273589] SMP: Total of 8 processors activated.
[ 0.273598] CPU features: detected: 32-bit EL0 Support
[ 0.273607] CPU features: detected: CRC32 instructions
[ 0.773881] CPU: All CPU(s) started at EL1
[ 0.773934] alternatives: patching kernel code
[ 0.775716] devtmpfs: initialized
[ 0.780404] KASLR disabled on command line
[ 0.780722] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.780745] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.781749] pinctrl core: initialized pinctrl subsystem
[ 0.782750] thermal_sys: Registered thermal governor 'step_wise'
[ 0.782753] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.784005] SMBIOS 3.0 present.
[ 0.784027] DMI: LENOVO 81F1/LNVNB161216, BIOS 8WCN25WW 05/10/2018
[ 0.784357] NET: Registered protocol family 16
[ 0.785415] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.785429] audit: initializing netlink subsys (disabled)
[ 0.785580] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1
[ 0.786442] cpuidle: using governor menu
[ 0.786673] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.789734] Serial: AMBA PL011 UART driver
[ 0.829059] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.829100] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.829132] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.829162] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.831983] cryptd: max_cpu_qlen set to 1000
[ 0.836699] ACPI: Interpreter disabled.
[ 0.838932] iommu: Default domain type: Translated
[ 0.839236] vgaarb: loaded
[ 0.839771] SCSI subsystem initialized
[ 0.840013] libata version 3.00 loaded.
[ 0.840397] usbcore: registered new interface driver usbfs
[ 0.840502] usbcore: registered new interface driver hub
[ 0.840674] usbcore: registered new device driver usb
[ 0.841766] pps_core: LinuxPPS API ver. 1 registered
[ 0.841796] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.841850] PTP clock support registered
[ 0.842051] EDAC MC: Ver: 3.0.0
[ 0.843270] Registered efivars operations
[ 0.844728] FPGA manager framework
[ 0.844875] Advanced Linux Sound Architecture Driver Initialized.
[ 0.846219] clocksource: Switched to clocksource arch_sys_counter
[ 0.846568] VFS: Disk quotas dquot_6.6.0
[ 0.846683] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.846956] pnp: PnP ACPI: disabled
[ 0.856606] s1: supplied by vph_pwr
[ 0.856712] NET: Registered protocol family 2
[ 0.856764] s2: supplied by vph_pwr
[ 0.856869] s3: supplied by vph_pwr
[ 0.856895] s3: Bringing 0uV into 1352000-1352000uV
[ 0.856989] s4: supplied by vph_pwr
[ 0.857013] s4: Bringing 0uV into 1800000-1800000uV
[ 0.857107] s5: supplied by vph_pwr
[ 0.857144] s5: Bringing 0uV into 1904000-1904000uV
[ 0.857243] s6: supplied by vph_pwr
[ 0.857341] s7: supplied by vph_pwr
[ 0.857364] s7: Bringing 0uV into 900000-900000uV
[ 0.857420] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.857464] s8: supplied by vph_pwr
[ 0.857534] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.857598] s9: supplied by vph_pwr
[ 0.857703] s10: supplied by vph_pwr
[ 0.857805] s11: supplied by vph_pwr
[ 0.857915] s12: supplied by vph_pwr
[ 0.858013] s13: supplied by vph_pwr
[ 0.858109] l1: supplied by s7
[ 0.858137] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.858147] l1: Bringing 0uV into 880000-880000uV
[ 0.858308] l2: supplied by s3
[ 0.858334] l2: Bringing 0uV into 1200000-1200000uV
[ 0.858424] l3: supplied by s7
[ 0.858448] l3: Bringing 0uV into 1000000-1000000uV
[ 0.858546] l4: supplied by s7
[ 0.858659] l5: supplied by s7
[ 0.858685] l5: Bringing 0uV into 800000-800000uV
[ 0.858779] l6: supplied by s5
[ 0.858802] l6: Bringing 0uV into 1808000-1808000uV
[ 0.858818] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.858903] l7: supplied by s5
[ 0.858936] l7: Bringing 0uV into 1800000-1800000uV
[ 0.859002] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.859046] l8: supplied by s3
[ 0.859079] l8: Bringing 0uV into 1200000-1200000uV
[ 0.859143] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.859176] l9: supplied by vph_pwr
[ 0.859215] l9: Bringing 0uV into 1808000-1808000uV
[ 0.859318] l10: supplied by vph_pwr
[ 0.859341] l10: Bringing 0uV into 1808000-1808000uV
[ 0.859457] l11: supplied by s7
[ 0.859482] l11: Bringing 0uV into 1000000-1000000uV
[ 0.859488] NET: Registered protocol family 1
[ 0.859594] l12: supplied by s5
[ 0.859617] l12: Bringing 0uV into 1800000-1800000uV
[ 0.859717] l13: supplied by vph_pwr
[ 0.859744] l13: Bringing 0uV into 1808000-1808000uV
[ 0.859860] l14: supplied by s5
[ 0.859883] l14: Bringing 0uV into 1880000-1880000uV
[ 0.859984] l15: supplied by s5
[ 0.860008] l15: Bringing 0uV into 1800000-1800000uV
[ 0.860025] RPC: Registered named UNIX socket transport module.
[ 0.860061] RPC: Registered udp transport module.
[ 0.860086] RPC: Registered tcp transport module.
[ 0.860109] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.860111] l16: supplied by vph_pwr
[ 0.860132] l16: Bringing 0uV into 2704000-2704000uV
[ 0.860177] PCI: CLS 0 bytes, default 64
[ 0.860243] l17: supplied by s3
[ 0.860279] l17: Bringing 0uV into 1304000-1304000uV
[ 0.860385] l18: supplied by vph_pwr
[ 0.860412] l18: Bringing 0uV into 2704000-2704000uV
[ 0.860433] Unpacking initramfs...
[ 0.860518] l19: supplied by vph_pwr
[ 0.860552] l19: Bringing 0uV into 3008000-3008000uV
[ 0.860660] l20: supplied by vph_pwr
[ 0.860698] l20: Bringing 0uV into 2960000-2960000uV
[ 0.860811] l21: supplied by vph_pwr
[ 0.860838] l21: Bringing 0uV into 2960000-2960000uV
[ 0.860948] l22: supplied by vph_pwr
[ 0.860971] l22: Bringing 0uV into 2864000-2864000uV
[ 0.861080] l23: supplied by vph_pwr
[ 0.861119] l23: Bringing 0uV into 3312000-3312000uV
[ 0.861226] l24: supplied by vph_pwr
[ 0.861249] l24: Bringing 0uV into 3088000-3088000uV
[ 0.861361] l25: supplied by vph_pwr
[ 0.861389] l25: Bringing 0uV into 3104000-3104000uV
[ 0.861504] l26: supplied by s3
[ 0.861540] l26: Bringing 0uV into 1200000-1200000uV
[ 0.861644] l27: supplied by s7
[ 0.861757] l28: supplied by vph_pwr
[ 0.861781] l28: Bringing 0uV into 3008000-3008000uV
[ 0.861894] lvs1: supplied by s4
[ 0.862028] lvs2: supplied by s4
[ 3.104979] Freeing initrd memory: 18804K
[ 3.106251] kvm [1]: HYP mode not available
[ 3.190294] Initialise system trusted keyrings
[ 3.190543] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 3.202329] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.203562] NFS: Registering the id_resolver key type
[ 3.203618] Key type id_resolver registered
[ 3.203643] Key type id_legacy registered
[ 3.203680] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.203907] 9p: Installing v9fs 9p2000 file system support
[ 3.232621] Key type asymmetric registered
[ 3.232651] Asymmetric key parser 'x509' registered
[ 3.232709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 3.232722] io scheduler mq-deadline registered
[ 3.232730] io scheduler kyber registered
[ 3.238478] efifb: probing for efifb
[ 3.238534] efifb: framebuffer at 0x80400000, using 9600k, total 9600k
[ 3.238545] efifb: mode is 1920x1280x32, linelength=7680, pages=1
[ 3.238553] efifb: scrolling: redraw
[ 3.238561] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.261582] Console: switching to colour frame buffer device 240x80
[ 3.283507] fb0: EFI VGA frame buffer device
[ 3.283888] EINJ: ACPI disabled.
[ 3.292957] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.294485] SuperH (H)SCI(F) driver initialized
[ 3.294977] msm_serial c171000.serial: msm_serial: detected port #0
[ 3.295109] msm_serial: driver initialized
[ 3.295886] arm-smmu 1680000.iommu: probing hardware configuration...
[ 3.295986] arm-smmu 1680000.iommu: SMMUv2 with:
[ 3.296077] arm-smmu 1680000.iommu: stage 1 translation
[ 3.296159] arm-smmu 1680000.iommu: address translation ops
[ 3.296246] arm-smmu 1680000.iommu: non-coherent table walk
[ 3.296332] arm-smmu 1680000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 3.296444] arm-smmu 1680000.iommu: stream matching with 16 register groups
[ 3.296570] arm-smmu 1680000.iommu: 6 context banks (0 stage-2 only)
[ 3.296679] arm-smmu 1680000.iommu: Supported page sizes: 0x63315000
[ 3.296777] arm-smmu 1680000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 3.297844] arm-smmu 16c0000.iommu: probing hardware configuration...
[ 3.297944] arm-smmu 16c0000.iommu: SMMUv2 with:
[ 3.298026] arm-smmu 16c0000.iommu: stage 1 translation
[ 3.298108] arm-smmu 16c0000.iommu: address translation ops
[ 3.298194] arm-smmu 16c0000.iommu: non-coherent table walk
[ 3.298298] arm-smmu 16c0000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 3.298409] arm-smmu 16c0000.iommu: stream matching with 14 register groups
[ 3.298533] arm-smmu 16c0000.iommu: 10 context banks (0 stage-2 only)
[ 3.298642] arm-smmu 16c0000.iommu: Supported page sizes: 0x63315000
[ 3.298740] arm-smmu 16c0000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 3.306005] loop: module loaded
[ 3.308351] spmi spmi-0: PMIC arbiter version v3 (0x30000000)
[ 3.314253] gpio gpiochip2: (800f000.spmi:pmic@4:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 3.315167] libphy: Fixed MDIO Bus: probed
[ 3.315414] tun: Universal TUN/TAP device driver, 1.6
[ 3.316009] thunder_xcv, ver 1.0
[ 3.316082] thunder_bgx, ver 1.0
[ 3.316153] nicpf, ver 1.0
[ 3.316561] hclge is initializing
[ 3.316616] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 3.316724] hns3: Copyright (c) 2017 Huawei Corporation.
[ 3.316836] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.316925] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.317037] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 3.317142] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.317247] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.317365] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.317665] sky2: driver version 1.30
[ 3.318166] VFIO - User Level meta-driver version: 0.3
[ 3.319369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.319471] ehci-pci: EHCI PCI platform driver
[ 3.319558] ehci-platform: EHCI generic platform driver
[ 3.319712] ehci-orion: EHCI orion driver
[ 3.319833] ehci-exynos: EHCI EXYNOS driver
[ 3.324219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.328586] ohci-pci: OHCI PCI platform driver
[ 3.332991] ohci-platform: OHCI generic platform driver
[ 3.337466] ohci-exynos: OHCI EXYNOS driver
[ 3.342165] usbcore: registered new interface driver usb-storage
[ 3.348475] i2c /dev entries driver
[ 3.353298] i2c_qup c17a000.i2c:
tx channel not available
[ 3.362000] i2c_qup c17a000.i2c: Could not get core clock
[ 3.371449] sdhci: Secure Digital Host Controller Interface driver
[ 3.375883] sdhci: Copyright(c) Pierre Ossman
[ 3.380512] Synopsys Designware Multimedia Card Interface Driver
[ 3.385479] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.390753] sdhci_msm c0a4900.sdhci: Got CD GPIO
[ 3.395189] sdhci_msm c0a4900.sdhci: Peripheral clk setup failed (-517)
[ 3.400317] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.405646] usbcore: registered new interface driver usbhid
[ 3.410023] usbhid: USB HID core driver
[ 3.417295] NET: Registered protocol family 17
[ 3.421819] 9pnet: Installing 9P2000 support
[ 3.426240] Key type dns_resolver registered
[ 3.431087] registered taskstats version 1
[ 3.435439] Loading compiled-in X.509 certificates
[ 3.458184] msm_serial c171000.serial: msm_serial: detected port #1
[ 3.462631] msm_serial c171000.serial: uartclk = 19200000
[ 3.466992] c171000.serial: ttyMSM1 at MMIO 0xc171000 (irq = 39, base_baud = 1200000) is a MSM
[ 3.472467] serial serial0: tty port ttyMSM1 registered
[ 3.479404] dwc3-qcom a8f8800.usb: IRQ dp_hs_phy_irq not found
[ 3.483828] dwc3-qcom a8f8800.usb: IRQ dm_hs_phy_irq not found
[ 3.489274] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[ 3.494545] i2c_qup c17a000.i2c:
tx channel not available
[ 3.504639] sdhci_msm c0a4900.sdhci: Got CD GPIO
[ 3.547769] mmc0: SDHCI controller on c0a4900.sdhci [c0a4900.sdhci] using ADMA 64-bit
[ 3.553723] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[ 3.559870] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[ 3.565639] hctosys: unable to open rtc device (rtc0)
[ 3.570759] ------------[ cut here ]------------
[ 3.575178] gcc_gpu_bimc_gfx_clk status stuck at 'on'
[ 3.575210] WARNING: CPU: 3 PID: 1 at drivers/clk/qcom/clk-branch.c:92 clk_branch_toggle+0x160/0x170
[ 3.584197] Modules linked in:
[ 3.588735] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc2+ #1069
[ 3.593346] Hardware name: LENOVO 81F1/LNVNB161216, BIOS 8WCN25WW 05/10/2018
[ 3.598019] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 3.602722] pc : clk_branch_toggle+0x160/0x170
[ 3.607442] lr : clk_branch_toggle+0x160/0x170
[ 3.612115] sp : ffff80001005bd00
[ 3.616762] x29: ffff80001005bd00 x28: 0000000000000000
[ 3.621425] x27: ffff8000113e8070 x26: ffff8000113305a0
[ 3.626079] x25: ffff8000111a81e0 x24: 0000000000000000
[ 3.630723] x23: ffff80001192be00 x22: ffff8000105f2420
[ 3.635326] x21: 0000000000000000 x20: ffff800011849000
[ 3.639899] x19: 0000000000000000 x18: ffffffffffffffff
[ 3.644356] x17: 0000000000001800 x16: 0000000000008f20
[ 3.648695] x15: 0000000000001e00 x14: 0000000000000001
[ 3.653000] x13: ffff800010da6b90 x12: ffff0000f4111ca0
[ 3.657292] x11: 0000000000000001 x10: 0000000000000020
[ 3.661614] x9 : 00000000ffffffff x8 : ffff800011a3bb98
[ 3.665947] x7 : 6375747320737574 x6 : ffff800011a3b6b9
[ 3.670282] x5 : 0000000000000000 x4 : 0000000000000000
[ 3.674589] x3 : 00000000ffffffff x2 : ffff8000ec875000
[ 3.678857] x1 : 6024f5744eae8900 x0 : 0000000000000000
[ 3.683102] Call trace:
[ 3.687307] clk_branch_toggle+0x160/0x170
[ 3.691497] clk_branch2_disable+0x18/0x20
[ 3.695646] clk_disable_unused_subtree+0xac/0xe4
[ 3.699760] clk_disable_unused+0x5c/0xe8
[ 3.703814] do_one_initcall+0x58/0x1a0
[ 3.707851] kernel_init_freeable+0x19c/0x20c
[ 3.711875] kernel_init+0x10/0x108
[ 3.715849] ret_from_fork+0x10/0x1c
[ 3.719791] ---[ end trace a886f7912f8296e8 ]---
[ 3.724105] ------------[ cut here ]------------
[ 3.728060] gcc_rx1_usb2_clkref_clk status stuck at 'on'
[ 3.728081] WARNING: CPU: 3 PID: 1 at drivers/clk/qcom/clk-branch.c:92 clk_branch_toggle+0x160/0x170
[ 3.736139] Modules linked in:
[ 3.740180] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.5.0-rc2+ #1069
[ 3.744312] Hardware name: LENOVO 81F1/LNVNB161216, BIOS 8WCN25WW 05/10/2018
[ 3.748473] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 3.752615] pc : clk_branch_toggle+0x160/0x170
[ 3.756741] lr : clk_branch_toggle+0x160/0x170
[ 3.760843] sp : ffff80001005bcc0
[ 3.764943] x29: ffff80001005bcc0 x28: 0000000000000000
[ 3.769047] x27: ffff8000113e8070 x26: ffff8000113305a0
[ 3.773113] x25: ffff8000111a7900 x24: 0000000000000000
[ 3.777151] x23: ffff80001192a6f8 x22: ffff8000105f2420
[ 3.781156] x21: 0000000000000000 x20: ffff800011849000
[ 3.785127] x19: 0000000000000000 x18: ffffffffffffffff
[ 3.789068] x17: 0000000000001800 x16: 0000000000008f20
[ 3.792995] x15: 0000000000001e00 x14: 0000000000000001
[ 3.796864] x13: ffff800010da6b90 x12: ffff0000f4111f90
[ 3.800706] x11: 0000000000000001 x10: 0000000000000020
[ 3.804533] x9 : 00000000ffffffff x8 : ffff800011a3bb98
[ 3.808352] x7 : 7320737574617473 x6 : ffff800011a3b6bc
[ 3.812156] x5 : 0000000000000000 x4 : 0000000000000000
[ 3.815963] x3 : 00000000ffffffff x2 : ffff8000ec875000
[ 3.819759] x1 : 6024f5744eae8900 x0 : 0000000000000000
[ 3.823544] Call trace:
[ 3.827274] clk_branch_toggle+0x160/0x170
[ 3.831026] clk_branch2_disable+0x18/0x20
[ 3.834713] clk_disable_unused_subtree+0xac/0xe4
[ 3.838361] clk_disable_unused_subtree+0x3c/0xe4
[ 3.841954] clk_disable_unused_subtree+0x3c/0xe4
[ 3.845545] clk_disable_unused+0x5c/0xe8
[ 3.849094] do_one_initcall+0x58/0x1a0
[ 3.852624] kernel_init_freeable+0x19c/0x20c
[ 3.856166] kernel_init+0x10/0x108
[ 3.859676] ret_from_fork+0x10/0x1c
[ 3.863130] ---[ end trace a886f7912f8296e9 ]---
[ 3.866731] ALSA device list:
[ 3.870184] No soundcards found.
[ 3.875145] Freeing unused kernel memory: 5184K
[ 3.878652] Run /init as init process
[ 3.915805] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 3.920406] mmcblk0: mmc0:aaaa SE32G 29.7 GiB
[ 3.933723] mmcblk0: p1 p2
[ 3.939803] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[ 4.598286] qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy
[ 4.598901] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 4.602337] qcom-pcie 1c00000.pci: 1c00000.pci supply vdda not found, using dummy regulator
[ 4.603133] qcom-qmp-phy 1da7000.phy: 1da7000.phy supply vdda-phy not found, using dummy regulator
[ 4.603301] qcom-qmp-phy 1da7000.phy: 1da7000.phy supply vdda-pll not found, using dummy regulator
[ 4.603783] qcom-qmp-phy 1da7000.phy: Registered Qcom-QMP phy
[ 4.604882] qcom-qmp-phy c010000.phy: Registered Qcom-QMP phy
[ 4.605346] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 4.608932] qcom-pcie 1c00000.pci: 1c00000.pci supply vddpe-3v3 not found, using dummy regulator
[ 4.612522] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 4.613150] qcom-qusb2-phy c012000.phy: Registered Qcom-QUSB2 phy
[ 4.635677] i2c_hid 0-003a: 0-003a supply vdd not found, using dummy regulator
[ 4.639563] ufshcd-qcom 1da4000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 4.643709] i2c_hid 0-003a: 0-003a supply vddl not found, using dummy regulator
[ 4.651882] qcom-qmp-phy 1c06000.phy: phy initialization timed-out
[ 4.656723] phy phy-1c06000.phy.0: phy init failed --> -110
[ 4.658103] random: fast init done
[ 4.661167] qcom-pcie: probe of 1c00000.pci failed with error -110
[ 4.665977] scsi host0: ufshcd
[ 4.671075] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[ 4.687298] qcom-qmp-phy 1da7000.phy: phy initialization timed-out
[ 4.688740] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.698834] input: hid-over-i2c 04F3:0400 Keyboard as /devices/platform/soc/c17a000.i2c/i2c-0/0-003a/0018:04F3:0400.0001/input/input0
[ 4.700059] input: hid-over-i2c 04F3:0400 Consumer Control as /devices/platform/soc/c17a000.i2c/i2c-0/0-003a/0018:04F3:0400.0001/input/input1
[ 4.701640] phy phy-1da7000.phy.1: phy poweron failed --> -110
[ 4.701649] ufshcd-qcom 1da4000.ufshc: ufs_qcom_power_up_sequence: phy power on failed, ret = -110
[ 4.703464] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.703620] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
[ 4.716471] input: hid-over-i2c 04F3:0400 Wireless Radio Control as /devices/platform/soc/c17a000.i2c/i2c-0/0-003a/0018:04F3:0400.0001/input/input2
[ 4.720485] xhci-hcd xhci-hcd.0.auto: irq 56, io mem 0x0a800000
[ 4.734477] input: hid-over-i2c 04F3:0400 Mouse as /devices/platform/soc/c17a000.i2c/i2c-0/0-003a/0018:04F3:0400.0001/input/input3
[ 4.738482] hub 1-0:1.0: USB hub found
[ 4.751520] input: hid-over-i2c 04F3:0400 Touchpad as /devices/platform/soc/c17a000.i2c/i2c-0/0-003a/0018:04F3:0400.0001/input/input5
[ 4.754437] ufshcd-qcom 1da4000.ufshc: Controller enable failed
[ 4.754441] ufshcd-qcom 1da4000.ufshc: Host controller enable failed
[ 4.754469] host_regs: 00000000: 1587001f 00000000 00000210 00000000
[ 4.754473] host_regs: 00000010: 01000000 00010217 00000000 00000000
[ 4.754476] host_regs: 00000020: 00000000 00000000 00000000 00000000
[ 4.754480] host_regs: 00000030: 00000008 00000000 00000000 00000000
[ 4.754483] host_regs: 00000040: 00000000 00000000 00000000 00000000
[ 4.754486] host_regs: 00000050: 00000000 00000000 00000000 00000000
[ 4.754489] host_regs: 00000060: 00000000 00000000 00000000 00000000
[ 4.754493] host_regs: 00000070: 00000000 00000000 00000000 00000000
[ 4.754496] host_regs: 00000080: 00000000 00000000 00000000 00000000
[ 4.754499] host_regs: 00000090: 00000000 00000001 00000000 00000000
[ 4.754504] ufshcd-qcom 1da4000.ufshc: hba->ufs_version = 0x210, hba->capabilities = 0x1587001f
[ 4.754507] ufshcd-qcom 1da4000.ufshc: hba->outstanding_reqs = 0x0, hba->outstanding_tasks = 0x0
[ 4.754511] ufshcd-qcom 1da4000.ufshc: last_hibern8_exit_tstamp at 0 us, hibern8_exit_cnt = 0
[ 4.754514] ufshcd-qcom 1da4000.ufshc: No record of pa_err errors
[ 4.754517] ufshcd-qcom 1da4000.ufshc: No record of dl_err errors
[ 4.754521] ufshcd-qcom 1da4000.ufshc: No record of nl_err errors
[ 4.754524] ufshcd-qcom 1da4000.ufshc: No record of tl_err errors
[ 4.754527] ufshcd-qcom 1da4000.ufshc: No record of dme_err errors
[ 4.754530] ufshcd-qcom 1da4000.ufshc: No record of auto_hibern8_err errors
[ 4.754533] ufshcd-qcom 1da4000.ufshc: No record of fatal_err errors
[ 4.754536] ufshcd-qcom 1da4000.ufshc: No record of link_startup_fail errors
[ 4.754540] ufshcd-qcom 1da4000.ufshc: No record of resume_fail errors
[ 4.754543] ufshcd-qcom 1da4000.ufshc: No record of suspend_fail errors
[ 4.754546] ufshcd-qcom 1da4000.ufshc: No record of dev_reset errors
[ 4.754549] ufshcd-qcom 1da4000.ufshc: No record of host_reset errors
[ 4.754553] ufshcd-qcom 1da4000.ufshc: No record of task_abort errors
[ 4.754557] ufshcd-qcom 1da4000.ufshc: clk: core_clk, rate: 200000000
[ 4.754560] ufshcd-qcom 1da4000.ufshc: clk: core_clk_unipro, rate: 150000000
[ 4.754575] HCI Vendor Specific Registers 00000000: 000000c8 00000000 00000000 00000000
[ 4.754579] HCI Vendor Specific Registers 00000010: 00000000 00000000 00000001 1c00052e
[ 4.754582] HCI Vendor Specific Registers 00000020: 3f011300 30010000 00000000 00000000
[ 4.754585] HCI Vendor Specific Registers 00000030: 00000000 00000000 00000000 00000000
[ 4.754613] UFS_UFS_DBG_RD_REG_OCSC 00000000: 00000000 00000000 00000000 00000000
[ 4.754616] UFS_UFS_DBG_RD_REG_OCSC 00000010: 00000000 00000000 00000000 00000000
[ 4.754620] UFS_UFS_DBG_RD_REG_OCSC 00000020: 00000000 00000000 00000000 00000000
[ 4.754623] UFS_UFS_DBG_RD_REG_OCSC 00000030: 00000000 00000000 00000000 00000000
[ 4.754626] UFS_UFS_DBG_RD_REG_OCSC 00000040: 00000000 00000000 00000000 00000000
[ 4.754629] UFS_UFS_DBG_RD_REG_OCSC 00000050: 00000000 00000000 00000000 00000000
[ 4.754633] UFS_UFS_DBG_RD_REG_OCSC 00000060: 00000000 00000000 00000000 00000000
[ 4.754636] UFS_UFS_DBG_RD_REG_OCSC 00000070: 00000000 00000000 00000000 00000000
[ 4.754639] UFS_UFS_DBG_RD_REG_OCSC 00000080: 00000000 00000000 00000000 00000000
[ 4.754643] UFS_UFS_DBG_RD_REG_OCSC 00000090: 00000000 00000000 00000000 00000000
[ 4.754646] UFS_UFS_DBG_RD_REG_OCSC 000000a0: 00000000 00000000 00000000 00000000
[ 4.754668] UFS_UFS_DBG_RD_EDTL_RAM 00000000: 00000000 00000000 00000000 00000000
[ 4.754671] UFS_UFS_DBG_RD_EDTL_RAM 00000010: 00000000 00000000 00000000 00000000
[ 4.754674] UFS_UFS_DBG_RD_EDTL_RAM 00000020: 00000000 00000000 00000000 00000000
[ 4.754678] UFS_UFS_DBG_RD_EDTL_RAM 00000030: 00000000 00000000 00000000 00000000
[ 4.754681] UFS_UFS_DBG_RD_EDTL_RAM 00000040: 00000000 00000000 00000000 00000000
[ 4.754684] UFS_UFS_DBG_RD_EDTL_RAM 00000050: 00000000 00000000 00000000 00000000
[ 4.754687] UFS_UFS_DBG_RD_EDTL_RAM 00000060: 00000000 00000000 00000000 00000000
[ 4.754691] UFS_UFS_DBG_RD_EDTL_RAM 00000070: 00000000 00000000 00000000 00000000
[ 4.754762] UFS_UFS_DBG_RD_DESC_RAM 00000000: 00000000 00000000 00000000 00000000
[ 4.754765] UFS_UFS_DBG_RD_DESC_RAM 00000010: 00000000 00000000 00000000 00000000
[ 4.754769] UFS_UFS_DBG_RD_DESC_RAM 00000020: 00000000 00000000 00000000 00000000
[ 4.754772] UFS_UFS_DBG_RD_DESC_RAM 00000030: 00000000 00000000 00000000 00000000
[ 4.754775] UFS_UFS_DBG_RD_DESC_RAM 00000040: 00000000 00000000 00000000 00000000
[ 4.754778] UFS_UFS_DBG_RD_DESC_RAM 00000050: 00000000 00000000 00000000 00000000
[ 4.754782] UFS_UFS_DBG_RD_DESC_RAM 00000060: 00000000 00000000 00000000 00000000
[ 4.754785] UFS_UFS_DBG_RD_DESC_RAM 00000070: 00000000 00000000 00000000 00000000
[ 4.754789] UFS_UFS_DBG_RD_DESC_RAM 00000080: 00000000 00000000 00000000 00000000
[ 4.754792] UFS_UFS_DBG_RD_DESC_RAM 00000090: 00000000 00000000 00000000 00000000
[ 4.754795] UFS_UFS_DBG_RD_DESC_RAM 000000a0: 00000000 00000000 00000000 00000000
[ 4.754798] UFS_UFS_DBG_RD_DESC_RAM 000000b0: 00000000 00000000 00000000 00000000
[ 4.754802] UFS_UFS_DBG_RD_DESC_RAM 000000c0: 00000000 00000000 00000000 00000000
[ 4.754805] UFS_UFS_DBG_RD_DESC_RAM 000000d0: 00000000 00000000 00000000 00000000
[ 4.754808] UFS_UFS_DBG_RD_DESC_RAM 000000e0: 00000000 00000000 00000000 00000000
[ 4.754812] UFS_UFS_DBG_RD_DESC_RAM 000000f0: 00000000 00000000 00000000 00000000
[ 4.754815] UFS_UFS_DBG_RD_DESC_RAM 00000100: 00000000 00000000 00000000 00000000
[ 4.754818] UFS_UFS_DBG_RD_DESC_RAM 00000110: 00000000 00000000 00000000 00000000
[ 4.754821] UFS_UFS_DBG_RD_DESC_RAM 00000120: 00000000 00000000 00000000 00000000
[ 4.754825] UFS_UFS_DBG_RD_DESC_RAM 00000130: 00000000 00000000 00000000 00000000
[ 4.754828] UFS_UFS_DBG_RD_DESC_RAM 00000140: 00000000 00000000 00000000 00000000
[ 4.754831] UFS_UFS_DBG_RD_DESC_RAM 00000150: 00000000 00000000 00000000 00000000
[ 4.754835] UFS_UFS_DBG_RD_DESC_RAM 00000160: 00000000 00000000 00000000 00000000
[ 4.754838] UFS_UFS_DBG_RD_DESC_RAM 00000170: 00000000 00000000 00000000 00000000
[ 4.754841] UFS_UFS_DBG_RD_DESC_RAM 00000180: 00000000 00000000 00000000 00000000
[ 4.754844] UFS_UFS_DBG_RD_DESC_RAM 00000190: 00000000 00000000 00000000 00000000
[ 4.754848] UFS_UFS_DBG_RD_DESC_RAM 000001a0: 00000000 00000000 00000000 00000000
[ 4.754851] UFS_UFS_DBG_RD_DESC_RAM 000001b0: 00000000 00000000 00000000 00000000
[ 4.754854] UFS_UFS_DBG_RD_DESC_RAM 000001c0: 00000000 00000000 00000000 00000000
[ 4.754857] UFS_UFS_DBG_RD_DESC_RAM 000001d0: 00000000 00000000 00000000 00000000
[ 4.754861] UFS_UFS_DBG_RD_DESC_RAM 000001e0: 00000000 00000000 00000000 00000000
[ 4.754864] UFS_UFS_DBG_RD_DESC_RAM 000001f0: 00000000 00000000 00000000 00000000
[ 4.754903] UFS_UFS_DBG_RD_PRDT_RAM 00000000: 00000000 00000000 00000000 00000000
[ 4.754906] UFS_UFS_DBG_RD_PRDT_RAM 00000010: 00000000 00000000 00000000 00000000
[ 4.754909] UFS_UFS_DBG_RD_PRDT_RAM 00000020: 00000000 00000000 00000000 00000000
[ 4.754913] UFS_UFS_DBG_RD_PRDT_RAM 00000030: 00000000 00000000 00000000 00000000
[ 4.754916] UFS_UFS_DBG_RD_PRDT_RAM 00000040: 00000000 00000000 00000000 00000000
[ 4.754919] UFS_UFS_DBG_RD_PRDT_RAM 00000050: 00000000 00000000 00000000 00000000
[ 4.754922] UFS_UFS_DBG_RD_PRDT_RAM 00000060: 00000000 00000000 00000000 00000000
[ 4.754926] UFS_UFS_DBG_RD_PRDT_RAM 00000070: 00000000 00000000 00000000 00000000
[ 4.754929] UFS_UFS_DBG_RD_PRDT_RAM 00000080: 00000000 00000000 00000000 00000000
[ 4.754932] UFS_UFS_DBG_RD_PRDT_RAM 00000090: 00000000 00000000 00000000 00000000
[ 4.754936] UFS_UFS_DBG_RD_PRDT_RAM 000000a0: 00000000 00000000 00000000 00000000
[ 4.754939] UFS_UFS_DBG_RD_PRDT_RAM 000000b0: 00000000 00000000 00000000 00000000
[ 4.754942] UFS_UFS_DBG_RD_PRDT_RAM 000000c0: 00000000 00000000 00000000 00000000
[ 4.754945] UFS_UFS_DBG_RD_PRDT_RAM 000000d0: 00000000 00000000 00000000 00000000
[ 4.754949] UFS_UFS_DBG_RD_PRDT_RAM 000000e0: 00000000 00000000 00000000 00000000
[ 4.754952] UFS_UFS_DBG_RD_PRDT_RAM 000000f0: 00000000 00000000 00000000 00000000
[ 4.754960] UFS_DBG_RD_REG_UAWM 00000000: 00000000 00000000 00000000 00000000
[ 4.754966] UFS_DBG_RD_REG_UARM 00000000: 00000000 00000000 00000000 00000000
[ 4.754995] UFS_DBG_RD_REG_TXUC 00000000: 00000000 00000000 00000000 00000000
[ 4.754998] UFS_DBG_RD_REG_TXUC 00000010: 00000000 00000000 00000000 00000000
[ 4.755001] UFS_DBG_RD_REG_TXUC 00000020: 00000000 00000000 00000000 00000000
[ 4.755005] UFS_DBG_RD_REG_TXUC 00000030: 00000000 00000000 00000000 00000000
[ 4.755008] UFS_DBG_RD_REG_TXUC 00000040: 00000000 00000000 00000000 00000000
[ 4.755011] UFS_DBG_RD_REG_TXUC 00000050: 00000000 00000000 00000000 00000000
[ 4.755014] UFS_DBG_RD_REG_TXUC 00000060: 00000000 00000000 00000000 00000000
[ 4.755018] UFS_DBG_RD_REG_TXUC 00000070: 00000000 00000000 00000000 00000000
[ 4.755021] UFS_DBG_RD_REG_TXUC 00000080: 00000000 00000000 00000000 00000000
[ 4.755024] UFS_DBG_RD_REG_TXUC 00000090: 00000000 00000000 00000000 00000000
[ 4.755027] UFS_DBG_RD_REG_TXUC 000000a0: 00000000 00000000 00000000 00000000
[ 4.755031] UFS_DBG_RD_REG_TXUC 000000b0: 00000000 00000000 00000000 00000000
[ 4.755050] UFS_DBG_RD_REG_RXUC 00000000: 00000000 00000000 00000000 00000000
[ 4.755053] UFS_DBG_RD_REG_RXUC 00000010: 00000000 00000000 00000000 00000000
[ 4.755056] UFS_DBG_RD_REG_RXUC 00000020: 00000000 00000000 00000000 00000000
[ 4.755060] UFS_DBG_RD_REG_RXUC 00000030: 00000000 00000000 00000000 00000000
[ 4.755063] UFS_DBG_RD_REG_RXUC 00000040: 00000000 00000000 00000000 00000000
[ 4.755066] UFS_DBG_RD_REG_RXUC 00000050: 00000000 00000000 00000000 00000000
[ 4.755069] UFS_DBG_RD_REG_RXUC 00000060: 00000000 00000000 00000000
[ 4.755083] UFS_DBG_RD_REG_DFC 00000000: 00000000 00000000 00000000 00000000
[ 4.755086] UFS_DBG_RD_REG_DFC 00000010: 00000000 00000000 00000000 00000000
[ 4.755090] UFS_DBG_RD_REG_DFC 00000020: 00000000 00000000 00000000 00000000
[ 4.755093] UFS_DBG_RD_REG_DFC 00000030: 00000000 00000000 00000000 00000000
[ 4.755096] UFS_DBG_RD_REG_DFC 00000040: 00000000 00000000 00000000
[ 4.755117] UFS_DBG_RD_REG_TRLUT 00000000: 00000000 00000000 00000000 00000000
[ 4.755121] UFS_DBG_RD_REG_TRLUT 00000010: 00000000 00000000 00000000 00000000
[ 4.755124] UFS_DBG_RD_REG_TRLUT 00000020: 00000000 00000000 00000000 00000000
[ 4.755127] UFS_DBG_RD_REG_TRLUT 00000030: 00000000 00000000 00000000 00000000
[ 4.755130] UFS_DBG_RD_REG_TRLUT 00000040: 00000000 00000000 00000000 00000000
[ 4.755134] UFS_DBG_RD_REG_TRLUT 00000050: 00000000 00000000 00000000 00000000
[ 4.755137] UFS_DBG_RD_REG_TRLUT 00000060: 00000000 00000000 00000000 00000000
[ 4.755140] UFS_DBG_RD_REG_TRLUT 00000070: 00000000 00000000 00000000 00000000
[ 4.755143] UFS_DBG_RD_REG_TRLUT 00000080: 00000000 00000000
[ 4.755152] UFS_DBG_RD_REG_TMRLUT 00000000: 00000000 00000000 00000000 00000000
[ 4.755155] UFS_DBG_RD_REG_TMRLUT 00000010: 00000000 00000000 00000000 00000000
[ 4.755157] UFS_DBG_RD_REG_TMRLUT 00000020: 00000000
[ 4.755788] hub 1-0:1.0: 1 port detected
[ 4.755998] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.756271] UFS_TEST_BUS 00000000
[ 4.758775] UNIPRO_TEST_BUS 00000000: 00000000 00000000 00000000 00000000
[ 4.758779] UNIPRO_TEST_BUS 00000010: 00000000 00000000 00000000 00000000
[ 4.758782] UNIPRO_TEST_BUS 00000020: 00000000 00000000 00000000 00000000
[ 4.758785] UNIPRO_TEST_BUS 00000030: 00000000 00000000 00000000 00000000
[ 4.758788] UNIPRO_TEST_BUS 00000040: 00000000 00000000 00000000 00000000
[ 4.758791] UNIPRO_TEST_BUS 00000050: 00000000 00000000 00000000 00000000
[ 4.758794] UNIPRO_TEST_BUS 00000060: 00000000 00000000 00000000 00000000
[ 4.758797] UNIPRO_TEST_BUS 00000070: 00000000 00000000 00000000 00000000
[ 4.758801] UNIPRO_TEST_BUS 00000080: 00000000 00000000 00000000 00000000
[ 4.758804] UNIPRO_TEST_BUS 00000090: 00000000 00000000 00000000 00000000
[ 4.758807] UNIPRO_TEST_BUS 000000a0: 00000000 00000000 00000000 00000000
[ 4.758810] UNIPRO_TEST_BUS 000000b0: 00000000 00000000 00000000 00000000
[ 4.758813] UNIPRO_TEST_BUS 000000c0: 00000000 00000000 00000000 00000000
[ 4.758816] UNIPRO_TEST_BUS 000000d0: 00000000 00000000 00000000 00000000
[ 4.758820] UNIPRO_TEST_BUS 000000e0: 00000000 00000000 00000000 00000000
[ 4.758823] UNIPRO_TEST_BUS 000000f0: 00000000 00000000 00000000 00000000
[ 4.758826] UNIPRO_TEST_BUS 00000100: 00000000 00000000 00000000 00000000
[ 4.758829] UNIPRO_TEST_BUS 00000110: 00000000 00000000 00000000 00000000
[ 4.758832] UNIPRO_TEST_BUS 00000120: 00000000 00000000 00000000 00000000
[ 4.758835] UNIPRO_TEST_BUS 00000130: 00000000 00000000 00000000 00000000
[ 4.758839] UNIPRO_TEST_BUS 00000140: 00000000 00000000 00000000 00000000
[ 4.758842] UNIPRO_TEST_BUS 00000150: 00000000 00000000 00000000 00000000
[ 4.758845] UNIPRO_TEST_BUS 00000160: 00000000 00000000 00000000 00000000
[ 4.758848] UNIPRO_TEST_BUS 00000170: 00000000 00000000 00000000 00000000
[ 4.758851] UNIPRO_TEST_BUS 00000180: 00000000 00000000 00000000 00000000
[ 4.758854] UNIPRO_TEST_BUS 00000190: 00000000 00000000 00000000 00000000
[ 4.758857] UNIPRO_TEST_BUS 000001a0: 00000000 00000000 00000000 00000000
[ 4.758861] UNIPRO_TEST_BUS 000001b0: 00000000 00000000 00000000 00000000
[ 4.758864] UNIPRO_TEST_BUS 000001c0: 00000000 00000000 00000000 00000000
[ 4.758867] UNIPRO_TEST_BUS 000001d0: 00000000 00000000 00000000 00000000
[ 4.758870] UNIPRO_TEST_BUS 000001e0: 00000000 00000000 00000000 00000000
[ 4.758873] UNIPRO_TEST_BUS 000001f0: 00000000 00000000 00000000 00000000
[ 4.758876] UNIPRO_TEST_BUS 00000200: 00000000 00000000 00000000 00000000
[ 4.758879] UNIPRO_TEST_BUS 00000210: 00000000 00000000 00000000 00000000
[ 4.758883] UNIPRO_TEST_BUS 00000220: 00000000 00000000 00000000 00000000
[ 4.758886] UNIPRO_TEST_BUS 00000230: 00000000 00000000 00000000 00000000
[ 4.758889] UNIPRO_TEST_BUS 00000240: 00000000 00000000 00000000 00000000
[ 4.758892] UNIPRO_TEST_BUS 00000250: 00000000 00000000 00000000 00000000
[ 4.758895] UNIPRO_TEST_BUS 00000260: 00000000 00000000 00000000 00000000
[ 4.758898] UNIPRO_TEST_BUS 00000270: 00000000 00000000 00000000 00000000
[ 4.758901] UNIPRO_TEST_BUS 00000280: 00000000 00000000 00000000 00000000
[ 4.758905] UNIPRO_TEST_BUS 00000290: 00000000 00000000 00000000 00000000
[ 4.758908] UNIPRO_TEST_BUS 000002a0: 00000000 00000000 00000000 00000000
[ 4.758911] UNIPRO_TEST_BUS 000002b0: 00000000 00000000 00000000 00000000
[ 4.758914] UNIPRO_TEST_BUS 000002c0: 00000000 00000000 00000000 00000000
[ 4.758917] UNIPRO_TEST_BUS 000002d0: 00000000 00000000 00000000 00000000
[ 4.758920] UNIPRO_TEST_BUS 000002e0: 00000000 00000000 00000000 00000000
[ 4.758923] UNIPRO_TEST_BUS 000002f0: 00000000 00000000 00000000 00000000
[ 4.758926] UNIPRO_TEST_BUS 00000300: 00000000 00000000 00000000 00000000
[ 4.758930] UNIPRO_TEST_BUS 00000310: 00000000 00000000 00000000 00000000
[ 4.758933] UNIPRO_TEST_BUS 00000320: 00000000 00000000 00000000 00000000
[ 4.758936] UNIPRO_TEST_BUS 00000330: 00000000 00000000 00000000 00000000
[ 4.758939] UNIPRO_TEST_BUS 00000340: 00000000 00000000 00000000 00000000
[ 4.758942] UNIPRO_TEST_BUS 00000350: 00000000 00000000 00000000 00000000
[ 4.758945] UNIPRO_TEST_BUS 00000360: 00000000 00000000 00000000 00000000
[ 4.758948] UNIPRO_TEST_BUS 00000370: 00000000 00000000 00000000 00000000
[ 4.758952] UNIPRO_TEST_BUS 00000380: 00000000 00000000 00000000 00000000
[ 4.758955] UNIPRO_TEST_BUS 00000390: 00000000 00000000 00000000 00000000
[ 4.758958] UNIPRO_TEST_BUS 000003a0: 00000000 00000000 00000000 00000000
[ 4.758961] UNIPRO_TEST_BUS 000003b0: 00000000 00000000 00000000 00000000
[ 4.758964] UNIPRO_TEST_BUS 000003c0: 00000000 00000000 00000000 00000000
[ 4.758967] UNIPRO_TEST_BUS 000003d0: 00000000 00000000 00000000 00000000
[ 4.758970] UNIPRO_TEST_BUS 000003e0: 00000000 00000000 00000000 00000000
[ 4.758974] UNIPRO_TEST_BUS 000003f0: 00000000 00000000 00000000 00000000
[ 4.760087] ufshcd-qcom 1da4000.ufshc: UFS Host state=0
[ 4.760091] ufshcd-qcom 1da4000.ufshc: lrb in use=0x0, outstanding reqs=0x0 tasks=0x0
[ 4.760095] ufshcd-qcom 1da4000.ufshc: saved_err=0x0, saved_uic_err=0x0
[ 4.760098] ufshcd-qcom 1da4000.ufshc: Device power mode=0, UIC link state=0
[ 4.760101] ufshcd-qcom 1da4000.ufshc: PM in progress=0, sys. suspended=0
[ 4.760104] ufshcd-qcom 1da4000.ufshc: Auto BKOPS=0, Host self-block=0
[ 4.760107] ufshcd-qcom 1da4000.ufshc: Clk gate=1
[ 4.760110] ufshcd-qcom 1da4000.ufshc: error handling flags=0x0, req. abort count=0
[ 4.760113] ufshcd-qcom 1da4000.ufshc: Host capabilities=0x1587001f, caps=0xf
[ 4.760116] ufshcd-qcom 1da4000.ufshc: quirks=0x0, dev. quirks=0x0
[ 4.761007] ufshcd-qcom 1da4000.ufshc: Initialization failed
[ 4.769802] hid-generic 0018:04F3:0400.0001: input: I2C HID v1.00 Keyboard [hid-over-i2c 04F3:0400] on 0-003a
[ 4.774384] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.774396] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.774445] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.774991] hub 2-0:1.0: USB hub found
[ 5.090531] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 5.093425] hub 2-0:1.0: 1 port detected
[ 5.099329] ufshcd-qcom 1da4000.ufshc: ufshcd_pltfrm_init() failed -5
[ 5.279185] ufshcd-qcom: probe of 1da4000.ufshc failed with error -5
[ 5.415282] hub 1-1:1.0: USB hub found
[ 5.417674] hub 1-1:1.0: 4 ports detected
[ 5.510743] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 5.639544] hub 2-1:1.0: USB hub found
[ 5.645748] hub 2-1:1.0: 4 ports detected
[ 6.190442] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[ 6.406883] hub 1-1.1:1.0: USB hub found
[ 6.409267] hub 1-1.1:1.0: 4 ports detected
[ 6.430919] usb 2-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[ 6.456113] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[ 6.459830] scsi host0: usb-storage 2-1.4:1.0
[ 6.586345] usb 1-1.2: new high-speed USB device number 4 using xhci-hcd
[ 6.922539] usb 1-1.1.2: new high-speed USB device number 5 using xhci-hcd
[ 6.958439] raid6: neonx8 gen() 825 MB/s
[ 7.030390] raid6: neonx8 xor() 677 MB/s
[ 7.102402] raid6: neonx4 gen() 884 MB/s
[ 7.178757] raid6: neonx4 xor() 748 MB/s
[ 7.216137] hid-generic 0003:2109:D101.0002: device has no listeners, quitting
[ 7.254422] raid6: neonx2 gen() 642 MB/s
[ 7.330862] raid6: neonx2 xor() 633 MB/s
[ 7.406286] raid6: neonx1 gen() 472 MB/s
[ 7.482262] raid6: neonx1 xor() 442 MB/s
[ 7.495968] scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
[ 7.558264] raid6: int64x8 gen() 388 MB/s
[ 7.634221] raid6: int64x8 xor() 215 MB/s
[ 7.710346] raid6: int64x4 gen() 393 MB/s
[ 7.748772] sd 0:0:0:0: [sda] 122552320 512-byte logical blocks: (62.7 GB/58.4 GiB)
[ 7.752796] sd 0:0:0:0: [sda] Write Protect is off
[ 7.756304] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[ 7.760343] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7.786280] raid6: int64x4 xor() 227 MB/s
[ 7.862382] raid6: int64x2 gen() 347 MB/s
[ 7.938285] raid6: int64x2 xor() 204 MB/s
[ 8.014387] raid6: int64x1 gen() 289 MB/s
[ 8.090368] raid6: int64x1 xor() 163 MB/s
[ 8.100395] raid6: using algorithm neonx4 gen() 884 MB/s
[ 8.110785] raid6: .... xor() 748 MB/s, rmw enabled
[ 8.121004] sda: sda1 sda2
[ 8.121054] raid6: using neon recovery algorithm
[ 8.128446] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.146696] xor: measuring software checksum speed
[ 8.194221] 8regs : 1021.000 MB/sec
[ 8.242218] 32regs : 1185.000 MB/sec
[ 8.290565] arm64_neon: 962.000 MB/sec
[ 8.301584] xor: using function: 32regs (1185.000 MB/sec)
[ 8.404812] Btrfs loaded, crc32c=crc32c-generic
[ 8.772275] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.426284] systemd[1]: System time before build time, advancing clock.
[ 9.555696] NET: Registered protocol family 10
[ 9.570483] Segment Routing with IPv6
[ 9.616081] efivars: get_next_variable: status=8000000000000003
[ 9.654342] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 9.683471] systemd[1]: Detected architecture arm64.
[ 9.774402] systemd[1]: Set hostname to <8998mtp>.
[ 9.799640] systemd[1]: Couldn't move remaining userspace processes, ignoring: Input/output error
[ 10.326610] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 10.332170] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 10.478988] systemd[1]: Configuration file /usr/local/lib/systemd/system/qrtr-ns.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 10.624682] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.630762] systemd[1]: Listening on Journal Socket.
[ 10.642473] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.648319] systemd[1]: Listening on udev Kernel Socket.
[ 10.659869] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.665808] systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.783973] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 11.070227] Adding 312700k swap on /swapfile. Priority:-2 extents:2 across:320892k
[ 11.114678] random: crng init done
[ 11.130807] random: 7 urandom warning(s) missed due to ratelimiting
[ 11.224764] systemd-journald[520]: Received request to flush runtime journal from PID 1
[ 11.253062] systemd-journald[520]: File /var/log/journal/b5ff3368aa8b4fde8d460a2dcdaec32c/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 12.142343] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.164502] NET: Registered protocol family 42
[ 12.173218] remoteproc remoteproc0: 4080000.remoteproc is available
[ 12.183935] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.345490] ath10k_snoc 18800000.wifi: Adding to iommu group 0
[ 12.920693] asix 1-1.2:1.0 eth0: register 'asix' at usb-xhci-hcd.0.auto-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0b:c9:33
[ 12.926562] usbcore: registered new interface driver asix
[ 12.948568] asix 1-1.2:1.0 enx0050b60bc933: renamed from eth0
[ 14.054443] remoteproc remoteproc0: powering up 4080000.remoteproc
[ 14.149989] remoteproc remoteproc0: Booting fw image qcom/LENOVO/81F1/qcdsp1v28998.mbn, size 230056
[ 15.532360] IPv6: ADDRCONF(NETDEV_CHANGE): enx0050b60bc933: link becomes ready
[ 15.548608] asix 1-1.2:1.0 enx0050b60bc933: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 15.762278] qcom-q6v5-mss 4080000.remoteproc: MBA booted, loading mpss
[ 16.893719] remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
