Re: [PATCH v5 2/7] scsi: ufs-qcom: Add reset control support for host controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Can,

On 14-11-19, 22:09, Can Guo wrote:
> Add reset control for host controller so that host controller can be reset
> as required in its power up sequence.

I am seeing a regression on UFS on SM8150-mtp with this patch. I think
Jeff is seeing same one lenove laptop on 8998.

845 does not seem to have this issue and only thing I can see is that on
sm8150 and 8998 we define reset as:

                        resets = <&gcc GCC_UFS_BCR>;
                        reset-names = "rst";

Thanks

> 
> Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
> ---
>  drivers/scsi/ufs/ufs-qcom.c | 53 +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/scsi/ufs/ufs-qcom.h |  3 +++
>  2 files changed, 56 insertions(+)
> 
> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
> index a5b7148..c69c29a1c 100644
> --- a/drivers/scsi/ufs/ufs-qcom.c
> +++ b/drivers/scsi/ufs/ufs-qcom.c
> @@ -246,6 +246,44 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
>  	mb();
>  }
>  
> +/**
> + * ufs_qcom_host_reset - reset host controller and PHY
> + */
> +static int ufs_qcom_host_reset(struct ufs_hba *hba)
> +{
> +	int ret = 0;
> +	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +
> +	if (!host->core_reset) {
> +		dev_warn(hba->dev, "%s: reset control not set\n", __func__);
> +		goto out;
> +	}
> +
> +	ret = reset_control_assert(host->core_reset);
> +	if (ret) {
> +		dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n",
> +				 __func__, ret);
> +		goto out;
> +	}
> +
> +	/*
> +	 * The hardware requirement for delay between assert/deassert
> +	 * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
> +	 * ~125us (4/32768). To be on the safe side add 200us delay.
> +	 */
> +	usleep_range(200, 210);
> +
> +	ret = reset_control_deassert(host->core_reset);
> +	if (ret)
> +		dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n",
> +				 __func__, ret);
> +
> +	usleep_range(1000, 1100);
> +
> +out:
> +	return ret;
> +}
> +
>  static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
>  {
>  	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> @@ -254,6 +292,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
>  	bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B)
>  							? true : false;
>  
> +	/* Reset UFS Host Controller and PHY */
> +	ret = ufs_qcom_host_reset(hba);
> +	if (ret)
> +		dev_warn(hba->dev, "%s: host reset returned %d\n",
> +				  __func__, ret);
> +
>  	if (is_rate_B)
>  		phy_set_mode(phy, PHY_MODE_UFS_HS_B);
>  
> @@ -1101,6 +1145,15 @@ static int ufs_qcom_init(struct ufs_hba *hba)
>  	host->hba = hba;
>  	ufshcd_set_variant(hba, host);
>  
> +	/* Setup the reset control of HCI */
> +	host->core_reset = devm_reset_control_get(hba->dev, "rst");
> +	if (IS_ERR(host->core_reset)) {
> +		err = PTR_ERR(host->core_reset);
> +		dev_warn(dev, "Failed to get reset control %d\n", err);
> +		host->core_reset = NULL;
> +		err = 0;
> +	}
> +
>  	/* Fire up the reset controller. Failure here is non-fatal. */
>  	host->rcdev.of_node = dev->of_node;
>  	host->rcdev.ops = &ufs_qcom_reset_ops;
> diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
> index d401f17..2d95e7c 100644
> --- a/drivers/scsi/ufs/ufs-qcom.h
> +++ b/drivers/scsi/ufs/ufs-qcom.h
> @@ -6,6 +6,7 @@
>  #define UFS_QCOM_H_
>  
>  #include <linux/reset-controller.h>
> +#include <linux/reset.h>
>  
>  #define MAX_UFS_QCOM_HOSTS	1
>  #define MAX_U32                 (~(u32)0)
> @@ -233,6 +234,8 @@ struct ufs_qcom_host {
>  	u32 dbg_print_en;
>  	struct ufs_qcom_testbus testbus;
>  
> +	/* Reset control of HCI */
> +	struct reset_control *core_reset;
>  	struct reset_controller_dev rcdev;
>  
>  	struct gpio_desc *device_reset;
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

-- 
~Vinod



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux