Il giorno ven, 15/09/2006 alle 19.26 +0530, G Shyam Sundar ha scritto: > Which version of the driver are you using ? > Also, what is the version of the firmware ? You can get the version of > fimware by > # grep FW_VERSION_STRING in the source directory. > > It will be helpful if you could recompile the driver with > QL_DEBUG_LEVEL_2 enabled (qla_dbg.h) and recreate the issue. I used two versions of the driver. The first one is shipped with the standard kernel from suse: 8.01.04-k (from modinfo). the second one is from the latest driver I could download from sourceforge.net (project linux-qla2xxx) and is version 8.01.06b2 (from modinfo). The new version emit some more information: qla2xxx_conf: module not supported by Novell, setting U taint flag. qla2xxx: module not supported by Novell, setting U taint flag. QLogic Fibre Channel HBA Driver qla2300: module not supported by Novell, setting U taint flag. ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 177 qla2300 0000:03:02.0: Found an ISP2312, irq 177, iobase 0xffffc20000f70000 qla2300 0000:03:02.0: Configuring PCI space... qla2300 0000:03:02.0: Configure NVRAM parameters... qla2300 0000:03:02.0: Verifying loaded RISC code... qla2300 0000:03:02.0: Mailbox command timeout occured. Scheduling ISP abort. qla2300 0000:03:02.0: [ERROR] Failed to load segment 0 of firmware Mailbox registers: scsi(7): mbox 0 0x4000 scsi(7): mbox 1 0xaaaa scsi(7): mbox 2 0x5555 scsi(7): mbox 3 0xaa55 scsi(7): mbox 4 0x55aa scsi(7): mbox 5 0xa5a5 qla2300 0000:03:02.0: Failed to initialize adapter qla2300: probe of 0000:03:02.0 failed with error -1 About FW_VERSION_STRING: lnx01:/usr/src/linux/drivers/scsi/qla2xxx # grep FW_V * ql2100_fw.c:#define FW_VERSION_STRING "1.19.25" ql2200_fw.c:#define FW_VERSION_STRING "2.02.08" ql2300_fw.c:#define FW_VERSION_STRING "3.03.18" ql2322_fw.c:#define FW_VERSION_STRING "3.03.18" ql2400_fw.c:#define FW_VERSION_STRING "4.00.16" ql6312_fw.c:#define FW_VERSION_STRING "3.03.18" lnx01:/usr/src/linux/drivers/scsi/qla2xxx # Thanks, Giuseppe - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
