Which version of the driver are you using ? Also, what is the version of the firmware ? You can get the version of fimware by # grep FW_VERSION_STRING in the source directory. It will be helpful if you could recompile the driver with QL_DEBUG_LEVEL_2 enabled (qla_dbg.h) and recreate the issue. -Shyam On 9/15/06, Giuseppe Sacco <giuseppe.sacco@xxxxxxxxx> wrote:
Hi all, I installed a new machine with this SCSI controller 03:02.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02) The problem is that firmware cannot be loaded on this board. When loading the qla2xxx driver, I get these messages: QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 177 qla2xxx 0000:03:02.0: Found an ISP2312, irq 177, iobase 0xffffc20000f70000 qla2xxx 0000:03:02.0: Configuring PCI space... qla2xxx 0000:03:02.0: Configure NVRAM parameters... qla2xxx 0000:03:02.0: Verifying loaded RISC code... qla2xxx 0000:03:02.0: Mailbox command timeout occured. Scheduling ISP abort. qla2xxx 0000:03:02.0: [ERROR] Failed to load segment 0 of firmware qla2xxx 0000:03:02.0: Failed to initialize adapter Trying to free free IRQ177 Browsing the archives of linux-scsi I found a solution[1]: a patch missing from the suse linux kernel. Sadly this was about an old versione of the kernel, while the current one already include it. I am using kernel 2.6.16.21. Any idea about what the problem could be? Thanks, Giuseppe [1]http://www.spinics.net/lists/linux-scsi/msg06713.html - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
