Hi Finn, Am 01.11.2016 um 12:47 schrieb Finn Thain: > > On Tue, 1 Nov 2016, Michael Schmitz wrote: > >>> I had tried to set that bit in zorro_esp_slave_configure but had not >>> done a proper job of it - I'd only set esp->config3 and forgot to set >>> tp->esp_config3. Time to retest this ... >> >> I don't think it's quite that easy - the ESP_CONFIG3_TENB bit needs to >> be set for all targets if at least one SCSI-2 target is on the bus and >> we allow dosconnecting, no? > > I think ESP_CONFIG3_TENB is for FAS100A and FASHME. The bug here is on > ESP236 and FAS236, so ESP_CONFIG3_TBMS would be the relevant bit. I stand corrected. Err... confused. When setting ESP_CONFIG3_TBMS, should we set ESP_CONFIG3_GTM as well? > The bit gets set when ESP_CONFIG2_SCSI2ENAB gets set (as in David's > patch) so we then need to avoid clobbering it, since ESP_CONFIG3_TBMS == > ESP_CONFIG3_EWIDE. I think we have to test for HME to avoid this clash. I'd want to set these bits for ESP236 and FAS236 only, so no clash with HME. As you found out, ESP_CONFIG3_TBMS aka ESP_CONFIG3_EWIDE gets clobbered on bus reset cleanup unconditionally. Cheers, Michael -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
