On Tue, 1 Nov 2016, Michael Schmitz wrote: > > I had tried to set that bit in zorro_esp_slave_configure but had not > > done a proper job of it - I'd only set esp->config3 and forgot to set > > tp->esp_config3. Time to retest this ... > > I don't think it's quite that easy - the ESP_CONFIG3_TENB bit needs to > be set for all targets if at least one SCSI-2 target is on the bus and > we allow dosconnecting, no? I think ESP_CONFIG3_TENB is for FAS100A and FASHME. The bug here is on ESP236 and FAS236, so ESP_CONFIG3_TBMS would be the relevant bit. The bit gets set when ESP_CONFIG2_SCSI2ENAB gets set (as in David's patch) so we then need to avoid clobbering it, since ESP_CONFIG3_TBMS == ESP_CONFIG3_EWIDE. I think we have to test for HME to avoid this clash. -- > > Adrian - any chance I can get access to elgar again for some more testing? > > Cheers, > > Michael -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
