On Sun 19 Feb 21:54 CET 2006, Guennadi Liakhovetski wrote: > 2) your problem might be in hardware rather than in software. For the > latter I have to ask you if your cables are ok? Termination? Maybe > replace the cable? Do you have any other SCSI card where you also could > test your scanner? The scanner works OK when connected to my old AHA1542 controller in my old computer. The two SCSI controllers have different connectors, so the cable I'm using now is also new, and untested. It could, no doubt, be a problem with either the cable or the SCSI controller hardware. > After you confirm that your cables and termination are fine, It's fine, as far as I know. It's a brand new cable and I just plugged it in replacing the old cable. Do you have any suggestions as to how I could test cable and termination? > I would ask you to do a few more tests to look more exactly at what's > happening, and to verify at least the non-sg path of my patch. So, would > you agree to help me further with the tests or would you rather or would > you prefer to stop now? Of course I'd like to help out. (How else would Linux continue to improve?) Just tell me what you want me to do. Cheers // Fredrik Roubert -- Sörbyplan 5 | +46 8 7609169 / +46 708 776974 SE-163 71 Spånga | http://www.df.lth.se/~roubert/ - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
