I think, it is better to keep linux-scsi in CC, if you don't mind. On Tue, 14 Feb 2006, Fredrik Roubert wrote: > Feb 14 01:55:12 skalman kernel: dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 > Feb 14 01:55:12 skalman kernel: ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 19 > Feb 14 01:55:12 skalman kernel: dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x57 > Feb 14 01:55:12 skalman kernel: dc395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s > Feb 14 01:55:12 skalman kernel: dc395x: Connectors: Termination: Auto Low High > Feb 14 01:55:12 skalman kernel: dc395x: Performing initial SCSI bus reset > Feb 14 01:55:12 skalman kernel: scsi4 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 > Feb 14 01:55:13 skalman kernel: Vendor: HP Model: C2520A Rev: 3503 > Feb 14 01:55:13 skalman kernel: Type: Processor ANSI SCSI revision: 02 > Feb 14 01:55:13 skalman kernel: 4:0:2:0: Attached scsi generic sg2 type 3 > Feb 14 01:56:11 skalman kernel: dc395x: reselect: w/o disconnected cmds <02-0> > Feb 14 01:56:11 skalman kernel: dc395x: disconnect: Unexpected reselection <02-0> > Feb 14 01:58:11 skalman kernel: dc395x: eh_abort: (pid#669) target=<02-0> cmd=ffff810009067cc0 > Feb 14 01:58:11 skalman kernel: dc395x: eh_abort: Command in progress<6>dc395x: eh_bus_reset: (pid#669) target=<02-0> cmd=ffff810009067cc0 > Feb 14 01:58:11 skalman kernel: dc395x: doing_srb_done: pids G:669(02-0) Hm, is it from /var/log/messages? Looks like your KERN_DEBUG messages do not come there. Perhaps in /var/log/kern.log or similar? Please have a look if you find them. Alternatively, I think, dmesg should also output them. Thanks Guennadi --- Guennadi Liakhovetski - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
