Re: Error using DC315U to drive ScanJet 4c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 15 Feb 23:33 CET 2006, Guennadi Liakhovetski wrote:

> Ok, I will assume that this dump includes the KERN_DEBUG messages too now.

So would I, or else the "reselect: w/o disconnected cmds" wouldn't be
there.

> Still, could you, please, just verify that you don't have anything else
> from dc395x in your /var/log/kern.log (if you have one)?

There is nothing else there, or in /var/log/debug.

> Could you, please, remove / comment out these 2 lines and try again?

OK, this is the log from loading the new module until the second failed
scan:

[49712.862170] dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08
[49712.862190] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 19
[49713.104766] dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x57
[49713.104772] dc395x:                AdaptMode=0x0f, Tags=4(16), DelayReset=1s
[49713.104778] dc395x: Connectors:  Termination: Auto Low High
[49713.080481] dc395x: Performing initial SCSI bus reset
[49713.081006] scsi3 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08
[49714.608526]   Vendor: HP        Model: C2520A            Rev: 3503
[49714.608566]   Type:   Processor                          ANSI SCSI revision: 02
[49714.608654]  3:0:2:0: Attached scsi generic sg2 type 3
[49787.196864] dc395x: reselect: w/o disconnected cmds <02-0>
[49787.196886] dc395x: disconnect: Unexpected reselection <02-0>
[49906.975135] dc395x: eh_abort: (pid#899) target=<02-0> cmd=ffff81006cbd6d40
[49906.975148] dc395x: eh_abort: Command in progress<6>dc395x: eh_bus_reset: (pid#899) target=<02-0> cmd=ffff81006cbd6d40
[49906.975675] dc395x: doing_srb_done: pids G:899(02-0)
[50083.137467] dc395x: reselect: w/o disconnected cmds <02-0>
[50083.137487] dc395x: disconnect: Unexpected reselection <02-0>
[50202.914281] dc395x: eh_abort: (pid#3210) target=<02-0> cmd=ffff81006cbd6640
[50202.914288] dc395x: eh_abort: Command in progress<6>dc395x: eh_bus_reset: (pid#3210) target=<02-0> cmd=ffff81006cbd6640
[50202.914816] dc395x: doing_srb_done: pids G:3210(02-0)

Cheers // Fredrik Roubert

-- 
Sörbyplan 5       |  +46 8 7609169 / +46 708 776974
SE-163 71 Spånga  |  http://www.df.lth.se/~roubert/
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux