On Fri, Feb 14, 2025 at 04:33:40AM +0000, Denzeel Oliva wrote: > Changes in v3: > - Reordered fifo_depth handling in s3c64xx_spi_probe() so that the DT > property takes precedence over the default value in port_config. > This allows node-specific FIFO depths to be applied correctly while > preserving a fallback. Showing evidence: [ 0.339111] s3c64xx-spi 10920000.spi: spi bus clock parent not specified, using clock at index 0 as parent [ 0.339119] s3c64xx-spi 10920000.spi: number of chip select lines not specified, assuming 1 chip select line [ 0.339467] s3c64xx-spi 10920000.spi: registered host spi0 [ 0.339589] s3c64xx-spi 10920000.spi: Samsung SoC SPI Driver loaded for Bus SPI-0 with 1 Targets attached [ 0.339597] s3c64xx-spi 10920000.spi: IOmem=[[mem 0x10920000-0x1092002f]] FIFO 256bytes ------------------------------------------------------------------------------------------------------------- [ 0.587452] s3c64xx-spi 10650000.spi: spi bus clock parent not specified, using clock at index 0 as parent [ 0.587462] s3c64xx-spi 10650000.spi: number of chip select lines not specified, assuming 1 chip select line [ 0.587847] s3c64xx-spi 10650000.spi: registered host spi1 [ 0.587986] s3c64xx-spi 10650000.spi: Samsung SoC SPI Driver loaded for Bus SPI-1 with 1 Targets attached [ 0.587997] s3c64xx-spi 10650000.spi: IOmem=[[mem 0x10650000-0x1065002f]] FIFO 64bytes
