Introduce nMUX() for MUX clocks that can be reparented on clock rate change. "nMUX" comes from "n-to-1 selector", hopefully emphasising that the selector can change on clock rate changes. Ideally MUX/MUX_F() should change to not have the CLK_SET_RATE_NO_REPARENT flag set by default, and all their users to be updated to add the flag back (like in the case of DIV and GATE). But this is a very intrusive change and because for now only GS101 allows MUX reparenting on clock rate change, stick with nMUX(). GS101 defines MUX clocks that are dedicated for each instance of the IP. One example is USI IP (SPI, I2C, serial). The reparenting of these MUX clocks will not affect other instances of the same IP or different IPs altogether. When SPI transfer is being prepared, the spi-s3c64xx driver will call clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK is a gate (leaf) clock, so it must propagate the rate change up the clock tree, so that corresponding MUX/DIV clocks can actually change their values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for all USI instances in GS101 PERIC0: USI{1-8, 14}. This change involves the following clocks: PERIC0 USI*: Clock Div range MUX Selection ------------------------------------------------------------------- gout_peric0_peric0_top0_ipclk_* - - dout_peric0_usi*_usi /1..16 - mout_peric0_usi*_usi_user - {24.5 MHz, 400 MHz} With input clock of 400 MHz this scheme provides the following IPCLK rate range, for each USI block: PERIC0 USI*: 1.5 MHz ... 400 MHz Accounting for internal /4 divider in SPI blocks, and because the max SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates: PERIC0 USI_SPI*: 384 KHz ... 49.9 MHz Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0") Reviewed-by: Peter Griffin <peter.griffin@xxxxxxxxxx> Acked-by: André Draszik <andre.draszik@xxxxxxxxxx> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx> --- drivers/clk/samsung/clk-gs101.c | 135 +++++++++++++++++--------------- drivers/clk/samsung/clk.h | 11 ++- 2 files changed, 81 insertions(+), 65 deletions(-) diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c index d065e343a85d..76d4d0fa1168 100644 --- a/drivers/clk/samsung/clk-gs101.c +++ b/drivers/clk/samsung/clk-gs101.c @@ -2763,33 +2763,33 @@ static const struct samsung_mux_clock peric0_mux_clks[] __initconst = { MUX(CLK_MOUT_PERIC0_USI0_UART_USER, "mout_peric0_usi0_uart_user", mout_peric0_usi0_uart_user_p, PLL_CON0_MUX_CLKCMU_PERIC0_USI0_UART_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI14_USI_USER, - "mout_peric0_usi14_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI14_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI1_USI_USER, - "mout_peric0_usi1_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI1_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI2_USI_USER, - "mout_peric0_usi2_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI2_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI3_USI_USER, - "mout_peric0_usi3_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI3_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI4_USI_USER, - "mout_peric0_usi4_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI4_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI5_USI_USER, - "mout_peric0_usi5_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI5_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI6_USI_USER, - "mout_peric0_usi6_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI6_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI7_USI_USER, - "mout_peric0_usi7_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI7_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC0_USI8_USI_USER, - "mout_peric0_usi8_usi_user", mout_peric0_usi_usi_user_p, - PLL_CON0_MUX_CLKCMU_PERIC0_USI8_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI14_USI_USER, + "mout_peric0_usi14_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI14_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI1_USI_USER, + "mout_peric0_usi1_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI1_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI2_USI_USER, + "mout_peric0_usi2_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI2_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI3_USI_USER, + "mout_peric0_usi3_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI3_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI4_USI_USER, + "mout_peric0_usi4_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI4_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI5_USI_USER, + "mout_peric0_usi5_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI5_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI6_USI_USER, + "mout_peric0_usi6_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI6_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI7_USI_USER, + "mout_peric0_usi7_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI7_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC0_USI8_USI_USER, + "mout_peric0_usi8_usi_user", mout_peric0_usi_usi_user_p, + PLL_CON0_MUX_CLKCMU_PERIC0_USI8_USI_USER, 4, 1), }; static const struct samsung_div_clock peric0_div_clks[] __initconst = { @@ -2798,33 +2798,42 @@ static const struct samsung_div_clock peric0_div_clks[] __initconst = { DIV(CLK_DOUT_PERIC0_USI0_UART, "dout_peric0_usi0_uart", "mout_peric0_usi0_uart_user", CLK_CON_DIV_DIV_CLK_PERIC0_USI0_UART, 0, 4), - DIV(CLK_DOUT_PERIC0_USI14_USI, - "dout_peric0_usi14_usi", "mout_peric0_usi14_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI14_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI1_USI, - "dout_peric0_usi1_usi", "mout_peric0_usi1_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI1_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI2_USI, - "dout_peric0_usi2_usi", "mout_peric0_usi2_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI2_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI3_USI, - "dout_peric0_usi3_usi", "mout_peric0_usi3_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI3_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI4_USI, - "dout_peric0_usi4_usi", "mout_peric0_usi4_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI4_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI5_USI, - "dout_peric0_usi5_usi", "mout_peric0_usi5_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI5_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI6_USI, - "dout_peric0_usi6_usi", "mout_peric0_usi6_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI6_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI7_USI, - "dout_peric0_usi7_usi", "mout_peric0_usi7_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI7_USI, 0, 4), - DIV(CLK_DOUT_PERIC0_USI8_USI, - "dout_peric0_usi8_usi", "mout_peric0_usi8_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC0_USI8_USI, 0, 4), + DIV_F(CLK_DOUT_PERIC0_USI14_USI, + "dout_peric0_usi14_usi", "mout_peric0_usi14_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI14_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI1_USI, + "dout_peric0_usi1_usi", "mout_peric0_usi1_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI1_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI2_USI, + "dout_peric0_usi2_usi", "mout_peric0_usi2_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI2_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI3_USI, + "dout_peric0_usi3_usi", "mout_peric0_usi3_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI3_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI4_USI, + "dout_peric0_usi4_usi", "mout_peric0_usi4_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI4_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI5_USI, + "dout_peric0_usi5_usi", "mout_peric0_usi5_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI5_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI6_USI, + "dout_peric0_usi6_usi", "mout_peric0_usi6_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI6_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI7_USI, + "dout_peric0_usi7_usi", "mout_peric0_usi7_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI7_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC0_USI8_USI, + "dout_peric0_usi8_usi", "mout_peric0_usi8_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC0_USI8_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), }; static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { @@ -2857,11 +2866,11 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0, "gout_peric0_peric0_top0_ipclk_0", "dout_peric0_usi1_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_0, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1, "gout_peric0_peric0_top0_ipclk_1", "dout_peric0_usi2_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_1, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_10, "gout_peric0_peric0_top0_ipclk_10", "dout_peric0_i3c", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_10, @@ -2889,27 +2898,27 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2, "gout_peric0_peric0_top0_ipclk_2", "dout_peric0_usi3_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_2, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3, "gout_peric0_peric0_top0_ipclk_3", "dout_peric0_usi4_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_3, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4, "gout_peric0_peric0_top0_ipclk_4", "dout_peric0_usi5_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_4, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5, "gout_peric0_peric0_top0_ipclk_5", "dout_peric0_usi6_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_5, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6, "gout_peric0_peric0_top0_ipclk_6", "dout_peric0_usi7_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_6, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7, "gout_peric0_peric0_top0_ipclk_7", "dout_peric0_usi8_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_7, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_8, "gout_peric0_peric0_top0_ipclk_8", "dout_peric0_i3c", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_IPCLK_8, @@ -2990,7 +2999,7 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { GATE(CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2, "gout_peric0_peric0_top1_ipclk_2", "dout_peric0_usi14_usi", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP1_IPCLKPORT_IPCLK_2, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), /* Disabling this clock makes the system hang. Mark the clock as critical. */ GATE(CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0, "gout_peric0_peric0_top1_pclk_0", "mout_peric0_bus_user", diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h index a70bd7cce39f..fb06caa71f0a 100644 --- a/drivers/clk/samsung/clk.h +++ b/drivers/clk/samsung/clk.h @@ -133,7 +133,7 @@ struct samsung_mux_clock { .name = cname, \ .parent_names = pnames, \ .num_parents = ARRAY_SIZE(pnames), \ - .flags = (f) | CLK_SET_RATE_NO_REPARENT, \ + .flags = f, \ .offset = o, \ .shift = s, \ .width = w, \ @@ -141,9 +141,16 @@ struct samsung_mux_clock { } #define MUX(_id, cname, pnames, o, s, w) \ - __MUX(_id, cname, pnames, o, s, w, 0, 0) + __MUX(_id, cname, pnames, o, s, w, CLK_SET_RATE_NO_REPARENT, 0) #define MUX_F(_id, cname, pnames, o, s, w, f, mf) \ + __MUX(_id, cname, pnames, o, s, w, (f) | CLK_SET_RATE_NO_REPARENT, mf) + +/* Used by MUX clocks where reparenting on clock rate change is allowed. */ +#define nMUX(_id, cname, pnames, o, s, w) \ + __MUX(_id, cname, pnames, o, s, w, 0, 0) + +#define nMUX_F(_id, cname, pnames, o, s, w, f, mf) \ __MUX(_id, cname, pnames, o, s, w, f, mf) /** -- 2.44.0.769.g3c40516874-goog