Remove extra spaces and fix spelling mistakes in 'drivers/
clk/samsung/clk-cpu.c' and 'drivers/clk/samsung/clk-cpu.h'
Signed-off-by: Varada Pavani <v.pavani@xxxxxxxxxxx>
---
drivers/clk/samsung/clk-cpu.c | 6 +++---
drivers/clk/samsung/clk-cpu.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
index 3e62ade120c5..18568b8b1b9b 100644
--- a/drivers/clk/samsung/clk-cpu.c
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -19,7 +19,7 @@
* clock and the corresponding rate changes of the auxillary clocks of the CPU
* domain. The platform clock driver provides a clock register configuration
* for each configurable rate which is then used to program the clock hardware
- * registers to acheive a fast co-oridinated rate change for all the CPU domain
+ * registers to achieve a fast co-oridinated rate change for all the CPU domain
* clocks.
*
* On a rate change request for the CPU clock, the rate change is propagated
@@ -181,7 +181,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
* If the old parent clock speed is less than the clock speed of
* the alternate parent, then it should be ensured that at no point
* the armclk speed is more than the old_prate until the dividers are
- * set. Also workaround the issue of the dividers being set to lower
+ * set. Also workaround the issue of the dividers being set to lower
* values before the parent clock speed is set to new lower speed
* (this can result in too high speed of armclk output clocks).
*/
@@ -303,7 +303,7 @@ static int exynos5433_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
* If the old parent clock speed is less than the clock speed of
* the alternate parent, then it should be ensured that at no point
* the armclk speed is more than the old_prate until the dividers are
- * set. Also workaround the issue of the dividers being set to lower
+ * set. Also workaround the issue of the dividers being set to lower
* values before the parent clock speed is set to new lower speed
* (this can result in too high speed of armclk output clocks).
*/
diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h
index fc9f67a3b22e..e0a1651174e6 100644
--- a/drivers/clk/samsung/clk-cpu.h
+++ b/drivers/clk/samsung/clk-cpu.h
@@ -33,7 +33,7 @@ struct exynos_cpuclk_cfg_data {
* @hw: handle between CCF and CPU clock.
* @alt_parent: alternate parent clock to use when switching the speed
* of the primary parent clock.
- * @ctrl_base: base address of the clock controller.
+ * @ctrl_base: base address of the clock controller.
* @lock: cpu clock domain register access lock.
* @cfg: cpu clock rate configuration data.
* @num_cfgs: number of array elements in @cfg array.
--
2.17.1
