[PATCH 03/10] PCI: tegra: Remove dev_err() when handing an error from platform_get_irq()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq()
or platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.

This change is as per suggestion from Coccinelle:

  drivers/pci/controller/pci-tegra.c:1524:2-9: line 1524 is redundant
  because platform_get_irq() already prints an error

  drivers/pci/controller/pci-tegra.c:1742:2-9: line 1742 is redundant
  because platform_get_irq() already prints an error

Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Krzysztof Wilczyński <kw@xxxxxxxxx>
---
 drivers/pci/controller/pci-tegra.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 235b456698fc..b11397475a4d 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -1520,10 +1520,8 @@ static int tegra_pcie_get_resources(struct tegra_pcie *pcie)
 
 	/* request interrupt */
 	err = platform_get_irq_byname(pdev, "intr");
-	if (err < 0) {
-		dev_err(dev, "failed to get IRQ: %d\n", err);
+	if (err < 0)
 		goto phys_put;
-	}
 
 	pcie->irq = err;
 
@@ -1738,10 +1736,8 @@ static int tegra_pcie_msi_setup(struct tegra_pcie *pcie)
 	}
 
 	err = platform_get_irq_byname(pdev, "msi");
-	if (err < 0) {
-		dev_err(dev, "failed to get IRQ: %d\n", err);
+	if (err < 0)
 		goto free_irq_domain;
-	}
 
 	msi->irq = err;
 
-- 
2.27.0




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux