Hi Rob,
On 4/25/19 9:51 PM, Rob Herring wrote:
> On Fri, Apr 19, 2019 at 04:19:22PM +0200, Lukasz Luba wrote:
>> The device tree bindings for LPDDR3 SDRAM memories.
>>
>> For specifying the AC timing parameters of the memory device
>> the 'lpddr3' binding uses binding 'lpddr2-timings'.
>>
>> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/lpddr3/lpddr3-timings.txt | 57 +++++++++++++
>> .../devicetree/bindings/lpddr3/lpddr3.txt | 93 ++++++++++++++++++++++
>
> Please rename the lpddr2 directory to 'ddr' and add these to it.
OK, I will rename it in the nex patch set.
>
> Maybe whatever properties are common should be put in a common doc.
There are maybe a few common properties, but I would not dare to merge
lpddr2 and lpddr3 before consulting it with TI engineers who made
LPDDR2 support.
Could we work on a common file after the patch set got merged?
>
>> 2 files changed, 150 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
>> create mode 100644 Documentation/devicetree/bindings/lpddr3/lpddr3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt b/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
>> new file mode 100644
>> index 0000000..ebf3e00
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
>> @@ -0,0 +1,57 @@
>> +* AC timing parameters of LPDDR3 memories for a given speed-bin.
>> +* The structures are based on LPDDR2 and extended where needed.
>> +
>> +Required properties:
>> +- compatible : Should be "jedec,lpddr3-timings"
>> +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
>> +- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
>> +
>> +Optional properties:
>> +
>> +The following properties represent AC timing parameters from the memory
>> +data-sheet of the device for a given speed-bin. All these properties are
>> +of type <u32> and the default unit is ps (pico seconds).
>> +- tRFC
>> +- tRRD
>> +- tRPab
>> +- tRPpb
>> +- tRCD
>> +- tRC
>> +- tRAS
>> +- tWTR
>> +- tWR
>> +- tRTP
>> +- tW2W-C2C
>> +- tR2R-C2C
>> +- tFAW
>> +- tXSR
>> +- tXP
>> +- tCKE
>> +- tCKESR
>> +- tMRD
>> +
>> +Example:
>> +
>> +timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {
>
> Since the lpddr2 version was written, we've gotten stricter about
> allowing unit-address without reg property. Perhaps 'reg' should be the
> max-freq instead.
OK, so I will rename 'max-freq' to 'reg' and add a comment with:
'/* workaround: it shows max-freq */
Does it make sense?
>
>> + compatible = "jedec,lpddr3-timings";
>> + min-freq = <100000000>;
>> + max-freq = <800000000>;
>> + tRFC = <65000>;
>> + tRRD = <6000>;
>> + tRPab = <12000>;
>> + tRPpb = <12000>;
>> + tRCD = <10000>;
>> + tRC = <33750>;
>> + tRAS = <23000>;
>> + tWTR = <3750>;
>> + tWR = <7500>;
>> + tRTP = <3750>;
>> + tW2W-C2C = <0>;
>> + tR2R-C2C = <0>;
>> + tFAW = <25000>;
>> + tXSR = <70000>;
>> + tXP = <3750>;
>> + tCKE = <3750>;
>> + tCKESR = <3750>;
>> + tMRD = <7000>;
>> +};
>> diff --git a/Documentation/devicetree/bindings/lpddr3/lpddr3.txt b/Documentation/devicetree/bindings/lpddr3/lpddr3.txt
>> new file mode 100644
>> index 0000000..fc7875c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/lpddr3/lpddr3.txt
>> @@ -0,0 +1,93 @@
>> +* LPDDR3 SDRAM memories compliant to JEDEC JESD209-2
>
> That's an LPDDR2 spec.
Right, should be JESD209-3C.
Thank you for the review.
Regards,
Lukasz
>
>> +
>> +Required properties:
>> +- compatible : Should be - "jedec,lpddr3"
>> +- density : <u32> representing density in Mb (Mega bits)
>> +- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
>> +
>> +Optional properties:
>> +
>> +The following optional properties represent the minimum value of some AC
>> +timing parameters of the DDR device in terms of number of clock cycles.
>> +These values shall be obtained from the device data-sheet.
>> +- tRFC-min-tck
>> +- tRRD-min-tck
>> +- tRPab-min-tck
>> +- tRPpb-min-tck
>> +- tRCD-min-tck
>> +- tRC-min-tck
>> +- tRAS-min-tck
>> +- tWTR-min-tck
>> +- tWR-min-tck
>> +- tRTP-min-tck
>> +- tW2W-C2C-min-tck
>> +- tR2R-C2C-min-tck
>> +- tWL-min-tck
>> +- tDQSCK-min-tck
>> +- tRL-min-tck
>> +- tFAW-min-tck
>> +- tXSR-min-tck
>> +- tXP-min-tck
>> +- tCKE-min-tck
>> +- tCKESR-min-tck
>> +- tMRD-min-tck
>> +
>> +Child nodes:
>> +- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
>> + "lpddr3-timings" provides AC timing parameters of the device for
>> + a given speed-bin. Please see Documentation/devicetree/
>> + bindings/lpddr3/lpddr3-timings.txt for more information on "lpddr3-timings"
>> +
>> +Example:
>> +
>> +samsung_K3QF2F20DB: lpddr3 {
>> + compatible = "Samsung,K3QF2F20DB","jedec,lpddr3";
>> + density = <16384>;
>> + io-width = <32>;
>> +
>> + tRFC-min-tck = <17>;
>> + tRRD-min-tck = <2>;
>> + tRPab-min-tck = <2>;
>> + tRPpb-min-tck = <2>;
>> + tRCD-min-tck = <3>;
>> + tRC-min-tck = <6>;
>> + tRAS-min-tck = <5>;
>> + tWTR-min-tck = <2>;
>> + tWR-min-tck = <7>;
>> + tRTP-min-tck = <2>;
>> + tW2W-C2C-min-tck = <0>;
>> + tR2R-C2C-min-tck = <0>;
>> + tWL-min-tck = <8>;
>> + tDQSCK-min-tck = <5>;
>> + tRL-min-tck = <14>;
>> + tFAW-min-tck = <5>;
>> + tXSR-min-tck = <12>;
>> + tXP-min-tck = <2>;
>> + tCKE-min-tck = <2>;
>> + tCKESR-min-tck = <2>;
>> + tMRD-min-tck = <5>;
>> +
>> + timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {
>> + compatible = "jedec,lpddr3-timings";
>> + min-freq = <100000000>;
>> + max-freq = <800000000>;
>> + tRFC = <65000>;
>> + tRRD = <6000>;
>> + tRPab = <12000>;
>> + tRPpb = <12000>;
>> + tRCD = <10000>;
>> + tRC = <33750>;
>> + tRAS = <23000>;
>> + tWTR = <3750>;
>> + tWR = <7500>;
>> + tRTP = <3750>;
>> + tW2W-C2C = <0>;
>> + tR2R-C2C = <0>;
>> + tFAW = <25000>;
>> + tXSR = <70000>;
>> + tXP = <3750>;
>> + tCKE = <3750>;
>> + tCKESR = <3750>;
>> + tMRD = <7000>;
>> + };
>> +}
>> --
>> 2.7.4
>>
>
>
