Re: [PATCH v6 04/10] Documentation: dt: device tree bindings for LPDDR3 memories

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 19, 2019 at 04:19:22PM +0200, Lukasz Luba wrote:
> The device tree bindings for LPDDR3 SDRAM memories.
> 
> For specifying the AC timing parameters of the memory device
> the 'lpddr3' binding uses binding 'lpddr2-timings'.
> 
> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/lpddr3/lpddr3-timings.txt  | 57 +++++++++++++
>  .../devicetree/bindings/lpddr3/lpddr3.txt          | 93 ++++++++++++++++++++++

Please rename the lpddr2 directory to 'ddr' and add these to it.

Maybe whatever properties are common should be put in a common doc.

>  2 files changed, 150 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
>  create mode 100644 Documentation/devicetree/bindings/lpddr3/lpddr3.txt
> 
> diff --git a/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt b/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
> new file mode 100644
> index 0000000..ebf3e00
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/lpddr3/lpddr3-timings.txt
> @@ -0,0 +1,57 @@
> +* AC timing parameters of LPDDR3 memories for a given speed-bin.
> +* The structures are based on LPDDR2 and extended where needed.
> +
> +Required properties:
> +- compatible : Should be "jedec,lpddr3-timings"
> +- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
> +- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
> +
> +Optional properties:
> +
> +The following properties represent AC timing parameters from the memory
> +data-sheet of the device for a given speed-bin. All these properties are
> +of type <u32> and the default unit is ps (pico seconds).
> +- tRFC
> +- tRRD
> +- tRPab
> +- tRPpb
> +- tRCD
> +- tRC
> +- tRAS
> +- tWTR
> +- tWR
> +- tRTP
> +- tW2W-C2C
> +- tR2R-C2C
> +- tFAW
> +- tXSR
> +- tXP
> +- tCKE
> +- tCKESR
> +- tMRD
> +
> +Example:
> +
> +timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {

Since the lpddr2 version was written, we've gotten stricter about 
allowing unit-address without reg property. Perhaps 'reg' should be the 
max-freq instead.

> +	compatible	= "jedec,lpddr3-timings";
> +	min-freq	= <100000000>;
> +	max-freq	= <800000000>;
> +	tRFC		= <65000>;
> +	tRRD		= <6000>;
> +	tRPab		= <12000>;
> +	tRPpb		= <12000>;
> +	tRCD		= <10000>;
> +	tRC		= <33750>;
> +	tRAS		= <23000>;
> +	tWTR		= <3750>;
> +	tWR		= <7500>;
> +	tRTP		= <3750>;
> +	tW2W-C2C	= <0>;
> +	tR2R-C2C	= <0>;
> +	tFAW		= <25000>;
> +	tXSR		= <70000>;
> +	tXP		= <3750>;
> +	tCKE		= <3750>;
> +	tCKESR		= <3750>;
> +	tMRD		= <7000>;
> +};
> diff --git a/Documentation/devicetree/bindings/lpddr3/lpddr3.txt b/Documentation/devicetree/bindings/lpddr3/lpddr3.txt
> new file mode 100644
> index 0000000..fc7875c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/lpddr3/lpddr3.txt
> @@ -0,0 +1,93 @@
> +* LPDDR3 SDRAM memories compliant to JEDEC JESD209-2

That's an LPDDR2 spec.

> +
> +Required properties:
> +- compatible : Should be  - "jedec,lpddr3"
> +- density  : <u32> representing density in Mb (Mega bits)
> +- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
> +
> +Optional properties:
> +
> +The following optional properties represent the minimum value of some AC
> +timing parameters of the DDR device in terms of number of clock cycles.
> +These values shall be obtained from the device data-sheet.
> +- tRFC-min-tck
> +- tRRD-min-tck
> +- tRPab-min-tck
> +- tRPpb-min-tck
> +- tRCD-min-tck
> +- tRC-min-tck
> +- tRAS-min-tck
> +- tWTR-min-tck
> +- tWR-min-tck
> +- tRTP-min-tck
> +- tW2W-C2C-min-tck
> +- tR2R-C2C-min-tck
> +- tWL-min-tck
> +- tDQSCK-min-tck
> +- tRL-min-tck
> +- tFAW-min-tck
> +- tXSR-min-tck
> +- tXP-min-tck
> +- tCKE-min-tck
> +- tCKESR-min-tck
> +- tMRD-min-tck
> +
> +Child nodes:
> +- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
> +  "lpddr3-timings" provides AC timing parameters of the device for
> +  a given speed-bin. Please see Documentation/devicetree/
> +  bindings/lpddr3/lpddr3-timings.txt for more information on "lpddr3-timings"
> +
> +Example:
> +
> +samsung_K3QF2F20DB: lpddr3 {
> +	compatible	= "Samsung,K3QF2F20DB","jedec,lpddr3";
> +	density		= <16384>;
> +	io-width	= <32>;
> +
> +	tRFC-min-tck		= <17>;
> +	tRRD-min-tck		= <2>;
> +	tRPab-min-tck		= <2>;
> +	tRPpb-min-tck		= <2>;
> +	tRCD-min-tck		= <3>;
> +	tRC-min-tck		= <6>;
> +	tRAS-min-tck		= <5>;
> +	tWTR-min-tck		= <2>;
> +	tWR-min-tck		= <7>;
> +	tRTP-min-tck		= <2>;
> +	tW2W-C2C-min-tck	= <0>;
> +	tR2R-C2C-min-tck	= <0>;
> +	tWL-min-tck		= <8>;
> +	tDQSCK-min-tck		= <5>;
> +	tRL-min-tck		= <14>;
> +	tFAW-min-tck		= <5>;
> +	tXSR-min-tck		= <12>;
> +	tXP-min-tck		= <2>;
> +	tCKE-min-tck		= <2>;
> +	tCKESR-min-tck		= <2>;
> +	tMRD-min-tck		= <5>;
> +
> +	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@0 {
> +		compatible	= "jedec,lpddr3-timings";
> +		min-freq	= <100000000>;
> +		max-freq	= <800000000>;
> +		tRFC		= <65000>;
> +		tRRD		= <6000>;
> +		tRPab		= <12000>;
> +		tRPpb		= <12000>;
> +		tRCD		= <10000>;
> +		tRC		= <33750>;
> +		tRAS		= <23000>;
> +		tWTR		= <3750>;
> +		tWR		= <7500>;
> +		tRTP		= <3750>;
> +		tW2W-C2C	= <0>;
> +		tR2R-C2C	= <0>;
> +		tFAW		= <25000>;
> +		tXSR		= <70000>;
> +		tXP		= <3750>;
> +		tCKE		= <3750>;
> +		tCKESR		= <3750>;
> +		tMRD		= <7000>;
> +	};
> +}
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux