Hi,
On 2018년 11월 23일 18:44, Anand Moon wrote:
> From: Marian Mihailescu <mihailescu2m@xxxxxxxxx>
>
> A specific clock rate table is added for VPLL so it is possible
> to set frequency of the VPLL output clock that used by the g3d clock.
>
> Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Marian Mihailescu <mihailescu2m@xxxxxxxxx>
> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> ---
> drivers/clk/samsung/clk-exynos5420.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 34cce3c5898f..34156bdfd0d2 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -1303,6 +1303,18 @@ static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = {
> PLL_36XX_RATE(24 * MHZ, 32768001U, 131, 3, 5, 4719),
> };
>
> +static const struct samsung_pll_rate_table exynos5420_vpll_24mhz_tbl[] __initconst = {
> + PLL_35XX_RATE(24 * MHZ, 600000000U, 200, 2, 2),
> + PLL_35XX_RATE(24 * MHZ, 543000000U, 181, 2, 2),
> + PLL_35XX_RATE(24 * MHZ, 533000000U, 533, 6, 2),
> + PLL_35XX_RATE(24 * MHZ, 480000000U, 320, 4, 2),
> + PLL_35XX_RATE(24 * MHZ, 420000000U, 140, 2, 2),
> + PLL_35XX_RATE(24 * MHZ, 350000000U, 175, 3, 2),
> + PLL_35XX_RATE(24 * MHZ, 266000000U, 266, 3, 3),
> + PLL_35XX_RATE(24 * MHZ, 177000000U, 118, 2, 3),
> + PLL_35XX_RATE(24 * MHZ, 100000000U, 200, 3, 4),
> +};
VPLL has the same PMS table with apll/kpll/bpll. You don't need to add new
'exynos5420_vpll_24mhz_tbl' table. Just adding the missing frequency entries
to 'exynos5420_pll2550x_24mhz_tbl' table.
> +
> static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
> [apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
> APLL_CON0, NULL),
> @@ -1428,6 +1440,7 @@ static void __init exynos5x_clk_init(struct device_node *np,
> exynos5x_plls[epll].rate_table = exynos5420_epll_24mhz_tbl;
> exynos5x_plls[kpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> exynos5x_plls[bpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> + exynos5x_plls[vpll].rate_table = exynos5420_vpll_24mhz_tbl;
> }
>
> samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
