On Fri, Aug 11, 2017 at 02:49:35PM +0200, Marek Szyprowski wrote:
> Hi Laurent,
>
> On 2017-08-11 11:40, Laurent Pinchart wrote:
> > Hi Marek,
> >
> > On Friday 11 Aug 2017 08:39:31 Marek Szyprowski wrote:
> > > On 2017-08-10 15:39, Laurent Pinchart wrote:
> > > > On Thursday 10 Aug 2017 15:25:29 Maciej Purski wrote:
> > > > > The driver should be switched on if an external connector is plugged and
> > > > > switched off if it is unplugged. Extcon is optional. If it is not found,
> > > > > the driver stays in "always-on" mode.
> > > > >
> > > > > Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
> > > > > ---
> > > > >
> > > > > .../bindings/display/bridge/sil-sii8620.txt | 4 ++
> > > > > drivers/gpu/drm/bridge/sil-sii8620.c | 83 ++++++++++++++-
> > > > > 2 files changed, 85 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git
> > > > > a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
> > > > > b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt index
> > > > > 9409d9c..1f230bf 100644
> > > > > --- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
> > > > > +++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
> > > > > @@ -10,6 +10,9 @@ Required properties:
> > > > > - clocks, clock-names: specification and name of "xtal" clock
> > > > > - video interfaces: Device node can contain video interface port
> > > > > node for HDMI encoder according to [1].
> > > > >
> > > > > +Optional properties:
> > > > > + - extcon: phandle to external connector for MHL cable changes
> > > > > + detection
> > > > The sii8620 DT node should model its connection to the MHL connector using
> > > > OF graph, connecting a port to the MHL connector DT node through
> > > > endpoints. I believe the extcon property should then be added to the MHL
> > > > connector DT node, not the bridge.
> > > I don't get this. Generic extcon bindings doesn't define connector DT
> > > node, so I don't see how could we use endpoint DT approach here. Could you
> > > give the example?
> > Sure, here you are.
> >
> > &hsi2c_7 {
> > ...
> >
> > sii8620@39 {
> > reg = <0x39>;
> > compatible = "sil,sii8620";
> > cvcc10-supply = <&ldo36_reg>;
> > iovcc18-supply = <&ldo34_reg>;
> > interrupt-parent = <&gpf0>;
> > interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> > reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
> > clocks = <&pmu_system_controller 0>;
> > clock-names = "xtal";
> >
> > ports {
> > #address-cells = <1>;
> > #size-cells = <0>;
> >
> > port@0 {
> > reg = <0>;
> > mhl_to_hdmi: endpoint {
> > remote-endpoint = <&hdmi_to_mhl>;
> > };
> > };
> > port@1 {
> > reg = <1>;
> > mhl_bridge_out: endpoint {
> > remote-endpoint = <&mhl_connector_in>;
> > };
> > };
> > };
> > };
> > };
> >
> > / {
> > mhl-connector {
> > compatible = "mhl-connector";
> > extcon = <&muic>;
> >
> > port {
> > mhl_connector_in: endpoint {
> > remote-endpoint = <&mhl_bridge_out>;
> > };
> > };
> > };
> > };
> >
> > Note that there's currently no DT binding for MHL connectors. One needs to be
> > developed, the HDMI connector DT binding can be used as a source of
> > inspiration.
>
> Ah, I see. I wasn't aware that display subsystem has bindings even for the
> connectors.
> Other types of connectors already used together with extcon in device tree
> (like usb
> and chargers) don't have dedicated bindings.
I NAK any extcon binding additions because it is poorly designed, so
don't use extcon. It is full of Linuxisms and needs work. USB
connectors need to be described like what we have for display related
connectors especially since they are merging.
>
> Do we need to add hdmi-connectors to all existing boards that have HDMI
> module?
Ideally, yes.
Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
