Hi Maciej,
Thank you for the patch.
On Thursday 10 Aug 2017 15:25:29 Maciej Purski wrote:
> The driver should be switched on if an external connector is plugged and
> switched off if it is unplugged. Extcon is optional. If it is not found,
> the driver stays in "always-on" mode.
>
> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
> ---
> .../bindings/display/bridge/sil-sii8620.txt | 4 ++
> drivers/gpu/drm/bridge/sil-sii8620.c | 83 ++++++++++++++++++-
> 2 files changed, 85 insertions(+), 2 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
> b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt index
> 9409d9c..1f230bf 100644
> --- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
> @@ -10,6 +10,9 @@ Required properties:
> - clocks, clock-names: specification and name of "xtal" clock
> - video interfaces: Device node can contain video interface port
> node for HDMI encoder according to [1].
> +Optional properties:
> + - extcon: phandle to external connector for MHL cable changes
> + detection
The sii8620 DT node should model its connection to the MHL connector using OF
graph, connecting a port to the MHL connector DT node through endpoints. I
believe the extcon property should then be added to the MHL connector DT node,
not the bridge.
> [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
>
> @@ -24,6 +27,7 @@ Example:
> reset-gpio = <&gpv7 0 0>;
> clocks = <&pmu_system_controller 0>;
> clock-names = "xtal";
> + extcon = <&muic>;
>
> port {
> mhl_to_hdmi: endpoint {
> diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c
> b/drivers/gpu/drm/bridge/sil-sii8620.c index 2d51a22..5002654 100644
> --- a/drivers/gpu/drm/bridge/sil-sii8620.c
> +++ b/drivers/gpu/drm/bridge/sil-sii8620.c
> @@ -17,6 +17,7 @@
>
> #include <linux/clk.h>
> #include <linux/delay.h>
> +#include <linux/extcon.h>
> #include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> @@ -78,6 +79,10 @@ struct sii8620 {
> struct edid *edid;
> unsigned int gen2_write_burst:1;
> enum sii8620_mt_state mt_state;
> + struct extcon_dev *extcon;
> + struct notifier_block extcon_nb;
> + struct work_struct extcon_wq;
> + bool extcon_attached;
> struct list_head mt_queue;
> struct {
> int r_size;
> @@ -2102,6 +2107,72 @@ static void sii8620_cable_in(struct sii8620 *ctx)
> enable_irq(to_i2c_client(ctx->dev)->irq);
> }
>
> +static void sii8620_cable_out(struct sii8620 *ctx)
> +{
> + disable_irq(to_i2c_client(ctx->dev)->irq);
> + sii8620_hw_off(ctx);
> +}
> +
> +static void sii8620_extcon_work(struct work_struct *work)
> +{
> + struct sii8620 *ctx =
> + container_of(work, struct sii8620, extcon_wq);
> +
> + if (ctx->extcon_attached)
> + sii8620_cable_in(ctx);
> + else
> + sii8620_cable_out(ctx);
> +}
> +
> +static int sii8620_extcon_notifier(struct notifier_block *self,
> + unsigned long event, void *ptr)
> +{
> + struct sii8620 *ctx =
> + container_of(self, struct sii8620, extcon_nb);
> +
> + ctx->extcon_attached = event;
> + schedule_work(&ctx->extcon_wq);
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int sii8620_extcon_init(struct sii8620 *ctx)
> +{
> + struct extcon_dev *edev;
> + int ret;
> +
> + INIT_WORK(&ctx->extcon_wq, sii8620_extcon_work);
> +
> + if (!of_property_read_bool(ctx->dev->of_node, "extcon")) {
> + dev_info(ctx->dev, "no extcon found, switching to 'always on'
mode\n");
> + ctx->extcon_attached = true;
> + return 0;
> + }
> +
> + edev = extcon_get_edev_by_phandle(ctx->dev, 0);
> + if (IS_ERR(edev)) {
> + if (PTR_ERR(edev) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + dev_err(ctx->dev, "Invalid or missing extcon\n");
> + return PTR_ERR(edev);
> + }
> +
> + ctx->extcon_attached = extcon_get_cable_state_(edev, EXTCON_DISP_MHL);
> + dev_info(ctx->dev, "extcon(MHL) = %d\n", ctx->extcon_attached);
> +
> + ctx->extcon = edev;
> + ctx->extcon_nb.notifier_call = sii8620_extcon_notifier;
> + ret = devm_extcon_register_notifier(ctx->dev, edev,
> + EXTCON_DISP_MHL, &ctx->extcon_nb);
> +
> + if (ret) {
> + dev_err(ctx->dev, "failed to register notifier for MHL\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
> {
> return container_of(bridge, struct sii8620, bridge);
> @@ -2201,13 +2272,20 @@ static int sii8620_probe(struct i2c_client *client,
> if (ret)
> return ret;
>
> + ret = sii8620_extcon_init(ctx);
> + if (ret < 0) {
> + dev_err(ctx->dev, "failed to initialize EXTCON\n");
> + return ret;
> + }
> +
> i2c_set_clientdata(client, ctx);
>
> ctx->bridge.funcs = &sii8620_bridge_funcs;
> ctx->bridge.of_node = dev->of_node;
> drm_bridge_add(&ctx->bridge);
>
> - sii8620_cable_in(ctx);
> + if (ctx->extcon_attached)
> + sii8620_cable_in(ctx);
>
> return 0;
> }
> @@ -2216,7 +2294,8 @@ static int sii8620_remove(struct i2c_client *client)
> {
> struct sii8620 *ctx = i2c_get_clientdata(client);
>
> - disable_irq(to_i2c_client(ctx->dev)->irq);
> + if (!ctx->extcon_attached)
> + sii8620_cable_out(ctx);
> drm_bridge_remove(&ctx->bridge);
> sii8620_hw_off(ctx);
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
