Re: [PATCH v2 03/19] ARM: dts: Add DMC bus node for Exynos3250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10.12.2015 11:00, Chanwoo Choi wrote:
> On 2015년 12월 10일 10:20, Krzysztof Kozlowski wrote:
>> On 10.12.2015 10:09, Chanwoo Choi wrote:
>>> On 2015년 12월 10일 09:44, Krzysztof Kozlowski wrote:
>>>> On 09.12.2015 13:07, Chanwoo Choi wrote:
>>>>> This patch adds the DMC (Dynamic Memory Controller) bus node for Exynos3250 SoC.
>>>>> The DMC is an AMBA AXI-compliant slave to interface external JEDEC standard
>>>>> SDRAM devices. The bus includes the OPP tables and the source clock for DMC
>>>>> block.
>>>>>
>>>>> Following list specifies the detailed relation between the clock and DMC block:
>>>>> - The source clock of DMC block : div_dmc
>>>>>
>>>>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>>>> ---
>>>>>  arch/arm/boot/dts/exynos3250.dtsi | 34 ++++++++++++++++++++++++++++++++++
>>>>>  1 file changed, 34 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>>>>> index 2f30d632f1cc..7214c5e42150 100644
>>>>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>>>>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>>>>> @@ -687,6 +687,40 @@
>>>>>  			clock-names = "ppmu";
>>>>>  			status = "disabled";
>>>>>  		};
>>>>> +
>>>>> +		bus_dmc: bus_dmc {
>>>>> +			compatible = "samsung,exynos-bus";
>>>>> +			clocks = <&cmu_dmc CLK_DIV_DMC>;
>>>>> +			clock-names = "bus";
>>>>> +			operating-points-v2 = <&bus_dmc_opp_table>;
>>>>> +			status = "disabled";
>>>>> +		};
>>>>> +
>>>>> +		bus_dmc_opp_table: opp_table1 {
>>>>
>>>> This is the firsy opp_table, right? So:
>>>> s/opp_table1/opp_table0/
>>>
>>> Right. It is first opp_table in exynos3250.dtsi.
>>> But, I'm considering the OPP table of CPU freqeuncy as opp_table0.
>>> So, I have the plan that support the operation-points-v2 for Exynos3250 CPU.
>>
>> Ok
>>
>>>
>>>>
>>>>> +			compatible = "operating-points-v2";
>>>>> +			opp-shared;
>>>>> +
>>>>> +			opp00 {
>>>>> +				opp-hz = /bits/ 64 <50000000>;
>>>>> +				opp-microvolt = <800000>;
>>>>> +			};
>>>>> +			opp01 {
>>>>> +				opp-hz = /bits/ 64 <100000000>;
>>>>> +				opp-microvolt = <800000>;
>>>>> +			};
>>>>> +			opp02 {
>>>>> +				opp-hz = /bits/ 64 <134000000>;
>>>>> +				opp-microvolt = <800000>;
>>>>
>>>> Why 134, not 133 MHz?
>>>
>>> When I used the 133000000, the source clock is changed to 100Mhz instead of 133MHz.
>>> I add following test result on exynos3250-rinato board.
>>>
>>> Case1.
>>> When I use the 134 MHz, the source clock is changed to 133MHz
>>> : exynos-bus soc:bus_dmc: old_freq(200000000) -> new_freq (134000000) (real: 133333334)
>>>
>>> Case2.
>>> When I use the 133 MHz, the source clock is changed to 100MHz
>>> : exynos-bus soc:bus_dmc: old_freq(200000000) -> new_freq (133000000) (real: 100000000)
>>
>> Now I remember that issue. You could use here directly 133333334 but
>> that also would look a little bit weird... so 134 is ok for me. Could
>> just add a comment that desired frequency is actually "133 MHz"?
> 
> Do you prefer among following example?
> 
> Example1.
> 	opp02 {
> 		/* The desired frequency is 133MHz because
> 		 * clock change has the dependency on clock driver.
> 		 * When set rate as 134MHz, the clock driver would
> 		 * change the 133MHz actually instead of 134MHz.
> 		 */
> 		opp-hz = /bits/ 64 <134000000>;
> 		opp-microvolt = <800000>;
> 	};
> 
> Example2.
> 	opp02 {
> 		opp-hz = /bits/ 64 <133333334>;
> 		opp-microvolt = <800000>;
> 	};

I would prefer the second one (133333334) but I don't have strong
feelings about it.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux