Re: [PATCH v2 03/19] ARM: dts: Add DMC bus node for Exynos3250

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10.12.2015 10:09, Chanwoo Choi wrote:
> On 2015년 12월 10일 09:44, Krzysztof Kozlowski wrote:
>> On 09.12.2015 13:07, Chanwoo Choi wrote:
>>> This patch adds the DMC (Dynamic Memory Controller) bus node for Exynos3250 SoC.
>>> The DMC is an AMBA AXI-compliant slave to interface external JEDEC standard
>>> SDRAM devices. The bus includes the OPP tables and the source clock for DMC
>>> block.
>>>
>>> Following list specifies the detailed relation between the clock and DMC block:
>>> - The source clock of DMC block : div_dmc
>>>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>> ---
>>>  arch/arm/boot/dts/exynos3250.dtsi | 34 ++++++++++++++++++++++++++++++++++
>>>  1 file changed, 34 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>>> index 2f30d632f1cc..7214c5e42150 100644
>>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>>> @@ -687,6 +687,40 @@
>>>  			clock-names = "ppmu";
>>>  			status = "disabled";
>>>  		};
>>> +
>>> +		bus_dmc: bus_dmc {
>>> +			compatible = "samsung,exynos-bus";
>>> +			clocks = <&cmu_dmc CLK_DIV_DMC>;
>>> +			clock-names = "bus";
>>> +			operating-points-v2 = <&bus_dmc_opp_table>;
>>> +			status = "disabled";
>>> +		};
>>> +
>>> +		bus_dmc_opp_table: opp_table1 {
>>
>> This is the firsy opp_table, right? So:
>> s/opp_table1/opp_table0/
> 
> Right. It is first opp_table in exynos3250.dtsi.
> But, I'm considering the OPP table of CPU freqeuncy as opp_table0.
> So, I have the plan that support the operation-points-v2 for Exynos3250 CPU.

Ok

> 
>>
>>> +			compatible = "operating-points-v2";
>>> +			opp-shared;
>>> +
>>> +			opp00 {
>>> +				opp-hz = /bits/ 64 <50000000>;
>>> +				opp-microvolt = <800000>;
>>> +			};
>>> +			opp01 {
>>> +				opp-hz = /bits/ 64 <100000000>;
>>> +				opp-microvolt = <800000>;
>>> +			};
>>> +			opp02 {
>>> +				opp-hz = /bits/ 64 <134000000>;
>>> +				opp-microvolt = <800000>;
>>
>> Why 134, not 133 MHz?
> 
> When I used the 133000000, the source clock is changed to 100Mhz instead of 133MHz.
> I add following test result on exynos3250-rinato board.
> 
> Case1.
> When I use the 134 MHz, the source clock is changed to 133MHz
> : exynos-bus soc:bus_dmc: old_freq(200000000) -> new_freq (134000000) (real: 133333334)
> 
> Case2.
> When I use the 133 MHz, the source clock is changed to 100MHz
> : exynos-bus soc:bus_dmc: old_freq(200000000) -> new_freq (133000000) (real: 100000000)

Now I remember that issue. You could use here directly 133333334 but
that also would look a little bit weird... so 134 is ok for me. Could
just add a comment that desired frequency is actually "133 MHz"?

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux