Re: [PATCH 2/3] ARM: dts: Add DT changes for display on peach_pit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Aug 23, 2014 at 4:05 PM, Andreas Färber <afaerber@xxxxxxx> wrote:
> Am 25.07.2014 21:44, schrieb Ajay Kumar:
>> Add DT nodes for ps8622 bridge chip and panel-simple panel.
>
> "simple-panel"
Ok.

>> Add backlight power supply for pwm-backlight.
>> Also add bridge phandle needed by dp to enable display on peach_pit.
>
> Note that peach_pi[t] is inconsistent with the file names being
> peach-pi[t] here and in the two subjects.
Ok.
>>
>> Note that, peach_pit doesn't support "chunghwa,claa101wb01" panel,
>> but still we choose to reuse the binding since "chunghwa,claa101wb01"
>> has similar LCD timings.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/exynos5420-peach-pit.dts |   36 +++++++++++++++-------------
>>  1 file changed, 19 insertions(+), 17 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
>> index 228a6b1..79beba8 100644
>> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
>> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
>> @@ -30,11 +30,12 @@
>>               i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
>>       };
>>
>> -     backlight {
>> +     backlight: backlight {
>>               compatible = "pwm-backlight";
>>               pwms = <&pwm 0 1000000 0>;
>>               brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
>>               default-brightness-level = <7>;
>> +             power-supply = <&tps65090_fet1>;
>>               pinctrl-0 = <&pwm0_out>;
>>               pinctrl-names = "default";
>>       };
>> @@ -100,6 +101,12 @@
>>               regulator-boot-on;
>>               regulator-always-on;
>>       };
>> +
>> +     panel: panel-simple {
>
> Just "panel"? (AF)
>
>> +             compatible = "chunghwa,claa101wb01", "simple-panel";
>
> Drop "simple-panel" (Thierry)
Right.

>> +             power-supply = <&tps65090_fet6>;
>> +             backlight = <&backlight>;
>> +     };
>>  };
>>
>>  &dp {
>> @@ -113,22 +120,7 @@
>>       samsung,link-rate = <0x06>;
>>       samsung,lane-count = <2>;
>>       samsung,hpd-gpio = <&gpx2 6 0>;
>> -
>> -     display-timings {
>> -             native-mode = <&timing1>;
>> -
>> -             timing1: timing@1 {
>> -                     clock-frequency = <70589280>;
>> -                     hactive = <1366>;
>> -                     vactive = <768>;
>> -                     hfront-porch = <40>;
>> -                     hback-porch = <40>;
>> -                     hsync-len = <32>;
>> -                     vback-porch = <10>;
>> -                     vfront-porch = <12>;
>> -                     vsync-len = <6>;
>> -             };
>> -     };
>> +     bridge = <&ps8625>;
>>  };
>>
>>  &fimd {
>> @@ -155,6 +147,16 @@
>>               pinctrl-names = "default";
>>               pinctrl-0 = <&max98090_irq>;
>>       };
>> +
>> +     ps8625: ps8625-bridge@48 {
>
> "lvds-bridge"? (AF)
Ok.

I will fix all these nits and resend along with the driver patches.

Ajay

>> +             compatible = "parade,ps8625";
>> +             reg = <0x48>;
>> +             sleep-gpios = <&gpx3 5 0>;
>> +             reset-gpios = <&gpy7 7 0>;
>> +             lane-count = <2>;
>> +             panel = <&panel>;
>> +             backlight = <&backlight>;
>> +     };
>>  };
>>
>>  &hsi2c_9 {
>
> Regards,
> Andreas
>
> --
> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux