Does warm reset while activating SuperSpeed HUBs if the hub activate type is HUB_RESET_RESUME. When we do Suspend-to-RAM with (any one of the 16, 32, 64 Jetflash) transcend USB 3.0 device connected on 3.0 port, during resume I noticed that the XHCI controller has moved to sometimes RECOVERY, POLLING or INACTIVE STATE. This behaviour is inconsistent and the connection with connected USB 3.0 device on 3.0 port was LOST. Doing warm reset while activating SuperSpeed HUBs if the hub activate type is HUB_RESET_RESUME, gets the connected device to the stable state. Reviewed at https://chromium-review.googlesource.com/#/c/177132/ Tested on exynos5420 and exynos5250 with Transcend Jetflash USB 3.0 device (8564:1000) rebased on Greg Kroah-Hartman's usb-next git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git Signed-off-by: Vikas Sajjan <vikas.sajjan@xxxxxxxxxxx> --- drivers/usb/core/hub.c | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a7c04e2..d8432b0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -993,6 +993,21 @@ int usb_remove_device(struct usb_device *udev) return 0; } +#define PORT_RESET_TRIES 5 +#define SET_ADDRESS_TRIES 2 +#define GET_DESCRIPTOR_TRIES 2 +#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) +#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first) + +#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ +#define HUB_SHORT_RESET_TIME 10 +#define HUB_BH_RESET_TIME 50 +#define HUB_LONG_RESET_TIME 200 +#define HUB_RESET_TIMEOUT 800 + +static int hub_port_reset(struct usb_hub *hub, int port1, + struct usb_device *udev, unsigned int delay, bool warm); + enum hub_activation_type { HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */ HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, @@ -1093,6 +1108,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) u16 portstatus, portchange; portstatus = portchange = 0; + + /* Some connected devices might be still in unknown state even + * after reset-resume, a WARM_RESET gets the connected device + * to the normal state. + */ + if (udev && hub_is_superspeed(hub->hdev) && + type == HUB_RESET_RESUME) + hub_port_reset(hub, port1, NULL, + HUB_BH_RESET_TIME, true); + status = hub_port_status(hub, port1, &portstatus, &portchange); if (udev || (portstatus & USB_PORT_STAT_CONNECTION)) dev_dbg(hub->intfdev, @@ -2510,22 +2535,6 @@ static unsigned hub_is_wusb(struct usb_hub *hub) return hcd->wireless; } - -#define PORT_RESET_TRIES 5 -#define SET_ADDRESS_TRIES 2 -#define GET_DESCRIPTOR_TRIES 2 -#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1)) -#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first) - -#define HUB_ROOT_RESET_TIME 50 /* times are in msec */ -#define HUB_SHORT_RESET_TIME 10 -#define HUB_BH_RESET_TIME 50 -#define HUB_LONG_RESET_TIME 200 -#define HUB_RESET_TIMEOUT 800 - -static int hub_port_reset(struct usb_hub *hub, int port1, - struct usb_device *udev, unsigned int delay, bool warm); - /* Is a USB 3.0 port in the Inactive or Complinance Mode state? * Port worm reset is required to recover */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |