Re: [PATCH v4 0/8] clk: renesas: rzg2l: Add support for power domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 24 Apr 2024 at 16:34, Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Ulf,
>
> On Mon, Apr 22, 2024 at 12:54 PM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
> > From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >
> > Series adds support for power domains on rzg2l driver.
> >
> > RZ/G2L kind of devices support a functionality called MSTOP (module
> > stop/standby). According to hardware manual the module could be switch
> > to standby after its clocks are disabled. The reverse order of operation
> > should be done when enabling a module (get the module out of standby,
> > enable its clocks etc).
> >
> > In [1] the MSTOP settings were implemented by adding code in driver
> > to attach the MSTOP state to the IP clocks. But it has been proposed
> > to implement it as power domain. The result is this series.
> >
> > The DT bindings were updated with power domain IDs (plain integers
> > that matches the DT with driver data structures). The current DT
> > bindings were updated with module IDs for the modules listed in tables
> > with name "Registers for Module Standby Mode" (see HW manual) exception
> > being RZ/G3S where, due to the power down functionality, the DDR,
> > TZCDDR, OTFDE_DDR were also added.
> >
> > Domain IDs were added to all SoC specific bindings.
> >
> > Thank you,
> > Claudiu Beznea
> >
> > Changes in v4:
> > - dropped the pwrdn functionality until it is better understanded
> > - dropped patch "clk: renesas: rzg2l-cpg: Add suspend/resume
> >   support for power domains" from v3; this will be replaced
> >   by propertly calling device_set_wakup_path() in serial console
> >   driver
> > - instantiated the watchdog domain in r8a08g045 clock driver; this
> >   allow applying r9a08g045 clock patch w/o affecting watchdog and later,
> >   after all good with watchdog patches series at [2], only patch
> >   "arm64: dts: renesas: r9a08g045: Update #power-domain-cells = <1>"
> >   will need to be applied
>
> Are you happy with this series?  I would like to queue patches 1-7 in
> renesas-clk for v6.10 (i.e. this week).

Yes, the series looks good to me! For the series, feel free to add:

Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

Kind regards
Uffe





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux