Factor out the parts on the White Hawk CPU board that are also present
on the White Hawk Single board, so they can be reused when introducing
support for the latter.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
.../dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 363 +-----------------
...wk-cpu.dtsi => white-hawk-cpu-common.dtsi} | 24 +-
2 files changed, 13 insertions(+), 374 deletions(-)
copy arch/arm64/boot/dts/renesas/{r8a779g0-white-hawk-cpu.dtsi => white-hawk-cpu-common.dtsi} (97%)
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
index 4dcbe50fabb6f0db..b1fe1aedc27d151d 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -6,370 +6,9 @@
*/
#include "r8a779g0.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "white-hawk-cpu-common.dtsi"
/ {
model = "Renesas White Hawk CPU board";
compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0";
-
- aliases {
- ethernet0 = &avb0;
- serial0 = &hscif0;
- };
-
- chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
- stdout-path = "serial0:921600n8";
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&keys_pins>;
- pinctrl-names = "default";
-
- key-1 {
- gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_1>;
- label = "SW47";
- wakeup-source;
- debounce-interval = <20>;
- };
-
- key-2 {
- gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_2>;
- label = "SW48";
- wakeup-source;
- debounce-interval = <20>;
- };
-
- key-3 {
- gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_3>;
- label = "SW49";
- wakeup-source;
- debounce-interval = <20>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led-1 {
- gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <1>;
- };
-
- led-2 {
- gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <2>;
- };
-
- led-3 {
- gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_INDICATOR;
- function-enumerator = <3>;
- };
- };
-
- memory@48000000 {
- device_type = "memory";
- /* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x78000000>;
- };
-
- memory@480000000 {
- device_type = "memory";
- reg = <0x4 0x80000000 0x0 0x80000000>;
- };
-
- memory@600000000 {
- device_type = "memory";
- reg = <0x6 0x00000000 0x1 0x00000000>;
- };
-
- mini-dp-con {
- compatible = "dp-connector";
- label = "CN5";
- type = "mini";
-
- port {
- mini_dp_con_in: endpoint {
- remote-endpoint = <&sn65dsi86_out>;
- };
- };
- };
-
- reg_1p2v: regulator-1p2v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.2V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- sn65dsi86_refclk: clk-x6 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <38400000>;
- };
-};
-
-&avb0 {
- pinctrl-0 = <&avb0_pins>;
- pinctrl-names = "default";
- phy-handle = <&phy0>;
- tx-internal-delay-ps = <2000>;
- status = "okay";
-
- phy0: ethernet-phy@0 {
- compatible = "ethernet-phy-id0022.1622",
- "ethernet-phy-ieee802.3-c22";
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio7>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
- };
-};
-
-&dsi0 {
- status = "okay";
-
- ports {
- port@1 {
- dsi0_out: endpoint {
- remote-endpoint = <&sn65dsi86_in>;
- data-lanes = <1 2 3 4>;
- };
- };
- };
-};
-
-&du {
- status = "okay";
-};
-
-&extal_clk {
- clock-frequency = <16666666>;
-};
-
-&extalr_clk {
- clock-frequency = <32768>;
-};
-
-&hscif0 {
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- io_expander_a: gpio@20 {
- compatible = "onnn,pca9654";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- eeprom@50 {
- compatible = "rohm,br24g01", "atmel,24c01";
- label = "cpu-board";
- reg = <0x50>;
- pagesize = <8>;
- };
-};
-
-&i2c1 {
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- bridge@2c {
- compatible = "ti,sn65dsi86";
- reg = <0x2c>;
-
- clocks = <&sn65dsi86_refclk>;
- clock-names = "refclk";
-
- interrupt-parent = <&intc_ex>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
- enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-
- vccio-supply = <®_1p8v>;
- vpll-supply = <®_1p8v>;
- vcca-supply = <®_1p2v>;
- vcc-supply = <®_1p2v>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- sn65dsi86_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- sn65dsi86_out: endpoint {
- remote-endpoint = <&mini_dp_con_in>;
- };
- };
- };
- };
-};
-
-&mmc0 {
- pinctrl-0 = <&mmc_pins>;
- pinctrl-1 = <&mmc_pins>;
- pinctrl-names = "default", "state_uhs";
-
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- bus-width = <8>;
- no-sd;
- no-sdio;
- non-removable;
- full-pwr-cycle-in-suspend;
- status = "okay";
-};
-
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
- avb0_pins: avb0 {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
- "avb0_txcrefclk";
- function = "avb0";
- };
-
- pins_mdio {
- groups = "avb0_mdio";
- drive-strength = <21>;
- };
-
- pins_mii {
- groups = "avb0_rgmii";
- drive-strength = <21>;
- };
-
- };
- hscif0_pins: hscif0 {
- groups = "hscif0_data";
- function = "hscif0";
- };
-
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
-
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
- };
-
- keys_pins: keys {
- pins = "GP_5_0", "GP_5_1", "GP_5_2";
- bias-pull-up;
- };
-
- mmc_pins: mmc {
- groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
- function = "mmc";
- power-source = <1800>;
- };
-
- qspi0_pins: qspi0 {
- groups = "qspi0_ctrl", "qspi0_data4";
- function = "qspi0";
- };
-
- scif_clk_pins: scif_clk {
- groups = "scif_clk";
- function = "scif_clk";
- };
-};
-
-&rpc {
- pinctrl-0 = <&qspi0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash@0 {
- compatible = "spansion,s25fs512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
- spi-rx-bus-width = <4>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- boot@0 {
- reg = <0x0 0x1200000>;
- read-only;
- };
- user@1200000 {
- reg = <0x1200000 0x2e00000>;
- };
- };
- };
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
-&scif_clk {
- clock-frequency = <24000000>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
similarity index 97%
copy from arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
copy to arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
index 4dcbe50fabb6f0db..8ac17370ff3661c2 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/white-hawk-cpu-common.dtsi
@@ -1,20 +1,16 @@
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
- * Device Tree Source for the R-Car V4H White Hawk CPU board
+ * Device Tree Source for the common parts shared by the White Hawk CPU and
+ * White Hawk Single boards
*
* Copyright (C) 2022 Renesas Electronics Corp.
*/
-#include "r8a779g0.dtsi"
-
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
- model = "Renesas White Hawk CPU board";
- compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0";
-
aliases {
ethernet0 = &avb0;
serial0 = &hscif0;
@@ -25,6 +21,12 @@ chosen {
stdout-path = "serial0:921600n8";
};
+ sn65dsi86_refclk: clk-x6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+
keys {
compatible = "gpio-keys";
@@ -135,12 +137,6 @@ reg_3p3v: regulator-3p3v {
regulator-boot-on;
regulator-always-on;
};
-
- sn65dsi86_refclk: clk-x6 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <38400000>;
- };
};
&avb0 {
@@ -187,6 +183,9 @@ &extalr_clk {
};
&hscif0 {
+ pinctrl-0 = <&hscif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
@@ -300,6 +299,7 @@ pins_mii {
};
};
+
hscif0_pins: hscif0 {
groups = "hscif0_data";
function = "hscif0";
--
2.34.1
