The device_get_match_data(), is to get match data for firmware interfaces
such as just OF/ACPI. This driver has I2C matching table as well. Use
i2c_get_match_data() to get match data for I2C, ACPI and DT-based
matching.
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
Note:
This patch is based on the work done for rtc-isl1208 and is compile
tested.
---
drivers/clk/clk-versaclock7.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-versaclock7.c b/drivers/clk/clk-versaclock7.c
index 9babb7913c1c..be91aeada81c 100644
--- a/drivers/clk/clk-versaclock7.c
+++ b/drivers/clk/clk-versaclock7.c
@@ -1109,7 +1109,9 @@ static int vc7_probe(struct i2c_client *client)
i2c_set_clientdata(client, vc7);
vc7->client = client;
- vc7->chip_info = device_get_match_data(&client->dev);
+ vc7->chip_info = i2c_get_match_data(client);
+ if (!vc7->chip_info)
+ return -ENODEV;
vc7->pin_xin = devm_clk_get(&client->dev, "xin");
if (PTR_ERR(vc7->pin_xin) == -EPROBE_DEFER) {
--
2.25.1
