The device_get_match_data(), is to get match data for firmware interfaces such as just OF/ACPI. This driver has I2C matching table as well. Use i2c_get_match_data() to get match data for I2C, ACPI and DT-based matching. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- Note: This patch is based on the work done for rtc-isl1208 and is compile tested. --- drivers/clk/clk-versaclock5.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c index 8bc54176f325..4197991803ba 100644 --- a/drivers/clk/clk-versaclock5.c +++ b/drivers/clk/clk-versaclock5.c @@ -956,7 +956,9 @@ static int vc5_probe(struct i2c_client *client) i2c_set_clientdata(client, vc5); vc5->client = client; - vc5->chip_info = device_get_match_data(&client->dev); + vc5->chip_info = i2c_get_match_data(client); + if (!vc5->chip_info) + return -ENODEV; vc5->pin_xin = devm_clk_get(&client->dev, "xin"); if (PTR_ERR(vc5->pin_xin) == -EPROBE_DEFER) -- 2.25.1
