As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) is clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.
Hence change the parent clocks for the SCIF modules from the S0D12_PER
clock to the SASYNCPERD4 clock (which has the same clock rate), cfr.
R-Car S4-8 Hardware User's Manual rev. 0.81.
Fixes: 24aaff6a6ce4 ("clk: renesas: cpg-mssr: Add support for R-Car S4-8")
Reported-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/clk/renesas/r8a779f0-cpg-mssr.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/r8a779f0-cpg-mssr.c b/drivers/clk/renesas/r8a779f0-cpg-mssr.c
index fd1462425316..800fdc104edd 100644
--- a/drivers/clk/renesas/r8a779f0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a779f0-cpg-mssr.c
@@ -144,10 +144,10 @@ static const struct mssr_mod_clk r8a779f0_mod_clks[] __initconst = {
DEF_MOD("msiof3", 621, R8A779F0_CLK_MSO),
DEF_MOD("pcie0", 624, R8A779F0_CLK_S0D2),
DEF_MOD("pcie1", 625, R8A779F0_CLK_S0D2),
- DEF_MOD("scif0", 702, R8A779F0_CLK_S0D12_PER),
- DEF_MOD("scif1", 703, R8A779F0_CLK_S0D12_PER),
- DEF_MOD("scif3", 704, R8A779F0_CLK_S0D12_PER),
- DEF_MOD("scif4", 705, R8A779F0_CLK_S0D12_PER),
+ DEF_MOD("scif0", 702, R8A779F0_CLK_SASYNCPERD4),
+ DEF_MOD("scif1", 703, R8A779F0_CLK_SASYNCPERD4),
+ DEF_MOD("scif3", 704, R8A779F0_CLK_SASYNCPERD4),
+ DEF_MOD("scif4", 705, R8A779F0_CLK_SASYNCPERD4),
DEF_MOD("sdhi0", 706, R8A779F0_CLK_SD0),
DEF_MOD("sys-dmac0", 709, R8A779F0_CLK_S0D3_PER),
DEF_MOD("sys-dmac1", 710, R8A779F0_CLK_S0D3_PER),
--
2.35.1
