Add support for selecting host speed mode. For now, only support 1000M bps. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- drivers/net/phy/marvell10g.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 383a9c9f36e5..daf3242c6078 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -101,6 +101,10 @@ enum { MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS = BIT(13), MV_AN_21X0_SERDES_CTRL2_RUN_INIT = BIT(15), + MV_MOD_CONF = 0xf000, + MV_MOD_CONF_SPEED_MASK = 0x00c0, + MV_MOD_CONF_SPEED_1000 = BIT(7), + /* These registers appear at 0x800X and 0xa00X - the 0xa00X control * registers appear to set themselves to the 0x800X when AN is * restarted, but status registers appear readable from either. @@ -147,6 +151,7 @@ struct mv3310_chip { int (*get_mactype)(struct phy_device *phydev); int (*set_mactype)(struct phy_device *phydev, int mactype); int (*select_mactype)(unsigned long *interfaces); + int (*set_macspeed)(struct phy_device *phydev, int macspeed); int (*init_interface)(struct phy_device *phydev, int mactype); #ifdef CONFIG_HWMON @@ -644,6 +649,16 @@ static int mv2110_select_mactype(unsigned long *interfaces) return -1; } +static int mv2110_set_macspeed(struct phy_device *phydev, int macspeed) +{ + if (macspeed != SPEED_1000) + return -EOPNOTSUPP; + + return phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_MOD_CONF, + MV_MOD_CONF_SPEED_MASK, + MV_MOD_CONF_SPEED_1000); +} + static int mv3310_get_mactype(struct phy_device *phydev) { int mactype; @@ -778,6 +793,13 @@ static int mv3310_config_init(struct phy_device *phydev) if (err) return err; + /* If host provided host mac speed, try to set the mac speed */ + if (phydev->host_speed && chip->set_macspeed) { + err = chip->set_macspeed(phydev, phydev->host_speed); + if (err) + return err; + } + /* If host provided host supported interface modes, try to select the * best one */ @@ -1181,6 +1203,7 @@ static const struct mv3310_chip mv2110_type = { .get_mactype = mv2110_get_mactype, .set_mactype = mv2110_set_mactype, .select_mactype = mv2110_select_mactype, + .set_macspeed = mv2110_set_macspeed, .init_interface = mv2110_init_interface, #ifdef CONFIG_HWMON -- 2.25.1