On Wed, Oct 19, 2022 at 12:44:42PM +0200, Marek Behún wrote: > On Wed, 19 Oct 2022 17:50:49 +0900 > Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> wrote: > > > R-Car S4-8 environment board requires to change the host interface > > as SGMII and the host speed as 1000 Mbps because the strap pin was > > other mode, but the SoC/board cannot work on that mode. Also, after > > the SoC initialized the SERDES once, we cannot re-initialized it > > because the initialized procedure seems all black magic... > > Can you tell us which exact mode is configured by the strapping pins? > Isn't it sufficient to just set the MACTYPE to SGMII, without > configuring speed? (To Yoshihiro Shimoda) Please note that I don't seem to have the patches to review - and as maintainer of the driver, I therefore NAK this series until I can review it. I'm guessing the reason I don't have them is: 2022-10-19 09:51:17 H=relmlor1.renesas.com (relmlie5.idc.renesas.com) [210.160.252.171]:58218 I=[78.32.30.218]:25 F=<> rejected RCPT <linux@xxxxxxxxxxxxxxx>: Faked bounce 2022-10-19 09:51:17 H=relmlor2.renesas.com (relmlie6.idc.renesas.com) [210.160.252.172]:24399 I=[78.32.30.218]:25 F=<> rejected RCPT <linux@xxxxxxxxxxxxxxx>: Faked bounce 2022-10-19 09:51:18 H=relmlor1.renesas.com (relmlie5.idc.renesas.com) [210.160.252.171]:58218 I=[78.32.30.218]:25 F=<> rejected RCPT <linux@xxxxxxxxxxxxxxx>: Faked bounce 2022-10-19 09:51:19 H=relmlor1.renesas.com (relmlie5.idc.renesas.com) [210.160.252.171]:58218 I=[78.32.30.218]:25 F=<> rejected RCPT <linux@xxxxxxxxxxxxxxx>: Faked bounce Why are you sending patches using the NULL envelope sender - this is a common trick used by spammers and scammers to get their messages through. Please don't. (In case anyone questions this - as all my email is sent from encoded envelope from addresses rather than my published addresses, bounces do still work.) Thanks. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
