[PATCH] Documentation: i2c: fix references to other documents

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Similar to commit fe99b819487d ("docs: i2c: i2c-sysfs: fix hyperlinks"),
make other links in documentation consistent with the preferred way.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 Documentation/i2c/dev-interface.rst   | 2 +-
 Documentation/i2c/slave-interface.rst | 6 +++---
 Documentation/i2c/writing-clients.rst | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/i2c/dev-interface.rst b/Documentation/i2c/dev-interface.rst
index 73ad34849f99..c277a8e1202b 100644
--- a/Documentation/i2c/dev-interface.rst
+++ b/Documentation/i2c/dev-interface.rst
@@ -148,7 +148,7 @@ You can do plain I2C transactions by using read(2) and write(2) calls.
 You do not need to pass the address byte; instead, set it through
 ioctl I2C_SLAVE before you try to access the device.
 
-You can do SMBus level transactions (see documentation file smbus-protocol
+You can do SMBus level transactions (see documentation file smbus-protocol.rst
 for details) through the following functions::
 
   __s32 i2c_smbus_write_quick(int file, __u8 value);
diff --git a/Documentation/i2c/slave-interface.rst b/Documentation/i2c/slave-interface.rst
index 82ea3e1d6fe4..58fb143baee4 100644
--- a/Documentation/i2c/slave-interface.rst
+++ b/Documentation/i2c/slave-interface.rst
@@ -32,9 +32,9 @@ User manual
 ===========
 
 I2C slave backends behave like standard I2C clients. So, you can instantiate
-them as described in the document 'instantiating-devices'. The only difference
-is that i2c slave backends have their own address space. So, you have to add
-0x1000 to the address you would originally request. An example for
+them as described in the document instantiating-devices.rst. The only
+difference is that i2c slave backends have their own address space. So, you
+have to add 0x1000 to the address you would originally request. An example for
 instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64
 on bus 1::
 
diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst
index e3b126cf4a3b..47f7cbf4ed1a 100644
--- a/Documentation/i2c/writing-clients.rst
+++ b/Documentation/i2c/writing-clients.rst
@@ -364,7 +364,7 @@ stop condition is issued between transaction. The i2c_msg structure
 contains for each message the client address, the number of bytes of the
 message and the message data itself.
 
-You can read the file ``i2c-protocol`` for more information about the
+You can read the file i2c-protocol.rst for more information about the
 actual I2C protocol.
 
 
@@ -414,7 +414,7 @@ transactions return 0 on success; the 'read' transactions return the read
 value, except for block transactions, which return the number of values
 read. The block buffers need not be longer than 32 bytes.
 
-You can read the file ``smbus-protocol`` for more information about the
+You can read the file smbus-protocol.rst for more information about the
 actual SMBus protocol.
 
 
-- 
2.35.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux