Document the CRU block found on Renesas RZ/G2L SoC's. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- .../bindings/media/renesas,rzg2l-cru.yaml | 227 ++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml new file mode 100644 index 000000000000..7b2835810516 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml @@ -0,0 +1,227 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2021 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU) + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> + +description: + The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input + capabilities for the Renesas RZ/G2L family of devices. + + Depending on the instance the Image Processing input is connected to + external SoC pins or to a CSI-2 receiver. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r9a07g044-cru # RZ/G2{L,LC} + - const: renesas,rzg2l-cru + + reg: + maxItems: 1 + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: csi2_link_int + - const: image_conv_int + - const: image_conv_err_int + - const: axi_mst_err_int + + clocks: + items: + - description: Internal clock for connecting CRU and MIPI + - description: CRU Main clock + - description: CPU Register access clock + - description: CRU image transfer clock + + clock-names: + items: + - const: sysclk + - const: vclk + - const: pclk + - const: aclk + + power-domains: + maxItems: 1 + + resets: + items: + - description: CRU_CMN_RSTB reset terminal + - description: CRU_PRESETN reset terminal + - description: CRU_ARESETN reset terminal + + reset-names: + items: + - const: cmn-rstb + - const: presetn + - const: aresetn + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing a parallel input source. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + hsync-active: true + + vsync-active: true + + bus-width: true + + data-shift: true + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + maxItems: 1 + + required: + - clock-lanes + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Output port node, describing the RZ/G2L Image Processing module + connected the CSI-2 receiver + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to CSI2. + + anyOf: + - required: + - endpoint@0 + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Input port node, describing the RZ/G2L CSI-2 module connected the + Image Processing block. + + properties: + endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint + description: Endpoint connected to CSI2. + + anyOf: + - required: + - endpoint@0 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + +additionalProperties: false + +examples: + # Device node example with CSI-2 + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cru: video@10830000 { + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; + reg = <0x10830000 0x10000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csi2_link_int", "image_conv_int", + "image_conv_err_int", "axi_mst_err_int"; + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; + clock-names = "sysclk", "vclk", "pclk", "aclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_CRU_CMN_RSTB>, + <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_ARESETN>; + reset-names = "cmn-rstb", "presetn", "aresetn"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi2_in: endpoint@0 { + reg = <0>; + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint= <&crucsi2>; + }; + }; + + port@3 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <3>; + + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint= <&csi2cru>; + }; + }; + }; + }; -- 2.17.1
