Re: [RFC PATCH 1/3] media: dt-bindings: media: Document RZ/G2L CRU block

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 07, 2021 at 01:23:49AM +0000, Lad Prabhakar wrote:
> Document the CRU block found on Renesas RZ/G2L SoC's.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  .../bindings/media/renesas,rzg2l-cru.yaml     | 227 ++++++++++++++++++
>  1 file changed, 227 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> new file mode 100644
> index 000000000000..7b2835810516
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -0,0 +1,227 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (C) 2021 Renesas Electronics Corp.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L Camera Data Receiving Unit (CRU)
> +
> +maintainers:
> +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> +
> +description:
> +  The RZ/G2L Camera Data Receiving Unit (CRU) device provides video input
> +  capabilities for the Renesas RZ/G2L family of devices.
> +
> +  Depending on the instance the Image Processing input is connected to
> +  external SoC pins or to a CSI-2 receiver.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:

Don't need oneOf with only 1 entry.

> +          - enum:
> +              - renesas,r9a07g044-cru     # RZ/G2{L,LC}
> +          - const: renesas,rzg2l-cru
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 4
> +
> +  interrupt-names:
> +    items:
> +      - const: csi2_link_int
> +      - const: image_conv_int
> +      - const: image_conv_err_int
> +      - const: axi_mst_err_int

_int is redundant.

> +
> +  clocks:
> +    items:
> +      - description: Internal clock for connecting CRU and MIPI
> +      - description: CRU Main clock
> +      - description: CPU Register access clock
> +      - description: CRU image transfer clock
> +
> +  clock-names:
> +    items:
> +      - const: sysclk
> +      - const: vclk
> +      - const: pclk
> +      - const: aclk
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: CRU_CMN_RSTB reset terminal
> +      - description: CRU_PRESETN reset terminal
> +      - description: CRU_ARESETN reset terminal
> +
> +  reset-names:
> +    items:
> +      - const: cmn-rstb
> +      - const: presetn
> +      - const: aresetn
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing a parallel input source.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              hsync-active: true
> +
> +              vsync-active: true
> +
> +              bus-width: true
> +
> +              data-shift: true
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port node, single endpoint describing the CSI-2 transmitter.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              clock-lanes:
> +                maxItems: 1
> +
> +              data-lanes:
> +                maxItems: 1
> +
> +            required:
> +              - clock-lanes
> +              - data-lanes
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output port node, describing the RZ/G2L Image Processing module
> +          connected the CSI-2 receiver
> +
> +        properties:
> +          endpoint@0:

Unless you have mutiple endpoints to define or endpoint properties to 
add, you don't need to specify anything more than the port.

> +            $ref: /schemas/graph.yaml#/properties/endpoint
> +            description: Endpoint connected to CSI2.
> +
> +        anyOf:
> +          - required:
> +              - endpoint@0
> +
> +      port@3:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Input port node, describing the RZ/G2L CSI-2 module connected the
> +          Image Processing block.
> +
> +        properties:
> +          endpoint@0:
> +            $ref: /schemas/graph.yaml#/properties/endpoint
> +            description: Endpoint connected to CSI2.
> +
> +        anyOf:
> +          - required:
> +              - endpoint@0
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> +  # Device node example with CSI-2
> +  - |
> +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    cru: video@10830000 {
> +            compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
> +            reg = <0x10830000 0x10000>;
> +            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "csi2_link_int", "image_conv_int",
> +                              "image_conv_err_int", "axi_mst_err_int";
> +            clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
> +                     <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
> +            clock-names = "sysclk", "vclk", "pclk", "aclk";
> +            power-domains = <&cpg>;
> +            resets = <&cpg R9A07G044_CRU_CMN_RSTB>,
> +                     <&cpg R9A07G044_CRU_PRESETN>,
> +                     <&cpg R9A07G044_CRU_ARESETN>;
> +            reset-names = "cmn-rstb", "presetn", "aresetn";
> +
> +            ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    port@1 {
> +                            #address-cells = <1>;
> +                            #size-cells = <0>;
> +
> +                            reg = <1>;
> +
> +                            csi2_in: endpoint@0 {
> +                                    reg = <0>;
> +                                    clock-lanes = <0>;
> +                                    data-lanes = <1 2>;
> +                                    remote-endpoint = <&ov5645_ep>;
> +                            };
> +                    };
> +
> +                    port@2 {
> +                            #address-cells = <1>;
> +                            #size-cells = <0>;
> +
> +                            reg = <2>;
> +
> +                            csi2cru: endpoint@0 {
> +                                    reg = <0>;
> +                                    remote-endpoint= <&crucsi2>;
> +                            };
> +                    };
> +
> +                    port@3 {
> +                            #address-cells = <1>;
> +                            #size-cells = <0>;
> +
> +                            reg = <3>;
> +
> +                            crucsi2: endpoint@0 {
> +                                    reg = <0>;
> +                                    remote-endpoint= <&csi2cru>;
> +                            };
> +                    };
> +            };
> +    };
> -- 
> 2.17.1
> 
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux