Re: [PATCH net-next 04/13] ravb: Add ptp_cfg_active to struct ravb_hw_info

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26.08.2021 9:20, Biju Das wrote:

[...]
There are some H/W differences for the gPTP feature between R-Car
Gen3, R-Car Gen2, and RZ/G2L as below.

1) On R-Car Gen3, gPTP support is active in config mode.
2) On R-Car Gen2, gPTP support is not active in config mode.
3) RZ/G2L does not support the gPTP feature.

Add a ptp_cfg_active hw feature bit to struct ravb_hw_info for
supporting gPTP active in config mode for R-Car Gen3.

    Wait, we've just done this ion the previous patch!

This patch also removes enum ravb_chip_id, chip_id from both struct
ravb_hw_info and struct ravb_private, as it is unused.

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
  drivers/net/ethernet/renesas/ravb.h      |  8 +-------
  drivers/net/ethernet/renesas/ravb_main.c | 12 +++++-------
  2 files changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb.h
b/drivers/net/ethernet/renesas/ravb.h
index 9ecf1a8c3ca8..209e030935aa 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -979,17 +979,11 @@ struct ravb_ptp {
  	struct ravb_ptp_perout perout[N_PER_OUT];  };

-enum ravb_chip_id {
-	RCAR_GEN2,
-	RCAR_GEN3,
-};
-
  struct ravb_hw_info {
  	const char (*gstrings_stats)[ETH_GSTRING_LEN];
  	size_t gstrings_size;
  	netdev_features_t net_hw_features;
  	netdev_features_t net_features;
-	enum ravb_chip_id chip_id;
  	int stats_len;
  	size_t max_rx_len;

    I would put the above in a spearte patch...

   Separate. :-)

  	unsigned aligned_tx: 1;
@@ -999,6 +993,7 @@ struct ravb_hw_info {
  	unsigned tx_counters:1;		/* E-MAC has TX counters */
  	unsigned multi_irqs:1;		/* AVB-DMAC and E-MAC has multiple
irqs */
  	unsigned no_ptp_cfg_active:1;	/* AVB-DMAC does not support gPTP
active in config mode */
+	unsigned ptp_cfg_active:1;	/* AVB-DMAC has gPTP support active in
config mode */

    Huh?

  };

  struct ravb_private {
[...]
@@ -2216,7 +2213,7 @@ static int ravb_probe(struct platform_device
*pdev)
  	INIT_LIST_HEAD(&priv->ts_skb_list);

  	/* Initialise PTP Clock driver */
-	if (info->chip_id != RCAR_GEN2)
+	if (info->ptp_cfg_active)
  		ravb_ptp_init(ndev, pdev);

    What's that? Didn't you touch this lie in patch #3?

    This seems lie a NAK bait... :-(

Please refer the original patch[1] which introduced gPTP support active in config mode.
I am sure this will clear all your doubts.

It hasn't. Why do we need 2 bit fields (1 "positive" and 1 "negative") for the same feature is beyond me.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/net/ethernet/renesas/ravb_main.c?h=next-20210825&id=f5d7837f96e53a8c9b6c49e1bc95cf0ae88b99e8

Regards,
Biju

MBR, Sergey



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux