Old SDHI instances have a default value for the reset register which
keeps it in reset state by default. So, when applying a hard reset we
need to manually leave the soft reset state as well. Later SDHI
instances have a different default value, the one we write manually now.
Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible")
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Geez, typical SDHI nastiness here...
Geert: I think this fixes the issue you saw on Koelsch. It works fine on
my Lager now at least. Can you please test and tag if all goes well?
It would be great to have this in 5.14 but it definately needs Geert's
confirmation first.
drivers/mmc/host/renesas_sdhi_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 6fc4cf3c9dce..a4407f391f66 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -561,6 +561,8 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host)
/* Unknown why but without polling reset status, it will hang */
read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100,
false, priv->rstc);
+ /* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */
+ sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
priv->needs_adjust_hs400 = false;
renesas_sdhi_set_clock(host, host->clk_cache);
} else if (priv->scc_ctl) {
--
2.30.2
