Re: [PATCH v3 07/11] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 30, 2021 at 11:29:36AM +0200, Geert Uytterhoeven wrote:
> Hi Biju,
> 
> Thanks for your patch!
> 
> On Wed, Jun 30, 2021 at 9:31 AM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > Document USB phy bindings for RZ/G2L SoC.
> >
> > RZ/G2L USB2.0 phy uses line ctrl register for OTG_ID pin changes. Apart
> > from this it uses a different OTG-BC interrupt bit for device recognition.
> 
> Nothing about resets? But see below...
> 
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > v2->v3
> >  * Created a new compatible for RZ/G2L as per Geert's suggestion.
> >  * Added resets required properties for RZ/G2L SoC.
> > ---
> >  .../bindings/phy/renesas,usb2-phy.yaml         | 18 ++++++++++++++++++
> >  1 file changed, 18 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > index d5dc5a3cdceb..a7e585ff28dc 100644
> > --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> > @@ -30,6 +30,9 @@ properties:
> >                - renesas,usb2-phy-r8a77995 # R-Car D3
> >            - const: renesas,rcar-gen3-usb2-phy
> >
> > +      - items:
> > +          - const: renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
> > +
> >    reg:
> >      maxItems: 1
> >
> > @@ -91,6 +94,21 @@ required:
> >    - clocks
> >    - '#phy-cells'
> >
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: renesas,usb2-phy-r9a07g044
> > +    then:
> > +      properties:
> > +        resets:
> > +          items:
> > +            - description: USB phy reset
> > +            - description: reset of USB 2.0 host side
> 
> Do you need the second reset?
> Looking at your .dtsi patch, the second reset is shared with ehci/ohci,
> so perhaps it makes sense to drop it from the phy node?

The existing binding has the host reset (and peripheral, but no phy 
reset). Was that a mistake too? Smells like collecting resources the 
driver happens to want, not what the h/w connections are.

Rob



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux