[PATCH v3 4/4] drm: rcar-du: Use drm_bridge_connector_init() helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use the drm_bridge_connector_init() helper to create a drm_connector for
each output, instead of relying on the bridge drivers doing so. Attach
the bridges with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to instruct
them not to create a connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
Changes since v2:

- Declare ret variable
---
 drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 26 ++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index ca3761772211..0daa8bba50f5 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -11,6 +11,7 @@
 #include <linux/slab.h>
 
 #include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_managed.h>
 #include <drm/drm_modeset_helper_vtables.h>
@@ -53,7 +54,9 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 			 struct device_node *enc_node)
 {
 	struct rcar_du_encoder *renc;
+	struct drm_connector *connector;
 	struct drm_bridge *bridge;
+	int ret;
 
 	/*
 	 * Locate the DRM bridge from the DT node. For the DPAD outputs, if the
@@ -103,9 +106,22 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 
 	renc->output = output;
 
-	/*
-	 * Attach the bridge to the encoder. The bridge will create the
-	 * connector.
-	 */
-	return drm_bridge_attach(&renc->base, bridge, NULL, 0);
+	/* Attach the bridge to the encoder. */
+	ret = drm_bridge_attach(&renc->base, bridge, NULL,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err(rcdu->dev, "failed to attach bridge for output %u\n",
+			output);
+		return ret;
+	}
+
+	/* Create the connector for the chain of bridges. */
+	connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
+	if (IS_ERR(connector)) {
+		dev_err(rcdu->dev,
+			"failed to created connector for output %u\n", output);
+		return PTR_ERR(connector);
+	}
+
+	return drm_connector_attach_encoder(connector, &renc->base);
 }
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux